Pat Realmanofgenius no problem I’ve just had tons of questions on mine. So I figured I’d do a full review. I finally upgraded my internet today so it’s a bit easier to do these longer videos.
Pat Realmanofgenius yeah I shot this then tried to uploaded it and was like two hours in and it’s hadn’t got through 10% of the first stage. Switched to 100bit internet for $5 more a month and uploaded this in about 30min all done from my phone.
Great video and discussion. The Hybrid was the first can I bought because it was so versatile. I opted to run it with DeadAir KyMo mounting system. I bought it mainly for rifle use and as a secondary pistol can if need be because I had an Osprey 45k. Now that I have three Deadair rifle cans it runs on my AR45 and I love it. If you are only ever going to buy one can to cover a bunch of hosts this is a great choice
Rhett Butler exactly I think it’s a good first can for people to run. Also with the deadair kymo mount is really nice I had used the taper mounts like the asr in the passed and just really liked it.
So, just to be sure, the DeadAir KyMo adapter will work with the Hybrid 46? And you need to buy a DeadAir KyMo for each weapon you want to be able to swap it to? Excuse me, but I know nothing about this. $249.00 is a bit expensive to be just guessing and hoping. Thank you.
I bought the keymo and installed the brakes on my rifles only to get my can and it doesn’t thread into the hybrid. Did you have an issue threading yours? I measured them with calibers and it should fit but it won’t thread
I have a SilencerCo Specwar in 30 cal., and a Saker K in 5.56. Been trying to get a Hybrid 46 for 5 months. My local shop just found a Hybrid 46 for me today! Bought it. Looking forward to getting it. Will work fine for my needs as a pistol suppressor. And work on some of my larger caliber rifles! The extra parts are pricey. But far less than more suppressors. Thanks for the great review! Now, if it would just work on my M82-A1! Ha-ha! I think I will get a dedicated 22LR and I can call it a day as far as suppressors go!
Okay , I went out and picked up the asr flashhider and the bravo asr mount and the lantac dragon asr for my 556 , dang I spent some but it's worth it , great Can !
@@powderburn4648 sorry for the late response , it was a good trip , I have been running this can a lot and having a lot of fun with it, a bunch of my friends have these in suppressor jail right now.
Thanks for this video. I’ve been goi g back in forth on getting a hybrid for my second can. I have a yhm resonator and it works fine but like the divers of the hybrid.
mulekicker 1919 i can say that the versatility of it makes it so noise. It’s likes thinking about most of what I own and saying yep I can suppress that.
Considering both the Hybrid and the Ruger 450BM. I have Dead Air Sandman K & L, Griffin 30SD, SilencerCo Octane 45K, and Liberty Regulator currently. The Hybrid is on the short list since it gives me a big bore rifle options and can be made to work with Dead Air Keymo and will work with the Octane mounts. A Ruger American 450 Bush Master review would be cool. I have had several bolt guns over the years but my Main is a Tikka CTR 308, and I recently got a TC compass 300WM.
No problem. I plan on doing a full review on my 450 bushmaster ruger American this spring. I have been fighting with crap internet for a few years. Finally got good internet again and will be doing a few more videos soon. Working on getting some editing software to make it easy. You can go watch my other videos with the 450 bushmaster in them. There’s one with the black butterfly 425gr buzzsaw subs.
i have one in jail.. quick question.. I plan to use her for 9mm, 350 legend and some 762 out of an ar47.. I should be good with just a 9mm front cap.. correct ? thanks
Correct all that can go through the 9mm end cap. The 763 May sound better out if a 30cal end cap but will be better out of the 9mm then the 46cal it comes with.
Well i just want to say thanks for the knowledge! I have the omega can from back when it was knew. Sure wish i could have the option of the hybrid to start with. I have a question for you and maybe you have some more knowledge to give. I started with a kights armament usp 45 sepressor that i would like to use on other fixed rifles and pistals too. Where can i get pistons and piston sleeves for the suppressor? All platforms would be for 45 pressurs and lower. Thanks!
Can I run this on 22lr in moderation without dirtying it up too much? Rabbits are invading the garden and unsuppressed I get one every couple days but suppressed I feel I could drop multiples
I want this to use on my 223 and going to get a 300 blackout soon and 9mm banshee. So what all parts do I need for them 3 rounds? I’m thinking I will only buy the end cap for the 223. Just use the cap that comes with it for the 9mm not sure if need the 300 end cap? But I do want it to shoot sub and super sonic rounds. I have no idea what ever I need to order when I place the order. As far as the Inside stuff and how to screw or twist it on. So can you tell me what i need to look for. Ps. What u think of the optimist or what ever it’s called. I can’t member all this gun stuff. I started out just looking to buy a new sig xl 9 mm carry gun. Now for a week I’ve watched so many videos my amazon cart has 5000$ of gun stuff in it. Scopes mounts slings. All kinds of things I want. But for sure I want one of these and a either Daniel defense 300 or the banshee 300. Can u help me out on just this part. I want it to work on my 223 and future 300 Thanks.
If you have bad hearing already and didn't get any ringing, wouldn't that make you not the best candidate to gauge if you did or did not get ringing? 4:45
Bryan1483 May have miss spoke. I would get bad ringing shooting and hunting without hearing protection. But with a suppressor I can shoot all day with no issues.
damn you you've got quite the accessories. you think changing around accessories for different calibers with same can sacrifices much performance over dedicated cans?
Not really to be honest since it’s a welded non-serviceable baffle stack it’s very easy to change parts. The ability to go to almost anything you want and only have one suppressor makes things very nice on the range.
ericbc7 I have had a round go crazy on my 224 Valkyrie running they 5.56 end cap and it took it out but the suppressor is fine. I keep an organized case and pay close attention at the range.
What thread pitch are the threads on your threaded barrel for your Kimber .45 ACP? I've got a SIG 1911 TACOPS w/ threaded barrel & I expected it to be your typical left hand thread that's usually on most .45's. I noticed that yours is also a right handed thread pitch just like mine....so my main question is what size(thread pitch) did you order for your .45 piston/booster?
Do you think it's worth owning all the end caps? Just started the video so with it being 50 mins long you probably cover it but figured I'd ask. :) The Hybrid isn't my first suppressor but it is the first semi-modular one, the other two I own aren't customizable at all. Since I don't currently have anything with a threaded barrel larger than 9mm, my current plan was to put the 9mm cap on it and call it a day. I have a pretty large array I'd be mounting it to, multiple 5.56 AR's up through 9mm MPX and everything in between.
The end caps I will say for rifle are great. I mostly own all of them for uses with the 9mm on my 338 lapua and 350 legend and 357mag rifles. The anchor breaks I did not find any use for on any of my applications so I would say those are not something I would recommend.
@@Savage1776_ you can also buy flash hiders that have the adaptive threads on them that the can fits over depending on the system you have. That is how I use my hybrid 46
I had heard people having issues with them. I run frog lube grease the green tube. I coat the outside of the piston and the oring in them and have never had an issue. When I clean the pistons I use ezoxx gun oil just drop them in a small cup and let them sit over night. The next day the wipe clean. Then relube and I put the housings together and they are good to go when I need them.
@@powderburn4648 thanks, I hope to get mine out of the NFA jail soon but in the mean time I am slowly buying the accessories a little at a time looking for sales and the best deals.
Not sure why would u use a cover on a suppressor on the fist place that uses asr type mounting system? If ur unable to remove the can from the heat without cover u wont be able to remove it from the gun with the cover either. U still have to touch and deal with the hot mount it self. Besides that cover isn't doing nothing but making that can even hotter due to preventing heat dispersion at slower rate. In fact its probably doing more damage that good. Besides why would u need to remove a suppressor in a hurry exactly?
Well this may come as a surprise to you but the cover helps out greatly with heat mirage that can come off the suppressor and be horrible in front of you scopes. Plus if it’s a full auto rated suppressor I don’t think it’s going to hurt it much. Lastly the asr Mount is a reliable Mount that also makes it nice for switching between multiple hosts with not much effort. I’m just glad to see your comment makes tons of sense and you must me an expert in this stuff please feel free to stay or go. Im just here to have fun and inform people of some of the things I use more regularly then most.
@@powderburn4648 Your perfectly fine dipping your suppressor after 5-10 shots into bucket/bottle of water and all your heat mirage and other heat issues are gone.. After all you're at range not Fallujah and water buckets are widely available. Your right, its meant for full auto fire so water dip isn't gonna change a slight molecular intensity or compromise the material unless your getting your suppressor red hot. Besides those of us who live in Texas and drive cars in Texas heat and when it rains on them they still have functional car roofs with no holes in them.
Powder Burn Fantastic, looking forward to it. I’m currently researching my first can. I found your experience valuable and opinion well thought. I appreciate the time you’re putting into sharing your knowledge, cheers!
Rhys Harrison no problem. I don’t have a ton of stuff but I have enough to have fun. Going to be doing a bit of stuff on the bench fallowed by a trip to the range putting thing to the test. Should be fun. Hopefully going to stretch out my new 22lr setup out to a couple hundred yards.
Thanks for the video! The beauty in this is with this can you can suppress everything.
Best video ive seen on this can. Mine is still in jail.
Definitely my favorite can. Planning to get the new hybrid 46m next.
Thank you for making this video. This was the most informative 46 video I can find. Awesome content
I too have the Hybrid. Very thorough discussion on your part! Thanks for sharing!
Pat Realmanofgenius no problem I’ve just had tons of questions on mine. So I figured I’d do a full review. I finally upgraded my internet today so it’s a bit easier to do these longer videos.
@@powderburn4648 I understand the longer upload time. A 10 minute video averages 3 hours for me.
Pat Realmanofgenius yeah I shot this then tried to uploaded it and was like two hours in and it’s hadn’t got through 10% of the first stage. Switched to 100bit internet for $5 more a month and uploaded this in about 30min all done from my phone.
Pat RMG can u help me ? I want this to work on my 223 and my future 300 and 9mm banshee. What all do I need to order when I order this?
Great video brother , I just picked up my Hybrid yesterday , and want to Thank you for the info and the money I'm going to spend today.
Glad to here great thing the tax stamps are moving right know been hearing one or two just under 3 months.
@@powderburn4648 yeah it wasn't bad still took a while , great Can though .
Awesome video. Subbed and can't wait to get my hybrids
Great video and discussion. The Hybrid was the first can I bought because it was so versatile. I opted to run it with DeadAir KyMo mounting system. I bought it mainly for rifle use and as a secondary pistol can if need be because I had an Osprey 45k. Now that I have three Deadair rifle cans it runs on my AR45 and I love it. If you are only ever going to buy one can to cover a bunch of hosts this is a great choice
Rhett Butler exactly I think it’s a good first can for people to run. Also with the deadair kymo mount is really nice I had used the taper mounts like the asr in the passed and just really liked it.
So, just to be sure, the DeadAir KyMo adapter will work with the Hybrid 46? And you need to buy a DeadAir KyMo for each weapon you want to be able to swap it to? Excuse me, but I know nothing about this. $249.00 is a bit expensive to be just guessing and hoping. Thank you.
I bought the keymo and installed the brakes on my rifles only to get my can and it doesn’t thread into the hybrid. Did you have an issue threading yours? I measured them with calibers and it should fit but it won’t thread
@@michaelcarbis2286 email the guys at dead air. My keymo had the same issue. I think the threads were slightly off.
I have a SilencerCo Specwar in 30 cal., and a Saker K in 5.56. Been trying to get a Hybrid 46 for 5 months. My local shop just found a Hybrid 46 for me today! Bought it. Looking forward to getting it. Will work fine for my needs as a pistol suppressor. And work on some of my larger caliber rifles! The extra parts are pricey. But far less than more suppressors. Thanks for the great review! Now, if it would just work on my M82-A1! Ha-ha! I think I will get a dedicated 22LR and I can call it a day as far as suppressors go!
Outstanding video sir. Very informative and to the point. Helps me out greatly. Thanks brother 🙏 🇺🇲
I just purchased the hybrid yesterday. Now all I can do is wait. Great vid!
Paul Widomski thank you. Any info you need let me know and I’ll try to help you out. I own two and have a lot of pieces parts.
Paul widomski have you gotten it yet?
Okay , I went out and picked up the asr flashhider and the bravo asr mount and the lantac dragon asr for my 556 , dang I spent some but it's worth it , great Can !
bob02911 awesome I’ve been playing with mine all week.
@@powderburn4648 I'm going to the range tomorrow with some buddy's to send some lead down range . Should be fun .
bob02911 how was the trip. I’ve been having fun with mine and have some new videos coming hopefully by the end of the month.
@@powderburn4648 sorry for the late response , it was a good trip , I have been running this can a lot and having a lot of fun with it, a bunch of my friends have these in suppressor jail right now.
You sold me sir!! Gonna snag one of these as my first can.
Great video made the plunge today and ordered my can the wait begins
ben grosser that’s awesome you’ll love it. Let me know if you need any help picking out things to go with it.
Thanks for this video. I’ve been goi g back in forth on getting a hybrid for my second can. I have a yhm resonator and it works fine but like the divers of the hybrid.
mulekicker 1919 i can say that the versatility of it makes it so noise. It’s likes thinking about most of what I own and saying yep I can suppress that.
Good video. Still informing me years later. Wish you well sir
Considering both the Hybrid and the Ruger 450BM. I have Dead Air Sandman K & L, Griffin 30SD, SilencerCo Octane 45K, and Liberty Regulator currently.
The Hybrid is on the short list since it gives me a big bore rifle options and can be made to work with Dead Air Keymo and will work with the Octane mounts.
A Ruger American 450 Bush Master review would be cool. I have had several bolt guns over the years but my Main is a Tikka CTR 308, and I recently got a TC compass 300WM.
Sorry if it sent a dislike on my phone switched it to like.
No problem. I plan on doing a full review on my 450 bushmaster ruger American this spring. I have been fighting with crap internet for a few years. Finally got good internet again and will be doing a few more videos soon. Working on getting some editing software to make it easy. You can go watch my other videos with the 450 bushmaster in them. There’s one with the black butterfly 425gr buzzsaw subs.
Hell of a video, thanks! I'm buying this & getting an Octane 45 in a SiCo bogo deal.
Thanks great job helped me better understand my new silencer.
Very good explanation of the Hybrid
Thanks for sharing
Hi nice video I just got my hybrid 46 looking to run it on my 6.5 creedmore, ar15, 308, 9mm
Please let me know what accessories I should get. Thanks
Finally got mine home and shot it it is quieter than a paintball gun on a hipoint carbine in 45acp
i have one in jail.. quick question.. I plan to use her for 9mm, 350 legend and some 762 out of an ar47.. I should be good with just a 9mm front cap.. correct ? thanks
Correct all that can go through the 9mm end cap. The 763 May sound better out if a 30cal end cap but will be better out of the 9mm then the 46cal it comes with.
Well i just want to say thanks for the knowledge! I have the omega can from back when it was knew. Sure wish i could have the option of the hybrid to start with.
I have a question for you and maybe you have some more knowledge to give. I started with a kights armament usp 45 sepressor that i would like to use on other fixed rifles and pistals too.
Where can i get pistons and piston sleeves for the suppressor? All platforms would be for 45 pressurs and lower.
Thanks!
Silencerco sells a fixed barrel sleeve that goes over the piston in place of the spring so it won’t move.
Can I run this on 22lr in moderation without dirtying it up too much? Rabbits are invading the garden and unsuppressed I get one every couple days but suppressed I feel I could drop multiples
I want this to use on my 223 and going to get a 300 blackout soon and 9mm banshee. So what all parts do I need for them 3 rounds? I’m thinking I will only buy the end cap for the 223. Just use the cap that comes with it for the 9mm not sure if need the 300 end cap? But I do want it to shoot sub and super sonic rounds. I have no idea what ever I need to order when I place the order. As far as the Inside stuff and how to screw or twist it on.
So can you tell me what i need to look for.
Ps. What u think of the optimist or what ever it’s called. I can’t member all this gun stuff. I started out just looking to buy a new sig xl 9 mm carry gun. Now for a week I’ve watched so many videos my amazon cart has 5000$ of gun stuff in it. Scopes mounts slings. All kinds of things I want. But for sure I want one of these and a either Daniel defense 300 or the banshee 300. Can u help me out on just this part. I want it to work on my 223 and future 300
Thanks.
If you have bad hearing already and didn't get any ringing, wouldn't that make you not the best candidate to gauge if you did or did not get ringing? 4:45
Bryan1483 May have miss spoke. I would get bad ringing shooting and hunting without hearing protection. But with a suppressor I can shoot all day with no issues.
Powder Burn thank you for the clarification, great video thank you.
changing those end caps all the time have you eve got a baffle strike?
Where did you bought the suppressor cover please and thank you
Excellent Review...
damn you you've got quite the accessories. you think changing around accessories for different calibers with same can sacrifices much performance over dedicated cans?
Not really to be honest since it’s a welded non-serviceable baffle stack it’s very easy to change parts. The ability to go to almost anything you want and only have one suppressor makes things very nice on the range.
At some point I’m betting I will shoot the end cap of the one I just ordered 🤨
ericbc7 I have had a round go crazy on my 224 Valkyrie running they 5.56 end cap and it took it out but the suppressor is fine. I keep an organized case and pay close attention at the range.
What thread pitch are the threads on your threaded barrel for your Kimber .45 ACP? I've got a SIG 1911 TACOPS w/ threaded barrel & I expected it to be your typical left hand thread that's usually on most .45's. I noticed that yours is also a right handed thread pitch just like mine....so my main question is what size(thread pitch) did you order for your .45 piston/booster?
Greg Browning the threads for most Standered 1911s in 45acp is 0.578 x 28 tpi RH.
@@powderburn4648 I appreciate brother.
Do you think it's worth owning all the end caps? Just started the video so with it being 50 mins long you probably cover it but figured I'd ask. :) The Hybrid isn't my first suppressor but it is the first semi-modular one, the other two I own aren't customizable at all. Since I don't currently have anything with a threaded barrel larger than 9mm, my current plan was to put the 9mm cap on it and call it a day. I have a pretty large array I'd be mounting it to, multiple 5.56 AR's up through 9mm MPX and everything in between.
The end caps I will say for rifle are great. I mostly own all of them for uses with the 9mm on my 338 lapua and 350 legend and 357mag rifles. The anchor breaks I did not find any use for on any of my applications so I would say those are not something I would recommend.
Great video!
Jeff L thanks bud.
Nice Video! Just got mine last week. Question were do you buy the end caps on yours, I cannot find them anywhere.
Try Capitol Armory
Silencer Shop
How do you shoot .223 if it's threaded at 1/2 instead of 5/8‽
Thread adaptors
@@littlefinkle7757 Thought so...just checking...thanks....
@@Savage1776_ you can also buy flash hiders that have the adaptive threads on them that the can fits over depending on the system you have. That is how I use my hybrid 46
Have you had any issues with the O-ring drying out in the piston housing? If so how have you dealt with that
I had heard people having issues with them. I run frog lube grease the green tube. I coat the outside of the piston and the oring in them and have never had an issue. When I clean the pistons I use ezoxx gun oil just drop them in a small cup and let them sit over night. The next day the wipe clean. Then relube and I put the housings together and they are good to go when I need them.
Mine, I'm not really happy with because of the add on costs.
Nice video. Which wrap do you recommend?
Sherman Ragland for High temp and great setup riflesonly.com. Or cole-tac
Sherman Ragland no the body is 7.5” so I run a 7” gives you room on each end to change things as needed.
Awesome video
Where do you purchase the caps for other calibers?
Goldeneye 007 typically either MidwayUSA or capital armory.
@@powderburn4648 so are they regulated as "supressor parts" and require more paperwork or is more like a traditional purchase?
What do you think of the griffen 46 bushwaker compared to this? Its is user serviceable and lighter but more $
What length of suppressor cover is that?
I’m running a 7.5” but would recommend only running a 7”. If it slides forward at all it’s hanging off the end.
@@powderburn4648 thanks, I hope to get mine out of the NFA jail soon but in the mean time I am slowly buying the accessories a little at a time looking for sales and the best deals.
@@TheLanden11 find me on Instagram @chall350. I have some odds and ins I’m moving and dm me.
Not sure why would u use a cover on a suppressor on the fist place that uses asr type mounting system? If ur unable to remove the can from the heat without cover u wont be able to remove it from the gun with the cover either. U still have to touch and deal with the hot mount it self. Besides that cover isn't doing nothing but making that can even hotter due to preventing heat dispersion at slower rate. In fact its probably doing more damage that good. Besides why would u need to remove a suppressor in a hurry exactly?
Well this may come as a surprise to you but the cover helps out greatly with heat mirage that can come off the suppressor and be horrible in front of you scopes. Plus if it’s a full auto rated suppressor I don’t think it’s going to hurt it much. Lastly the asr Mount is a reliable Mount that also makes it nice for switching between multiple hosts with not much effort. I’m just glad to see your comment makes tons of sense and you must me an expert in this stuff please feel free to stay or go. Im just here to have fun and inform people of some of the things I use more regularly then most.
@@powderburn4648 Your perfectly fine dipping your suppressor after 5-10 shots into bucket/bottle of water and all your heat mirage and other heat issues are gone.. After all you're at range not Fallujah and water buckets are widely available. Your right, its meant for full auto fire so water dip isn't gonna change a slight molecular intensity or compromise the material unless your getting your suppressor red hot. Besides those of us who live in Texas and drive cars in Texas heat and when it rains on them they still have functional car roofs with no holes in them.
Great vid, thank you!
Rhys Harrison thank you. Going to start doing so new videos here soon.
Powder Burn Fantastic, looking forward to it. I’m currently researching my first can. I found your experience valuable and opinion well thought. I appreciate the time you’re putting into sharing your knowledge, cheers!
Rhys Harrison no problem. I don’t have a ton of stuff but I have enough to have fun. Going to be doing a bit of stuff on the bench fallowed by a trip to the range putting thing to the test. Should be fun. Hopefully going to stretch out my new 22lr setup out to a couple hundred yards.
What is the spring for?
yandri arce it’s for the pistol assembly for running it on pistols.
Nielsen device allows pistol use by letting it break free and start to cycle on recoil due to all the weight of any can on that short of a barrel.
Anyone who owns this is it worth buying?
LeetnessGaming not sure what your question is.
That’s just a mussels break and a tube that’s why it is still loud
A real simple review... 50:36 A real in depth review.