How to build a Skate Ramp / Quarter Half Pipe

Plans available on my Patreon page→ / adamdiy
Featured tools: Kobalt Tool Combo Kit→ low.es/2DcBeak
Kobalt Jigsaw→ low.es/2KB1hy2
All the materials are listed below. Be sure to click the link and print out the plans with measurements. The ramp you see me build in this video is 4ft wide. If you have the space available, building an 8ft wide quarterpipe is worth considering as well as a second ramp to turn it into a halfpipe.
If you end up building your own, send some pictures and let me know how it went. If you want to paint, stain or seal it; treat the wood with the same materials as you would use on a deck.
Transition & Deck Ply→ (1) 1/2" Sheathing
Sublayer Ply→ (1) 3/8" Sheathing
Surface Ply→ (1) 1/4" Sanded
2x4's→ (6) Straight with no large knots
PVC Coping → (4ft) 1-1/2" Conduit
Construction Adhesive (or use screws)→ (1) Loctite Premium Construction Adhesive
Surface & Deck Ply Screws→ (60) 1-1/2"
2x4 to 2x4 Screws→ (21) 3-1/2" exterior
1/2" ply to 2x4 screws→ (28) 2-1/2"
______________________________
/ adamdiy.me
/ adamdiy
Email / Mail:
/ adamdiy
Disclaimer: Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end-user/viewer and not AdamDIY and or Adam Hill. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source. This video is only for entertainment purposes.
#LowesPartner #Spon #skateramp #ramp