How to make the best Hydroponic Super Cloner
HTML-код
- Опубликовано: 30 сен 2024
- This is a step by step instruction video showing How to Make the best diy hydroponics Super Cloner for Plant Cuttings.
Water & nutrients are sprayed onto the stems of the cuttings.
The mix of water & air is ideal for getting roots to grow.
Music is from the You Tube Creator Studio.
Edited with Filmora Wondershare video editing software
(full license)
I have a question my man, in what phase do I cut the steems, can I cut them when they are flowering?
Ideally, you will cut them in veg, a week or two before the plant go's into flowering. but Yes you Can also take cuttings during flower. They may take a little longer to root & then they have to revert back to an 18 - 6 veg cycle.
It takes a little longer but yes, I'm about to do that myself.
To get roots I make a half strength Flowering mix &
This is a plants Best friend. I add some N.P.K.RAW, Kelp to the mix.
When you add that, it stimulates root growth at All stages of plant growth.
When you add that to a foler spray, it will temporarily stunt top growth & promote side branching, making huge bushes Very easy to grow.
@@GanjajuanaMan omg you answered my question, thank you my guy, I'll do what you said then!
GanjajuanaMan NPK RAW KELP is a product?
Yes, in Canada it can be bought/ordered from "Indoor Farmer" & it can be found on Amazon but on Amazon sometimes they try to charge too much for it. An 8 ounce bag costs around $30-$40 Canadian.
I leave it on 24-7
Thanks for watching.
Bud, the simplicity of this design is brilliant. $300-400 for a closer in most hydro shops. You get a clear tote type setup and fuck does it look slick, but what is the end game? Cloning great plants..... your design can be picked up and moved with ease, you can build 10 of these bucket cloners for the price of a pro made cloner. The spray heads can be purchased that spray 90 and 180 degrees to concentrate the water spray direction. Again ......great video .....love it
Thank you for your comment !
I don't mind supporting good products, but the prices they are charging for simple things is just ridicules. Because you still have to put those expensive ones together, so they are No easier, just cost more. WTF. Yesterday I searched "hydroponics" on Amazon.ca & saw packages of sprayers. 150 in a pack that had 360, 180 & 90 degree sprayers in one pack for under $20
Recently I have seen people selling something called
auto-pots, & again they are ripping people off at over $300
when you can make a better system for a fraction of the price. I don't like to be ripped off & I don't like to see other people get ripped off. That might be my next video, I'll give it some thought.
Thanks for watching.
This video is amazing. So simple. So precise. So perfect. That throw to slow motion was hilarious. Solid video dude. Thanks for the laugh and the wicked info.
I believe an airpump wit stones n net pots would be better. Those submerged pumps get the water to hot and those dang sprayers clog to easy. Set your airpump in the coolest spot in the room or in a different room with longer lines. To keep water temp down.
Oh yeah and with net pots wit hydroton the heat that does build up in the bucket can escap out the top. Again keeping the temp down.
Your suggestion about using net cups would allow the rooted plants to be lifted out by the net cups and immediately set into a separate hydroponic tank, without a lot of fussing about the roots or stem. Neat idea.
what strength pump do you use?
Besides that this is the video I've been looking to checkout so I can get my clones right, sometimes it sounds like you are rapping over that song and it's f funny man lmaooooooo
Hahaha that's toooo funny 😂😂
But I added the music After everything else so, I wasn't trying to rap lol.
I have a sense of humour so I'll leave the video alone.
But that's funny !!
Thanks for watching 💨💨✌
@@GanjajuanaMan yoo man keep the videos like that it is dope even if unintended, being true is the shit, bleessss!!
Made 1 out of a fish pump and a hose with holes . It sprayed around the inside to the top of the lid with foam inserts. It took 3 days to form roots and 10 days to fully get roots to tranplant. It works really good and ill be doing it again next cloning.
The issues I have with this is that the little sprayers gets clogged up, every other day etc. l had my DIY cloners buckets etc out in the garage but in the summertime especially living in south Florida, the water inside the bucket will heat up. If I had a garage with ac running in there, it would had solved the whole problem. Once the water temperature hits 80 degrees it just kills the roots. You need to keep the water temperature around 70 to 75 degrees, give and take some. So I've started making cloners out of ice coolers so the water would stay cooler inside. But the temperature started climbing up through the day. you can always throw bottles of frozen water in the cooler which will bring the temperature down temporally. But it'll go up slowly again. So this year I converted the aeroponics into a hydroponics deep water culture cloner. Using a air pump and air stones to bring oxygen into the water. This way the temperature stays stable throughout the day around 74 degrees. Mostly because there's much more water in it about 10 gallons more compared to having only a gallon of water in it with the aeroponics system. So this summer It's all about deep water cloning.
I haven't decided yet to add any nutrients in it yet. But I just ordered a couple of aquarium sponge filters to keep the water clean.
get a dewey mister....air pump outside of the bucket, no heat issues
This would be great if you did not have the crappy loud repeating noise drowning you out. How about no background sound
Hey Ganja, this is genius. Mush better than 95% than other videos.
I made something just like this but had to fasten the tubing to the side of the pot with zip ties. Works a treat and is very easy to make.
The video could do without that God awful music.
This is an aeroponic cloner, not a hydroponic. The stems are suspended in air, and you spray water on them. In a hydroponic cloner, the stems would stay in water, and have air bubble around them.
i was thinking the same
You are correct!
Which works better for weed?
@@josephmcguiness6452 Ive had sucess with an aeroponic but I think they would work the same
@@timothyotten8744 great. Thanks for all the knowledge
Tôi rất thích , bạn thật tuyệt tôi sẽ làm giống như bạn
Cool! I invented a similar device, but more simplified. I have one using a 3 gallon bucket and another 1 gallon bucket, using a large round airstone glued to the bottom of the smaller bucket, and one hydro spout glued in the larger bucket. I too made 2 inch holes but I dropped in net pots which I can use whatever medium I want or none at all and they still root vigorously! I also have 2 inch plastic covers with hole in the middle and a slit on the side ( to place or remove from plant stem) to cover the hole so no light gets in. I also use a clear plastic bowl from the Dollar store to cover the 3 gal, and a smaller one from a cake container for the 1 gallon to use as domes. Of course I use a cloning solution and low fluorescent light and I have 95 - 100% success rate. Cheers Brother!
show me im very interested
so you have 1 gal bucket using a air stone and a 3 gal using hydro spout ?
good video but can do better without the background soundtrack
Good video, but the background music was far too loud
Just subbed ya brother, great DIY info, truly appreciated. I have been using the CO2 generator idea for two seasons now and the results are amazing. Gonna go build a cloner now and experiment thanks to you. Love using ingenuity instead of store bought any chance I can. Thanks for your contributions.
Thanks a lot !
Good to hear. Your gonna like that cloner too, it just doesn't fail.
Thanks for watching.
Hey my friend
Like your vids, super affordable and very practical ideas. Hope to see more!
Thanks for watching.
Good job man, do you put something in the water for the nutrients?
I add a bloom mix with a bit of Kelp.
Thanks for watching.
Made this last night! Came out perfect and cant wait to use it!
I'm thinking the pressure in the misters are there are too low there too many otherwise time well spent
inspirational...love the life of new plants....Hidro or maybe airo...great learning with you...
Thanks for watching 💨💨✌
Are you putting anything in the water for the rooting?
My major confusion about placing such instruction in gear is to be sure it's gonna work for a real hardwood cuttings. To propagate green cuttings I don't even need such bucket, but what about cherry cuttings, pear, apple, lemon, orange, plum ???? Hardwood (trees) propagation is the real point to invest in such machine
ive seen people use it for hardwood stuff
Yeah, it works on trees
Genius...
I never expected a weed based how to video to be narrated by Garfield. but it totally works
lol.
What size of pump are you using to get the water flow you have?
it was a 320 gph (gallon per hour) pump.
i have a clear sludge building up in mine just after a week any advice??
try 5 ml of hydrogen peroxide per gallon of water
REALLY WORKS SWEAR
Hey man sorry for bringing up an old thread but it shows this knowledge is just as useful as time passes so thank you for this 🤙🏽
But I have a question , could I upcycle an old water feed ring at the top hose ?
Nk air pump or fan???why not if it's so cheap to build
Good info 👍 (sound sucks! SMH) Thanks
lol. yeah people keep complaining about the music, so none of my new videos have music. Thanks for watching.
Works great
Pump will heat the water here a the tropics at least. would you recommend a timer and how often spray?
Music is unnecessary but thank you for tips!
Great bucket! But I think it will be better if you add an air stone. And also use a fog generator for aquariums in place of the round tube.
Ingenious idea my friend and thanks for sharing this with us all much appreciation 👍
Your video should be the template for all DYI RUclips demos! Perfect nothing but the facts…perfect showing all parts and easily followed process.🎉
Great video mate. That music though……. 👎
Hi bro, I still got issue with water dripping on the edge of my tube even though I already drilled the holes
Do you have any advice on this?
So I have a question about the clones. Do you put a dome over them or do you just put the bucket under a light.
Can seeds germinate in this system? If so, where do you put the seeds? How to do it?
Super badass setup. Insta subscribed, im going to build one of these in a smaller format. like your content dude, check out my grow some time
What’s your timer like for this ? Last round I did 24/7 but my pump was real weak I’m thinking that way the issue it was just sprinkling out not misting really- I’ve heard 15min on/off but that seems excessive maybe I’m wrong though
How do you prevent stagnant anaerobic conditions in the bucket?
hydrogen peroxide
@@GanjajuanaMan just regular hydrogen peroxide from grocery store? How much do you use? Thanks
@@TheDailyPracticeBlog I use concentrated hydrogen peroxide from the grow store it is 30%
Regular stuff from the store is 3%
I use 5 to 10 ml per gallon of water to keep it sterile. & change water once a week.
Nice!! We're you get the plugs
Hey fam , is there a link you can send for that tubing piece ?
Where I can buy those orange pieces?
Question, those are standard 2 inch neoprene inserts that you're using, yes? So did you need to cut the holes WITH a 2 inch bit on the door knob hole maker or was it necessary to use a 1&3/4" bit in order to get them to fit properly? I'm hoping to build this exact cloner, you've inspired me! Already got the order in for everything but the drill bit. Can't afford a full hole making set RN so I'm forced to order just the one so gotta get it right. THANKS!!!
Aaaaaaaand my neoprenes fell RIGHT THROUGH with a 50mm/2" bit. Dang. I just noticed yours appear to flair out a bit towards the top. Definitely would help with mine which are flush flat on the sides lol. Luckily I tested it out with the first hole so I just made my own insert from foam and used that hole for the plug.
Things a hammer wat mix you run in it
great vid, but you gotta relevel your audio my dude
hello, super nice build, i just have a doubt, about the pump work, how many time, all the time or every 10 5 or 1 minutes. as it is aeroponic its very fragile.
Run pump 24\7
what nutrients do you put in the water and what kind of cloning gel do you use? Thanks for the video!
Damn dude hell yeah that’s badass
Do you run the water 24/7?
Do you have a problem with water getting to hot?
Hi there do create a humidity environment to for it? And how many light hours are you running?
you donn't need an airstone, because there is enough water spraying, for proper oxygen exchange. I think I'm going with your model. Thanks! It's for veggies!!
this does Not have an air stone. it only has a water pump.
Thanks for watching.
The theme music was a bit much
What drill do I need to buy to make a hole?
Great invention, Thank you
Are you using a dome on top of that? I’m definitely making this!!
No, nothing on top.
how often do you change the water / solution? and does water temp matter?
Hey my friend
I usually have roots in 10 days & don't use this constantly, so I clean it out as soon as I have roots & take the clones out.
the water temp is is usually in the low 70's.
Does adding root hormone powder help or hurt if you add to this method? I was curious if it roots faster
Did your water heat up with the pump on 24/7
I just like the fact that you built it it's awesome too !
Sweet!!!! Nice simple design and def looks to me like it works GREAT!!!
😎😎✌🇨🇦
Link for the item red??
Can you full time grow plants with this setup or is this only for Cloning? So would it work for a larger plant in a single net pot? @GanjajuanaMan'
do you leave it running 24h or do you have a timer?
I would also like to know this ifno
2:23 what diameter of the nozzle hole saw are you using?
I just listened to the dramatic music
My dude 👍🏼👏👏
Glad I found your video
What size drill bit u use
very nice simple design good instructions no wonder your video is resurfacing happy growing from breezygardens I'm going to send a few friends your way
So nice of you. 💨💨✌
How often to add nutrition to water, do need the water
Cool 😎
Speak up.
Intresting build. I just use a cloning tray with a clear dome and heating mat. I have two that hold 60 cells each so I can pump out 120 clones at a time. Never have had an issues with it all these years.
Just set environment for clones and no worries? No heating pad to raise humidity. As I type in think I answered my own question but still curious lol
Hey man so do you use any kind of cloning gel or any nutritional supplement to the water?
I mix a half strength flowering solution & add
N.P.K. RAW Kelp powder.
Thanks for watching.
GanjajuanaMan Yea, this answers question i asked above. Is kelp essential?
Kelp falls into the "Beneficial" category not the "Essential" category of nutrients. There are many products on the market for rooting in hydro cloners, most cost a lot. I bought an 8 ounce bag of N.P.K. RAW Kelp powder 4 years ago & still have lots left. A little go's a long way with that stuff. A lot of people spend lots of money on Giberilic acid for rooting, but it is an extract of Kelp, so save money & buy kelp & get the Giberilic acid + all the other beneficial nutrients that are in Kelp.
@@GanjajuanaMan you are dropping a lot of really great free knowledge here that otherwise may not be learned for years by most growers. Thank you for sharing your methods and please know that it is very much appreciated.
where did you get foam inserts ?
What size are the foam Inserts your using in this video
I like this
Is that 2" hole?
What do you add to water ??
I use kelp powder, the brand I use is
"NPK RAW Kelp"
Thanks for watching.
Great idea and well thought out engineering where would one get spray tips..?
I found these on Amazon but they don't sell them anymore. I think they should be at a lot of Hydroponic stores. After all, they sell the expensive cloners so they should sell parts for them. (I'm guessing)
You might have to do a bit of an internet search, but I'm confident that you will find some somewhere, good luck.
Thanks for watching.
Good call I'll find something .....
ingenious though man stoked to try her out!!! Thanks for sharing
They sell them on ebay
I built one of these...my cuttings have been in the bucket for over a week and i don't have any roots at all. I have cloneX in the water, and root gel on the ends of the cuttings. water is running 24/7 any suggestions or help would be great!
I add N.P.K. Kelp powder into a flowering mixture, I take clones 6" tall & shred the stem a little bit at the end & I scrape the stem a little so that roots can sprout from more parts of the stem then just the end. for rooting I have a 24 watt T5 grow light on 24/7 under a dome, I open the dome once every day for fresh air.
9 out of 10 times I get roots in under 10 days.
But N.P.K. Kelp powder is your plants best friend.
Thanks for watching.
@@GanjajuanaMan Any recommendations for the kelp powder and flowering mixtures, brands etc...
Go on Amazon & type
N.P.K. Raw Kelp powder.
@@GanjajuanaMan Thank you sir👍
I noticed that roots grow faster in dark environment. I painted my deep water cloner black and make sure theres no light that makes it inside the machine. First time i did this it worked and the second time i did it just got all green with algae.
only suggestion would be to use a cheap cake lid (think walmart round cake) to put on top to keep humidity in.
Absolutely no need . Everyone over thinks everything.
nice video thanks for the upload.
Thanks for watching.
Genius!!!!!!!! ⭐️⭐️⭐️⭐️⭐️
I need to make 30,000 Hazelnut clones. Do you think its possbile to do it with this methode?
Your gonna need a lot of buckets lol.
Probably better off doing rockwool cubes under a humidity dome for high volumes of clones. The aero system in this vid is probably better for root development and early growth performance vs a rockwool cube, but may not be cost effective for anybody doing more than a small room of 6-12 plants.
Occasionally online resalers (OfferUp, craigslist, etc) may be selling food grade buckets for very cheap ($20 retail vs. $5 resale), which does bring down one of the major portions of the cost of this design. Something to think about.
What did you use for the foam insert? Where did you get it?
I used the proper foam inserts, bought them at a local grow store.
I have seen them on Amazon also.
Thanks for watching.
If you are still looking if you just buy a pool noodle and cut it up they work great.
That's a great idea !!!
thanks for sharing.
H r u my friend
Can you clone roses with this method?
I have never tried to clone a rose & don't know anything about growing them, sorry I can't help you with that.
Thanks for watching.
Yes
How often is it turned on ? or is it on 24/7 ?
I usually leave it on 24/7 but you can put it on a timer
with it on 15 mins. off 15 mins.
Thanks for watching.
hey bro, does a 1800L/h works too?
This 320gph pump is approx 1200lph.
Where do you guys get the foam inserts? Freaking loving this setup😍🤙
Amazon
I think I'm going to try getting one of those pool noodles from the $1 store and cutting into slices to use for this.
Yesss!!!🔥🔥💯💯