FASTEST WAY TO ROOT CUTTINGS || DIY HYDROPONIC CLONER FOR UNDER $30
HTML-код
- Опубликовано: 20 окт 2023
- This aeroponic system will root cuttings in less than a week, by using a science based approach to cloning your plants. You can assemble this system with just a drill and a few basic parts. Total cost for this system is less than $30 and some of the materials needed can be obtained for free!
In addition to cuttings you can speed up the growth by starting your vegetables early and get them off to a quick start for the fastest harvest ever. Many refer to this system as aeroponic or hydroponic, either way it speed up root production by 100x. After trying this method you'll never clone in soil again.
▶Check This Out:
Micro Hydroponic System Unveiled: • Micro Hydroponic Syste...
Easiest Way To Grow Hydroponics: • Easiest Way To Grow Hy...
Build Your Own Hydroponic Grow Tower: • Build Your Own Hydropo...
How To Build A Solar Powered Self Watering 5 Gallon Container: • How To Build A Solar P...
▶Subscribe To My RUclips Channel. Thanks For Your Support! / @zengardenoasis.
▶Products| Use:
VIVOSUN 800GPH Submersible Pump(3000L/H, 24W): amzn.to/3FtkfAw
US 90 PCS Micro Sprayer Hydroponic Misters Cloners: amzn.to/3Fsya9H
Hanson 80220 Drill and Tap Packs: amzn.to/3S4bpk5
Neoprene Clone Collars: amzn.to/45Lz6AO
#aeroponiccloning #hydroponiccloning #cloningplantsfromcuttings
Great build. I would suggest two improvements. Replace that bucket or paint it black, this will cut down on algae growth inside the bucket. Next replace that pump with an inline pump to remove heat from the reservoir, pythium is a real problem, cooler temps helps. Additionally add Hydroguard into the reservoir as another defense against pythium. For another upgrade think about a DIY venturi injection system. Examples are all over you tube. A cycle timers is another, research says shorter run times off 30 seconds on and 3 minutes off creates roots faster "supposedly". Please except my two cents as not criticism but the hope of reduce the learning curve for others who may try this method of cloning. I made my own cloner a while back and had a great time doing it. I am a master gardener with decades experience in hydroponics, it can become an obsession. Happy gardening.
Great tips. Happy gardening
I put this together using your Amazon links. The conditions in the bucket seem stagnant and I’ve had two die from the root rot issue. The pump in the bucket is really causing some hot conditions in the bucket as well. How is your setup doing?
I can’t wait to try it! Thank you for sharing and happy gardening brother!❤
Great build! I've done the same in a rectangular tote with that same Vivosun 800gph pump and the red 360-degree sprayers. Wanted to comment that instead of giving up a whole hole (you could use an outer hole, btw, for the cord to be less in the way of the plants), I notch my buckets for tower systems down through the rim just a short way, and thin enough of a groove to just squeeze the power cord into. A drill bit run on its side works well for that. A dab of silicone on the inside, snap the lid back on, and you've got a pretty clean-looking power feed. Oh, and putting the pump inside a mesh bag (like a paint strainer bag) that's zip-tied shut around the pipe and power cord will filter out any bad stuff that will try to clog the nozzles.
Once again though, great build! And thanks for showing the tests of the irrigation sprinklers.
Happy gardening
PERFECT 🤩! I’ll be trying this very soon. Thank you for sharing
Happy gardening
Gracias por compartir con todos este precioso método de agricultura un saludo y mil gracias
Your very welcome.
Next time when you drill into pipe. Use v blocks. It will help secure pipe. You need to clamp down v blocks to isolate movement during drilling also to show operation, remove lid. Put clear plastic on top, then show audience the spray.
Appreciate it
Thanks for the video!
What is the size of the pump output female connection? 1/5’’ as well?
I mean the adapter you connected
I think I put the pump link in description
Love the video! Without a plant in the center, would a single red 360-degree spray be good enough for the entire bucket?
I think so!
Great tutorial. Is there certain types of plants this kind of cloner is good for and ones that are not?
Yes, it works on Jazz Cabbage too😜
Works well with any plants you would put clippings in water to propagate.
what was the tap die number please
Hi, good day. I am new to your channel, and I wanted to know if the pump stays on all the time?
On a timer I think I mentioned it in the vid.
Where did you find that 5 way 1/2" fitting they don't have them at the plumbing supply store or ace hardware or anywhere around here!⚠️
Drip depot online
Search: 5 way 1/2" pvc cross. They are everywhere, including Home Depot and Lowes.
Do you have a part number. I have looked for those everywhere. Sadly I bought a number off of Amazon, and they are furniture sized, evidently... way to big.
What size is the half inch pvc sections?
1/2”
I'm sorry I mean length wise
@donpacaso looks like 8 - 10 inches
I used a 3" brass threaded pipe for the rotating sprinkler head.
I know it’s only plastic but you shouldn’t use a drill to run a tap
Thanks for sharing! You've inspired me to try this! I'm a new subscriber with a "black thumb"! I've never had success with plants but I'm going to try this. Do I really need a high-volume pump to operate the misters? I plan on trying your last version with the PVC pipe. I was hoping that a pump between 100 gals and 400 gals an hour would suffice as I'm thinking of making several, each with its own pump. I appreciate your time and effort and how you go into detail to explain the process and make it easy! 😄🛶
A small pump will work fine. I put a link in the description a while back. The pump was fairly inexpensive. Cheers.