i guess Im randomly asking but does any of you know of a way to log back into an instagram account..? I was stupid lost the account password. I would love any help you can give me.
@Leonardo Caden i really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm. Takes a while so I will get back to you later when my account password hopefully is recovered.
Bit of advise put your crossover and air filter on lose to make sure everything is all inline and in it's right place . When I did mine I got a bit twist in the new pipe and it put my system service light on . Just a little tip
Nice vid with every detail explained really well. Worth mentioning as just a little bit of extra info.... if you're goin to all the trouble of taking the scuttle and hoses off, its maybe worth checking your manifold bolts while your have access. Especially if theres a squeal/shrieking sound on cold start or getting on boost. Pretty much the engine equivalent of putting a blade of grass betweem your fingers and blowing through them (manifold gasket). Theres 4 10mm bolts for the heat shield then the manifold bolts are 13mm. Drivers side bolts are way easier to access with that hose off. Keep up the vids mate. Loving the before and afters right next to each other. 👍👍
Really appreciate this comment mate, and thanks a lot for the info!! I’ll take that into account mate. I’m glad you enjoyed this mate! (Your user name is the name of my favourite DJ) 🤣🤣 👌🏼👌🏼👌🏼
that was such a brilliant video Bailey. I was rivetted, even though I am totally bored by cars!! So, huge achievement from you. Lovely mellow music as background. Also I was impressed by your control with the swear words. I would have had loads of retakes Peace to you too. N.XX
Hahaha thank you very much, I’m glad you enjoyed it. And happy you didn’t find it boring. It’s quite hard to find good background music, as I can only chose non copyrighted music, but I did like this one. Hahaha thank you 🤣🤬 lots of love xxx
Good mod, got exactly the same....just replace the rest of your boost hoses now which will help with breathing. Is your proram filter rubbing on your slam panel? Mine was, have added a cable tie to the battery cable to pull it away slightly and stop it getting damaged.
Awesome video and well explained , thank you . i will be doing mine as well.....just curios tho , whats the diameter of both ends of the cross over pipe ?
If you go through my previous videos mate you’ll see me fitting them :) I’ve put the product link in the videos description! It’s called the dress up kit
I’d say it will make a difference mate, nothing major, as pretty much all the intake sound comes back through the open cone, obviously the stock box is enclosed so most of the noise will be lost due to this.
Do you mean when fixing the pipe to the turbo? I suggest trying to get both hands mate, one hand holding the jubilee clips whilst tightening it with the other to keep it in the correct place until it’s fixed properly.
Great video and interesting. Deffo do mine now. Keep the videos coming as very informative.
I’m glad this helped you! I will do mate
Installed my crossover hose today and now going to invest in the air. filter.
i guess Im randomly asking but does any of you know of a way to log back into an instagram account..?
I was stupid lost the account password. I would love any help you can give me.
@Samuel Connor Instablaster ;)
@Leonardo Caden i really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm.
Takes a while so I will get back to you later when my account password hopefully is recovered.
Got mine to do, but a tip I'd say is bag and elastic band to pipe while stripping. Last thing you want is to drop a screw or clip down the pipe.
Yes mate that’s very true, I told my self I’d do it but I clearly got distracted 🤣
Bit of advise put your crossover and air filter on lose to make sure everything is all inline and in it's right place . When I did mine I got a bit twist in the new pipe and it put my system service light on . Just a little tip
Nice one mate, mine was all okay mate no lights or anything 👍🏼
Nice vid with every detail explained really well. Worth mentioning as just a little bit of extra info.... if you're goin to all the trouble of taking the scuttle and hoses off, its maybe worth checking your manifold bolts while your have access. Especially if theres a squeal/shrieking sound on cold start or getting on boost. Pretty much the engine equivalent of putting a blade of grass betweem your fingers and blowing through them (manifold gasket). Theres 4 10mm bolts for the heat shield then the manifold bolts are 13mm. Drivers side bolts are way easier to access with that hose off. Keep up the vids mate. Loving the before and afters right next to each other. 👍👍
Really appreciate this comment mate, and thanks a lot for the info!! I’ll take that into account mate. I’m glad you enjoyed this mate! (Your user name is the name of my favourite DJ) 🤣🤣 👌🏼👌🏼👌🏼
hey Andy , i have that squeal only when the car is cold and once heated up the noise is gone , i need to get that sorted out tho. thanks AndyC.
Makes the world of difference mate. Sound awesome 👌
Nice tutorial, spot on ,il do mine on the weekend after watching this ,cheers
Glad this helped mate
that was such a brilliant video Bailey. I was rivetted, even though I am totally bored by cars!! So, huge achievement from you. Lovely mellow music as background. Also I was impressed by your control with the swear words. I would have had loads of retakes Peace to you too. N.XX
Hahaha thank you very much, I’m glad you enjoyed it. And happy you didn’t find it boring. It’s quite hard to find good background music, as I can only chose non copyrighted music, but I did like this one. Hahaha thank you 🤣🤬 lots of love xxx
Any idea if can source the actual cross over pipe upgrade. Maybe full silicone or made of another material other than plastic to avoid heat soak ?
Nice i need that for mine just had all 3inch pipes in on mine
Good mod, got exactly the same....just replace the rest of your boost hoses now which will help with breathing.
Is your proram filter rubbing on your slam panel? Mine was, have added a cable tie to the battery cable to pull it away slightly and stop it getting damaged.
Nice mod isn’t it mate! Yes mate I have plans to 👌🏼👌🏼 and my filter is touching the metal at the front of the engine bay slightly, but nothing bad!
What size jubilee clips did you use??
Awesome video and well explained , thank you . i will be doing mine as well.....just curios tho , whats the diameter of both ends of the cross over pipe ?
Thanks very much mate, really appreciate it! I couldn’t tell you off the top of my head mate!
Hahahaha...okkkkk
another great video mate
Thank you very much !
Is that a standard crossover? I have a turbo to crossover pipe on order but only a standard crossover atm.
Yes mate mine is standard 👍🏼
Where did you get the red bolts that go round the engine bay?
If you go through my previous videos mate you’ll see me fitting them :) I’ve put the product link in the videos description! It’s called the dress up kit
Hey mate, do you know anyone that’s willing to do a 4wd conversion?
What if usinf stock airbox and Stock filter? more noise?
I expect you will notice a difference mate, however most of the induction noise comes out of the open filters
Anyone know if it would make much difference to the sound by just doing this, with the factory airbox and intake system?
I’d say it will make a difference mate, nothing major, as pretty much all the intake sound comes back through the open cone, obviously the stock box is enclosed so most of the noise will be lost due to this.
@@AutoBay cool, thanks for the reply! May give it a try and see!
Any tips on keeping the jubilee clip in place? Keeps moving up and I cant keep it down in place
Do you mean when fixing the pipe to the turbo? I suggest trying to get both hands mate, one hand holding the jubilee clips whilst tightening it with the other to keep it in the correct place until it’s fixed properly.
@@AutoBay yeah mate. The problem I was having is I was using the standard clips as there was no option to buy any and the standard one is too small
Sometimes I wonder why the hell can't manufacturers release their cars from factory with fitted goods like these
Hahahaha mate I think the same. But I guess it would be no fun modding your car else!!
Good video 👍👍
Appreciate it matey!
Found you lol good little video
Hahahah I’m glad mate! Nice one, appreciate it mate
Needed to take drivers side wheel and arch liner to get at that pesky rounded off jubilee clip on the turbo 🤣 you got away easy 😅😏
Off camera I was swearing like mad mate 🤣 editing makes it look quick and easy!! 😬🙈
@@AutoBay group A kit fitting later today , wish us luck 🤣🤣🤣