WE WRECK OUR JEEP WRANGLER AND ULTRA4 CAR IN THE SAME WEEKEND!
HTML-код
- Опубликовано: 26 авг 2024
- LITE BRITE NATION
↠ E3OffRoad - e3offroad.com
↠ Merch - www.litebritest...
↠ Facebook - bit.ly/2HatSru
↠ Instagram - / litebritestudios
We wreck both our hemi-swapped Jeep Wrangler AND our Ultra4 bomber car in the same weekend! But have no fear, because our frame chop is finally here!
Hope you all enjoy the video!
And for those interested in the equipment used in the shop -
Multimatic 220:
www.millerweld...
Spectrum 625:
www.millerweld...
Face shield, clear anti fog:
www.millerweld...
When Kevin’s talent runs out, Chris’s talent begins! 😁🤙
Well said. And remember. Rubbing is racing 🏁
With Kevin around, Chris won't run out of work to do. 😄
Again, Chris and Beck killing it !!!! Freaking love these two! :) They should open their own channel Lite Brite Garage or something! Like a lot of people do for their 2nd channel filed with " Other stuff " Bloopers or jobs with a much more detailed approach on the jobs they do or just bits of this and that. And keep the main stuff for the main channel. I would definitely watch both channels anyway and im sure i'm not the only one!
@@John_B_Fab I think keeping them together would benefit the channel as a whole and do better then trying to split it up. The ppl on this channel will watch all the content that's put on here because each person on here are so likeable and now one channel has it all, the good, the bad, the wheeling, and the repairs.. which is all the life of being into wheeling/racing, and what not. Im sure they could run 2 channels but I live it all being on the one. Just my personal preference tho.
@@preston_highwaycrawlers My answer to this is simple. From an editiing perspective you can't put everyting in one 15-25min video. Its those little pieces and bits that you put in the other channel for those who likes to watch shop stuff. And of course, this would also reach a different type of audience Generating a new level of RUclips revenues + new merch etc etc. Simple as 1+1=1 lol
Chris was such a great addition to this channel. I hope that you have a long relationship together and that everyone involved benefits mutually. I look forward to his content as much as new off-roading with the step child content.
He’s awesome, that’s for sure.
@@LiteBrite Yall are too!
I agree
How long have they all been dating?
I appreciate you guys showing the good AND the bad. Helps us “normal” people not feel alone! You guys are awesome and doing great!!
No one’s perfect, at least definitely not us! 😅😅
All you got to do is get a decent looking girl and have her pose in provocative ways in the thumbnail most the time you will get views. Lmao
I really enjoy when Chris walks us through the fabrication work.
#1 SOOO glad no one was hurt. #2 Super impressed with everyone's grace and comradery in those unfortunate scenarios. Glad you guys were all able to come off the trails safe and sound. Rigs can be fixed. At the end of the day, its just stuff. The people we surround ourselves with, and the way we come together and support one another are the most important things.
We love being around people with positive attitudes and can take things in stride. 😊
Well said
I’m loving the Chris/Beca repair/fabrication content.
Really love Brit and Kev, but at totally digging the days in the shop with Chris.
Chris and Beck are the BEST addition to the channel!! He is SO GIFTED it's crazy and Beck adds so much also! Wish we lived closer.
As I watch your videos I appreciate Chris more and more. I mean he fixes one thing, then another and while he’s in there he cleans up the wiring too. He does clean thorough work. What more could you ask for. Right on Chris and with Kevin breaking everything, you have job security 😁.
So nice to see some one doing something that's not just a job, but a passion and love for the trade. Nothing but props....
Uplifting others while adding value to the content is what will help this channel grow.
In the real world somebody good at what they do is great. Somebody who can find value in others and help them grow while directing them to a common goal is irreplaceable
Another great how-to and why video. This is how people like me can learn new ideas that make sense.
Chris rock's! What a mechanic and fabricator!!!!
Chris and Beca you two are awesome. Put some more seasoning on that front axle. 😂😂
The AAL lights have been beat to snot. i love that you keep sticking them back on. Great video guys. Thank you for your time.
Boys and their toys! It was all in good fun and no one got injured! At least you were able to drive away! Happy Trails to you both! Chris can fix that!
😊🤙
It is really nice to watch a master pro work. You do amazing work Chris
Very entertaining, Chris is a natural and his fabrication is off the hook. Bec is also a great addition to the vlogs ( and not bad on the eyes lol). Thanks and you all stay safe.
Chris is a legend. He is so good at his work and a great addition to the channel. Seems like fate hooked you guys up 😎
Always awesome to see becks at work. Her welding skills are on point
Now this is the back bone to all this off roading....Chris makes it all possible putting Humpty Dumpty back together again👈🤭😁😉this shows the other side....amazing work 👏 👏👏👏BRAVO
The wiring clean-up dropped my jaw. What a difference!
Chris is amazing! Love watching theses two work together!
Happy you are able to keep Chris busy fixing your stuff, while you get to keep playing with other toys!
Glad there was no major damage to any rigs.
That frame chop is awesome, nice job Chris.
I get the same "HA HA!" kinda excited feeling when cutting frames and other important parts off vehicles too 😂😂
You guys are awesome!
Watching this for the second time. Every time I watch your vids I learn something more. Thank you for being fun, educational, and just a real joy on RUclips.
Just like magic! Chris puts it back together!! Awesome! 👍😊
You know you’ve made it when you have your own live in fabricator and mechanic! Lucky!!!!
Some cool mods there. Fix n modify, all a part of wheeling. Shorten up for tighter spots. Love it all!
OMG! That was an awesome video. Wheeling, breaking stuff, then seeing the fixes. Wish we could have seen more of what Chris did with the wiring on the Step Child but the results were impressive.
He basically just cleaned out all the mess and wires that weren’t needed or being used (like the harness for the sway bar disconnect)
Nah. You really didn't. It was just shortening wires and cutting out Miscellaneous wire harnesses.
Chris and Beck are killing it. Great job!
Slow down Kevin, it’s not KOH for another couple months. I think you were giving it your all, this time.
I love you guys. Just found you guys couldn't sleep. Great build. Happy hearts.
Holy Diver Chris !
That's a badass frame chop, you Da Man man !!! 🤘😁
Your guys collision is a testament to those bumpers and parts he builds. Real world testing! Glad all you guys are safe.
Yeah actually it is a testimony to the builder of the bumpers which you've decided now you're not going to need because you want better approach angle, you already climb everything that's out there except unless it's for a buggy trail, you're waiving vehicle safety in pursuit of functionality that Jeep not capable of doing anyway. And what it's not capable of take buggy lines and it shouldn't. Kevin you're losing it buddy.
@@irishman312 except as Chris says, the producer of the original bumper, Next Venture, is going to produce the frame chop bumpers, so not sure where you’re going with that.
The bumper still bolts to the front of the frame horn, energy transfer is down the frame in the event of a collision and the frame in front of the coil buckets is less than half the strength of that underneath the cab. Changing anything from stock on any vehicle has potential to change the way it behaves in a collision. But where’s the fun in leaving anything stock?
@@irishman312 Say you’re new to the sport/hobby without saying you’re new to it.
That Ace hardware paint lays down so nice. 👌
I've been waiting to see this since I saw it on TikTok!
I think Chris is turning into the mad scientist… 🤣 love it….!!!
Funny. They called me the mad scientist back in the drifting days, cause I would make things work, that wasn't supposed to work.
I don't know where Ya'll found Chris but that was a great find for Lite Brite.
Good stuff guys, that is a huge improvement on approach angle, great work.
Ouch! Bummer y’all. Glad no injuries. Now for the next mods…! That LJ is pretty, and pretty capable. Seen some real bad mistakes with ABS; better to teach new drivers how to pump brakes, other driving skills we used to know. Chris to the rescue -again! Chop-Shop, anyone?! This should be fun. LiteBriteNationGetsShorter!
😁🤙
Awesome fabrication work. That was really fun to watch
Its cool to watch Chris's custom work. Lots of great ideas. Thanks!!
Only Kevin can wreck the jeep and get it back better than what it was. Great job Chris!
Chris is like a beautiful mind. Pure talent with a touch of madness
Just glad everyone is okay and glad to still see you in good spirits
Of course! Vehicles can always be fixed. 😊🤙
Chris and Bec are awesome, love watching the fab skills 👍👍
I had no idea about the sand ABS thing. Thanks for sharing the tip
At least your safe love your content Chris is awesome learning me a couple things
Awesome job on the frame chop and rear end !!!😎
Chris is an awesome addition and all around great content creator himself. You guys struck gold with him and beck. I’m surprised you don’t have a show on Motortrend yet!
Chris, Killer Fab Man!
Love it...Chris's fab skills are awesome to watch!
Love Beck n Chris. This episode again highlights the talent. That is all.
Your vid's just make my day. You are so lucky to have Chris and Beck
Chris, would love to see you do a review of the Miller 220 using all 3 welding techniques. Your an amazing fabricator, keep up the good work!
Waiting on some more parts and stuffs
Rubbin is racing!
Diggin these vids, other automotive shows would do the frame chop in multiple episodes, Lite Brite, one! Awesome!
Love seeing you two having fun and being honest as always. What a team you are. Love it!
We need a t shirt that says Chris can fix that.
We definitely do!
I want one !
Maybe another t-shirt could be "Kevin Breaks -- Chris Fixes". !!!
And Chris really is an excellent fabricator!
Chris's shop vids are so good! 🤘
Chris and Beck killed it...Kevin left some room (or none) for improvement.
Digging the garage vids with Chris and Bec!
Damn your good at whatcha do Chris , greetings from Calgary , Canada . come up here I'll take ya in the mountains ! Love the channel guys !
Ya know, I could see a LiteBrite Garage channel starting sometime down the road for all the working on vehicle stuff and things like that if it gets to be too much of that and all the other stuff. Either way, not a mechanic so watching this stuff I learn alot.
The jeep looks awesome with the front end cut. Have fun and keep up the great videos.
That frame chop is dope! The approach angle now is just insane, I love it!!
Absolutely love the journey you guys bring us on. I'm convinced Chris can do everything next level! Bec is just Badass period.
Well… that was eventful 😂😂😂 glad everyone’s okay and can’t wait to see both back
Chris is a wizard.
2 great talented people that can fabricate 5 Stars !!!!
Kevin just beatin on the Red Head,. Like it a step-child or something
🤣🤣🤣🤣🤣🤣🤣
Awesomeness video.... everything happens for a reason....you would like to not have wreaked, but it was for a reason.....To show the master tech talents again..... egarly awaiting your next video....Safe travels
I has an similar issue with ABS on a 300ZX on loose gravel (not sand).... much longer stopping distance.
You match perfectly as a team: the drivers and the mechanic fixing all damage afterwards. Both parts are equally interesting.
I wonder if the 9.0 RC winch will pull the 4door with heavy axles and wheels. It is on my bucketlist to replace my Smittybilt on my 2door to save weight.
It will! But we also have a Factor55 pulley if we need to increase our pulling power!
Glad everyone was OK. Chris's work on the front end chop and repair is great to watch, makes it seem effortless. Now if I can just figure out how to change my toilet paper roll.
The “Front-end Chop” was willed to the gods and granted. 😁
🤣
The clamp on handle for a spray paint can Works real well.
I won......That was freaking awesome 🤣🤣
Chrissssss we LOVE YOUUUUU!!!!
Chris is Badddd! love your work!
You guys are a great couple!!!!!
SUPER SWEET AS ALWAYS!! CHRIS IS THE MAN!!
Dude - I love having my car maintenance problem solving perspective broadened by watching this videos. For example, don't like how the winch lever is design, oh - just modify it so the switch is facing front. I would have been stuck figuring out how to build around it. Super Jedi-Wrench stuff going on here - love it!
Chris is looking like the Beck diet and workout regiment is paying off..got a leaner look to him.
You know... I was debating on picking up the Swag Big Hit rear bumper on that LJ. I think you guys answered my question. Thanks Lite Brite! 😅
Glad you both are safe. Battle scars on a rig are way better than on the two of you. And so happy Chris can fix anything.
Tazor should be a sponsor..
Jus sayin. I need one. Where is the link Lite Brite. Get that sponsor!!
Just call & mention Lite Brite!
The bomber is my favorite. 1:1
Can’t wait for more “
Kevin proof. Got to love it.
Lesson learned! Keep Jeep running in case of spontaneous race. Oh well, rubbins' racin' and Chris buffed it out!
Fun to watch. Thanks.
Nope... nope.. You rear-ended him . Plain and simple. Glad no one was hurt. Love you guys! Keep rockin!
Nah. That’s not what happened
Awww I now have to wait to see Kevin’s reaction. I hope you filmed it.
I admire your skills in the shop Chris! You make it look so easy! 🍻🍻🍻
Great video. Found out what the primary cause of my death wobble was. After checking the alignment, knuckles and bearings without finding an issue. Found that somehow (truly not sure how I did it), I loosened all four steering box mounting bolts to less than finger tight. Once I tightened those up, the wobble was gone.
What you neglected to mention is how 15 minutes before, when we wrapped up, Kevin said Great job everyone... Nobody broke anything... Then this happened.
LMAO Definitely should have mentioned that! Haha
Chris is da man.
Glad all were safe. Your gonna sell a lot of chose chops.
respect for Chris 🔥🔥💪👍
Great job guys. Nice job on the frame chop and the axle support.