You need literally like a whole football field of room with one of these just letting y’all know this isn’t practical unless you are only doing commercial.
Johnny Bobby yes even the dumpster length, I delivered one of mines today it’s just 12ft long and I was blocking the street and had to even get on the front Neighboors driveway, would be nice to have a set up like that on a medium duty truck instead of a trailer
Yes but the paint job was not the best but the craftsmanship is great. One can always re-paint. Powder coating is over rated. It does not flex and bend very well which will cause it to crack and start peeling. Also chips or nicks become larger bare spots. It is fine until the cracks Nick's and dents occur.
A 20k snatch block from tractor supply. I also have a 20k snatch block from Harbor Freight. The tractor supply version is heavier duty. You will also need a 20k D-Ring.
Nice outfit. Would have been cool if you didn't try so hard to shuck and jive it up. Would have been even cooler if you were close enough with the camera that we could actually see something.
Got one in the US and nothing but problems with no support. If you want to be broken down a lot and have no support get one. Order in the us and they will come damaged and all scratched up. The frame bent as it was not supported correctly then the hydraulic snapped. No support from company and looked to place blame and all cost on us. Don’t get one unless your hauling lawn clippings and in Canada so you can get repairs. This is a waist of money and a headache.
You are very correct. Ours broke in half and it was due to poor engineering. We have had a myriad of issues and Jacques has simply made poor excuses with no support.
Great trailer, thank you for the business!!
nice hook lift trailer i just ordered the maxx d 21k roll off today
Better go get a cal ant dot license
You need literally like a whole football field of room with one of these just letting y’all know this isn’t practical unless you are only doing commercial.
So you need a CDL class A for that setup also what is the cost on that setup and how much total weight
That’s a nice set up, but would suck here in houston, most these driveways are small and I can berly unload and load my dumpster with the winch
It has its cons.
Johnny Bobby yes even the dumpster length, I delivered one of mines today it’s just 12ft long and I was blocking the street and had to even get on the front Neighboors driveway, would be nice to have a set up like that on a medium duty truck instead of a trailer
Are you still running with your Cam-Concept hook trailer? I’m in Austin TX and I’m thinking of purchasing one over a regular roll off trailer.
Thanks.
@Monkey JumpStarr why are they garbage
Did you get the maxxd before they switched to powder coat? I just picked up this model and hope the paint holds up.
Yes but the paint job was not the best but the craftsmanship is great. One can always re-paint. Powder coating is over rated. It does not flex and bend very well which will cause it to crack and start peeling. Also chips or nicks become larger bare spots. It is fine until the cracks Nick's and dents occur.
what size truck is that ,3500 or 4500 , an how many tone can that container hold ..
Boss that is a Ram 3500 and you can get about 10,000 to 15,000 lbs of trash in the container. I recommend a 1 ton truck and above for this model.
Are you still running this Cam concept trailer?
So you got rid of this set up and went to the Isuzu?
Jbt, you mind sharing what snatch block you’re using in the duster video? I just picked up the Maxxd rolloff and so far really like it.
A 20k snatch block from tractor supply. I also have a 20k snatch block from Harbor Freight. The tractor supply version is heavier duty. You will also need a 20k D-Ring.
Johnny Bobby wouldn’t you need a snatch block and d ring rates at 36k?
What’s the specs on this and price
What company you bought your trailer from and how much did you get it for?? Thanks in advance.
Cam-Concept. Steel prices has risen so its probably not in the same ball park. They are about the same price as buying a hook lift with no truck.
@@johnnybobby862 HI, what was the BALLPARK cost and how long did it take to receive it? GREAT VIDEOS BTW! THANKS!
Cam-Concept. You would have to give Jaques a call.
Nice outfit. Would have been cool if you didn't try so hard to shuck and jive it up. Would have been even cooler if you were close enough with the camera that we could actually see something.
Do you still have the Maxxd?
Yessir
Got one in the US and nothing but problems with no support. If you want to be broken down a lot and have no support get one. Order in the us and they will come damaged and all scratched up. The frame bent as it was not supported correctly then the hydraulic snapped. No support from company and looked to place blame and all cost on us. Don’t get one unless your hauling lawn clippings and in Canada so you can get repairs. This is a waist of money and a headache.
You are very correct. Ours broke in half and it was due to poor engineering. We have had a myriad of issues and Jacques has simply made poor excuses with no support.
Can you guys give more details and updates on your issues with these? I was about to pull the trigger before I saw these comments