Oil And Filter Change 2018-2019 Toyota C-HR
HTML-код
- Опубликовано: 7 авг 2024
- Come along as I show you how to change the oil and canister oil filter. I will also show you how to reset the oil change required light.
Here are some of the tools that jimthecarguy uses
www.amazon.com/shop/jimthecarguy
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy. 
Авто/Мото
If anyone is curious, the cartridge oil filter wrench to loosen and tighten the cap is 64-mm.
❤ Thanks buddy!
🙏
Ty they lied......
You just gained another subscriber. Not only you’re a well articulated person, but you went step by step to the point of even resetting the maintenance light. And thanks to this detailed video, I changed my sister’s oil and filter. Thank you very much!
Much obliged, Jim, this Wednesday is my last free service day for my Toyota CHR 2019 LE, so I started looking up how to do oil change and found this video. Thanks for this tutorial, stay safe out there.
Isn't it funny Jim how canister/ cartridge type filters were in older cars then we went to spin on filters now so many new vehicles have canister/cartridge type again? Great job as always Jim!
Thank you great video and I appreciate that it was exactly what it said it was gonna be instead of clicking on it and talking about something different
Thank you for the information sir 🤙
Thank you Jim!
Thanks for the guidance! Couldn’t pull out the filter left it maybe next time.
Thank you so much🙂👍👍
Hi, great tutorial Sr. nice job.
Q/ do you happen to know how to service the transmission fluid , is recommended to changed it every 60 K ? what r your thoughts , thanks
This video is great but i have the push to start model how do o reset without the key ?😊
Hi! Great job a have a question i see that the oil plug doesnt come with crish washer and usually every car has one with the oil
Filter is this diferent on the chr?
Thank you for the instruction. It will come in handy after the warranty expires.
I have a good sense of smell and know the smell of fresh engine oil. On the dipstick the oil looks clear but the smell is polluted by exhaust fumes. Does this mean something dangerous for the engine? This is a 2021 C-HR hybrid with 2,000 miles, 0-W16 oil. The car is rarely used. I brought it to the dealer's attention during the inspection but they say it's normal and I don't really believe them.
Thank you.
FWIW, our 2019 had a normal metal cased cannister filter, not that cartridge filter, and the auto parts place listed both for that year. The cannister filter was Fram FF4967. Very small, so you need a filter wrench that goes really small.
I have a 2018 and it also uses the FF4967
Hoy Jim , You know if os te same filter for chr 2017? Thanks
Do we use the same method to reset the maintenance light if it's a push start?
what engine is this tutorial for? 1.8 hybrid? i just watched another tutorial and it had a regular spin on metal housing filter
What was the size of the oil filter socket again??
Where did you get the tool for the cap removal?
Hi Jim, where did you get the oil filter cap wrench remover tool?
Can I use 0W-20 GF-6A?
Thanks
My 2019 has a oil can style filter
Why did you change the O-ring? Just to have a better one on there, or was it damaged?
O Ring comes with all the new filters so it’s best just to get rid of the old one and use the new one supplied each time
you left out mention of the anti-loosen spring. If you don't disable it the housing will
never loosen.
majority of C-HR's that I see at the dealership are made in Turkey...yes they are Turkish built .....to date we have not discovered any hashish in any of the vehicles...
My 2019 c-hr is built in japan, lucky me i guess
The Toyota Dealership said Mobil1 Full Synthetic 0-20w...why do you say to use the Napa Oil? Many have also said to use AmsOil
Use any brand of 0W-20.
@@njsongwriter except Pennzoil. Lol!! (kidding, it's probably fine now.)
Good question. I'm not promoting Napa it just is what I used . As long as you use a good quality 0W-20 oil
@@jimthecarguy
That's what I thought... 🤔😉
And I've never seen a 0W-20 oil of any brand that doesn't meet the specs.
what canister removal tool do you use for the C-HR? I am finding conflicting information
i realize I'm kinda randomly asking but does anyone know a good site to stream new movies online ?
@Howard Talon Flixportal =)
@Connor Korbin Thanks, I went there and it seems to work :D Appreciate it !!
@Howard Talon Happy to help =)
@ BoShek It's called Toyota Oil Filter Replacement Tool
👍👍👍
Mine 100% does not have that cap on filter
First!
I will not go to Toyota to get my car serviced again for oil changes or any other type of maintenance because every time I leave there either light stays on an idiot light I'm talking about or I get a flat tire or something ripped underneath like the plastic fender cover was missing a few plastic clips to keep it on so that was making noise I mean maybe they want me back last time I was there they tried to charge me over $3,000 my under the vehicle plastic cover was halfway in different I said I need a transmission now before I go there I always check everything especially fluids I put all fluids in on top of them off I took my transmission fluid and it was fine it was topped this is one of those CVT transmission so you can't tell really where the topping is I heard you can stick your pinky in and check the fluid that way as long you can feel or see fluid on the tip of your pinky anyways I did that when I left I checked it with my dipstick because I did not feel anything with my I put my dipstick in all the way and there was barely enough showing now I have no transmission problems and thank I checked it right away and stuck right down the street got me some fluid and the guys hit the auto parts help me to fill it in the Corvette level never going back because that was the last job
👍🏽
That oil seems dark like a diesel or very overdue
Toyota actually is recommending 10k mile oil changes on these, not that that would be a good idea but 5k oil changes would be best.
shouldn't you measure how much came out and the pour exactly the same amount back in ?
That might be a good practice for transmission fluid but oil you can go by the dipstick.
I'm listening
Mobil 1 0w-20 and do it under 10000 miles or 2× a year,, worry free
Notes to self:
Full synthetic motor oil 0-W20, on the back should say gf5 equivalent
-
4.4 - 4.5 quarts back in
-
10mm bolts for the cover
-
Canister filter needs a 64mm cap tool for loosening and tightening
-
Drain plug is 14mm
-
Make sure gasket comes off with drain plug
-
When taking off the canister filter let it drain when you break it loose and then remove after that
-
Take note of how the replacement should go into the filter canister and how the gasket was placed before as well
-
Tighten by hand completely then come in with tool
Can't see exactly what are you doing. I can only see your hand. Very poor picture.
.
I agree
The video was actually pretty good and straight forward.
If you have a Metal cased cannister filter instead:
Oil filter part # #90915-YZZN1 (27 ft/lbs)
Oil Drain Plug Gasket part # #90430-12031 (13 ft/lbs or 3/4 turn)
Thank you.
You're welcome!