get it. I was like you, now recently up and running and can't imagine not having it. Def need a CAD program to get the full use out of it and likely need a post processor other than Langmuirs to do long form G-Code canned cycles of any sort (main drawback). They'll likely update since it's just a software shortfall at the moment.
Really sweet video, I'm looking at getting one before the end of the year (tax purposes for next year). I've been drooling over it. I need to build a dolly for it so i can move it if needed.
I don't have any but it might be a good idea. when you try to bore a small hole at high speed the machine shakes quite a bit. Some beefier legs would help that.
Hello! Great machine. I would need something smaller, but with the same abilities. I'm really not into this world (yet), so could you tell me some options? I looking for a machine, with roughly 25x25x25 cm workspace, and ability to mill on steel. Maybe thread milling also. Thank you very much.
Well I was totally like that's possible than you said mill steel. Most of the small machines might struggle with steel... Size gives you mass and leverage that give you rigidity which allows you to mill hard materials.
It shipped with a spindle that was too tight and it caused it to overheat and destroy itself. The second spindle they sent me (for free) has been running flawlessly. I guess they have a bunch of those tight ones they ship first. They are fine for lite usage and will eventually break themselves in over time. But fore people who push them hard.... You'll need one that is not tight. They might have gotten all the tight ones out of the inventory by now.
This is the guy you hang around..... This is the guy you ask to bring lunch to so you can hang out with him for the day and ACTUALLY learn something. LOL.
Thank you for sharing your knowledge, it is amazing. Can you suggest a free online course to learn milling please? I have no background. Lastly, for the capabilities the MR-1 has, is there another product with same or more capabilities and quality, but less price? Thank you much for your time!!
There are a couple for sure. I want to make a full video this topic at some point but for starters if you get their computer and touch screen you'll want a USB expander so you're not always unplugging things to load programs. This is the one I recommend. amzn.to/3wPMCrO
any idea when you'll post some steel results? we have similar backgrounds and have been looking at much more expensive machines-- but something like this would probably be much more appropriate
Sick video, I’ve been thinking about building a CNC machine for a long time (also an automation/PLC engineer) but I saw the price of this machine and at the price point doesn’t look too bad. Not sure how much programming you do and I need to do more research myself, but do you think there is or may be a possibility of adding a 4th or 5th axis? Eventually I’d like to have the capability of 4th or 5th axis but unless you build your own machine I don’t think there are lots of options for that on the market.
we to take this to the next level you'll need to change out the Langmuir controller to something like an Acorn board from Centroid. Than you can do 4th and 5th axis. That would also allow you to change out the spindle to one with and ATC and do tool changes. The machines is really good as is but if you've got the ability mod the control cabinet than the sky is the limit.
@@JF32304 You don't need a PLC to add a 4th or 5th axis to a CNC. You just need a controller that will support them. The Acorn board from Centroid will support 5 axis. You can buy Trunnions from lots of different companies.
@@BeckTools yes I stand corrected, you need a controller to interface with the additional axis and you need the physical trunnion. You get that and you're good to go.
Hey dude, cool video. Nice to see these machines reaching all walks of life. It's a big change from the early days when I started and the only people that could afford a CNC was a full fledged machine shop. I am looking at one for my myself but I am not sure if this machine has an ATC or do you have to put a break in and change yourself?
I just bought an MR-1, Currently waiting for delivery. You mentioned a pendant. Did you buy it from Langmuire Systems? When I purchased the machine, I didn't see a pendant on their website.
I all depends on the person. I've got my 10 year old son doing 3D modeling in Autodesk Inventor and 3D printing things on his own. If you're creative and good with computers the learning curve would be pretty short. If computers, creativity, and mechanical understanding are not things you excel in than well... You're screwed...
when I made this video the Z-axis bearing was installed upside down from the factory causing extra vibration and chatter. now that I fixed that I'm running a lot faster than in this video with much less noise. :)
Really cool to see a an actual review and product from one of these.. I'm definitely considering getting one once my shop is built..
Glad it was helpful! I'll be doing a lot more of these as I get more hours under my belt.
get it. I was like you, now recently up and running and can't imagine not having it. Def need a CAD program to get the full use out of it and likely need a post processor other than Langmuirs to do long form G-Code canned cycles of any sort (main drawback). They'll likely update since it's just a software shortfall at the moment.
Awesome video would love to see more about this machine!
More to come!
Nice video! Tempted to get one. Would like to see more on the Mr-1.
Coming soon!
Another great MR1 video, keep them coming, I’m buying mine in a couple months
More to come!
I'm so excited!!! I've been watching you for a long time, and I've been wanting to get an Mr 1 too! I have the crossfire pro already.
Awesome! Thank you!
Have you run any mild steel through it? If so how'd it do? Any chatter?
Not yet. I've got steel projects coming up that put it to the test.
Really sweet video, I'm looking at getting one before the end of the year (tax purposes for next year). I've been drooling over it. I need to build a dolly for it so i can move it if needed.
Good choice! I also might build some fork tubes into the bottom so it can be moved.
@@BeckTools get some bottle jacks from HF and make a dolly.
Do you have the concrete tie downs for the machine in this video? And would you recommend?
I don't have any but it might be a good idea. when you try to bore a small hole at high speed the machine shakes quite a bit. Some beefier legs would help that.
Hello! Great machine. I would need something smaller, but with the same abilities. I'm really not into this world (yet), so could you tell me some options? I looking for a machine, with roughly 25x25x25 cm workspace, and ability to mill on steel. Maybe thread milling also. Thank you very much.
Well I was totally like that's possible than you said mill steel. Most of the small machines might struggle with steel... Size gives you mass and leverage that give you rigidity which allows you to mill hard materials.
I would really like to see a basic "how to" video on thread milling with the MR-1!
Thanks for the feedback. I always need content ideas.
Looks dope. Would be interesting to see how much maintenance it requires.
It shipped with a spindle that was too tight and it caused it to overheat and destroy itself. The second spindle they sent me (for free) has been running flawlessly. I guess they have a bunch of those tight ones they ship first. They are fine for lite usage and will eventually break themselves in over time. But fore people who push them hard.... You'll need one that is not tight. They might have gotten all the tight ones out of the inventory by now.
This is the guy you hang around..... This is the guy you ask to bring lunch to so you can hang out with him for the day and ACTUALLY learn something. LOL.
I try to bring as much value as possible. :)
Thank you for sharing your knowledge, it is amazing. Can you suggest a free online course to learn milling please? I have no background. Lastly, for the capabilities the MR-1 has, is there another product with same or more capabilities and quality, but less price? Thank you much for your time!!
I don't know of any online classes. The MR-1 is by far the biggest bang for your buck!
What are the necessary accessories required to buy with this machine. I hope if u spend some time to tell me.
There are a couple for sure. I want to make a full video this topic at some point but for starters if you get their computer and touch screen you'll want a USB expander so you're not always unplugging things to load programs. This is the one I recommend. amzn.to/3wPMCrO
Here is a whole shopping list of the basic things you'll want to consider. a.co/dASKtAq
Can you use multiple tools and if that’s true is there an atc or do gonna change it by hand
No ATC. You Post each tool as it's own program. If you get a tool holder and prob it really makes the process pretty smooth.
any idea when you'll post some steel results? we have similar backgrounds and have been looking at much more expensive machines-- but something like this would probably be much more appropriate
Hopefully soon.
Sick video, I’ve been thinking about building a CNC machine for a long time (also an automation/PLC engineer) but I saw the price of this machine and at the price point doesn’t look too bad. Not sure how much programming you do and I need to do more research myself, but do you think there is or may be a possibility of adding a 4th or 5th axis? Eventually I’d like to have the capability of 4th or 5th axis but unless you build your own machine I don’t think there are lots of options for that on the market.
we to take this to the next level you'll need to change out the Langmuir controller to something like an Acorn board from Centroid. Than you can do 4th and 5th axis. That would also allow you to change out the spindle to one with and ATC and do tool changes. The machines is really good as is but if you've got the ability mod the control cabinet than the sky is the limit.
@@BeckToolshow are you going to add the 4th/5th axis? It's not just about the PLC, it's also about the trunnion.
@@JF32304 You don't need a PLC to add a 4th or 5th axis to a CNC. You just need a controller that will support them. The Acorn board from Centroid will support 5 axis. You can buy Trunnions from lots of different companies.
@@BeckTools yes I stand corrected, you need a controller to interface with the additional axis and you need the physical trunnion. You get that and you're good to go.
Hey dude, cool video. Nice to see these machines reaching all walks of life. It's a big change from the early days when I started and the only people that could afford a CNC was a full fledged machine shop. I am looking at one for my myself but I am not sure if this machine has an ATC or do you have to put a break in and change yourself?
No ATC. You have to post 1 tool per program. If you get the tool setter you can swap tools really quickly.
I just bought an MR-1, Currently waiting for delivery. You mentioned a pendant. Did you buy it from Langmuire Systems? When I purchased the machine, I didn't see a pendant on their website.
Yes I did get it from Langmuir. They run tones of adds for it so I'm sure they still sell it.
store.langmuirsystems.com/collections/mr1-addons/products/mr-1-wireless-jog-pendant
What's the learning curve for someone without an engineering background that's looking to design and make his own parts
I all depends on the person. I've got my 10 year old son doing 3D modeling in Autodesk Inventor and 3D printing things on his own. If you're creative and good with computers the learning curve would be pretty short. If computers, creativity, and mechanical understanding are not things you excel in than well... You're screwed...
👍👍😎👍👍. Well done 🙏
Thank you 👍
Feedrate seems a bit high...
when I made this video the Z-axis bearing was installed upside down from the factory causing extra vibration and chatter. now that I fixed that I'm running a lot faster than in this video with much less noise. :)
I'm very dubious this machine could mill any steel
I run steel parts on this machine all the time.
@@BeckTools what tolerances does it hold
@@joewboe well that depends a little bit on you and you're assembly abilities... I can bore dowel holes +.0005 without using a reamer.
@@BeckTools I'd be curious to see a video on this
@@joewboe I made a video on how to eliminate burrs that shows it.
This is a messy design , chips flying everywhere . Atleast Make some ballscrew & rail cover
working on it.