Evolution R210 Compound Mitre Saw full review
HTML-код
- Опубликовано: 22 июн 2019
- Buy this on Amazon now: amzn.to/39E2n4q
Or check out the R210 Sliding Mitre Saw: amzn.to/37zmbUZ
Evolution mitre saw stand: amzn.to/2SRTrCK
Putting it to the test with a full review of this small but very capable mitre saw.
Multi purpose blade allows you to cut through steel, aluminium, plastic and timber.
Lightweight and compact design with high torque motor.
www.evolutionpowertools.com
Model: Evolution R210 CMS
DON'T WANT TO MISS A THING?... Subscribe now!!
/ @jbtv
CHECK ME OUT HERE:
Facebook: / justinbailly
Instagram: / justin.bailly
Pinterest: www.pinterest.co.uk/justinbai...
Web: www.justinbailly.co.uk
Email: justin.bailly74@gmail.com 
Видеоклипы
Really useful, thank you so much for putting the time in
There is two bolts at the back to adjust the blade 90 and 45 . One on the left and one on the right . Need a smaller Alan key mate oh and a spanner
Brilliant review, really helpful for those new to mitre saws! thank you very much
Great video mate, straight to the point. Thanks
Really helpful, instructional video. Thanks for putting the effort into making this user-friendly for beginners!
Thanks Justin, that was very helpful 👍
Its a decent saw for the money to be fair. I just got one (spark by trade) and it happily cuts Metal Tray/ trunking and conduit with ease.
Really useful saw to have for jobs round the house also and only £60
Great review just subscribed 👍
Nice one, cheers man 👌
Very helpful thank you!!
Good video just bought one and looked at utube and seen your video.
Excellent explanation
Thank you
Setup the machine, there are various adjustments to do this fully!!
great video thank you very much
Excellent, comprehensive review. Thanks!
On the 45 degree mitre , the saw blade is not perpendicular and needs to be adjusted. It is not adjusted at the factory and is left to the end user to do. Perhaps you would be kind enough to give us a user guide on how to set up the Evolution R210. Bearing in mind that the target audience for the saw is probably hobbyists, photographers, artists and weekend carpenters. Who could use all the help they can get. Which is why we come to experts like your good self. Thank you Justin and please keep up the good work.
@yoochoooob Thanks for the info: That's much better. But I feel Justin should make a contribution. It's not that he's given us wrong information. It's just that he hasn't given us the right information. So if he wants to maintain credibility he should make amends and give us the full correct information. Otherwise what's the point if having a YT channel where you're giving information that people cannot trust.
Photographers?
Did you check that the fence was set correctly before trying the 45 degree cuts?
Hi Justin, I enjoyed the video a lot - very informative, and made sense of the multi-language instruction booklet. Would you think a standard Black & Decker Workmate would be stable enough to screw the 210CMS onto to use for outdoor (larger) work? I'm asking because the Evolution stands cost almost twice as much as the saws!
Great video Justin. Does the blade rotate smoothly by hand? Mine feels a bit rough but maybe it's the brushes rubbing against the windings. It's brand new and cuts fine but I thought it would spin smoothly by hand.
So can the fence and the angle of the saw be adjusted with allen key screws like other miter saws?
yes it can, i had to do this too
If you look at left and right sides of the blade you will see the stop adjusters set it up for 90 and 45 this saw will cut bang on cuts look before you slate this saw its not hard come on
Iv had this saw for years the only thing I hated on it was the noise levels it seemed alot louder than others iv used.
hi there i recently got mine, can you tell me if the lower and upper guard is supposed to have a wobble? mine wobbles quite a bit and not tried my saw incase unsafe.
You needed to set it up ans fine tune using the adjustable Allen key screws.
How do you rectify the 45' angles? The 90' is fine. ( I don't need the bevel). Many thanks.
Adjustment of the angle, is via the two stop screws at the back of the machine
Adjust the bloody fence 😂😂
Thanks for good review
I'm not sure I would recommend this to anyone for a first mitre saw. I find the stops to adjust the angle have loads of play in them and I'm constantly having to get the square on it to check before each cut and if you're a beginner, you just don't want tool inaccuracy on top of your own newbie mistakes. I cut straight through the fence on the first bevel cut, because I'm a novice plum. It is powerful enough, but I find there is a substantial amount of tear out on the bottom and the rear. I think this is probably best for a jobsite saw, cutting pipe and trunking.
Ive bought one, yet to use it. Ive heard there are isues with cutting steel angle. Any input?
I've had no issues with it, as long as the piece is securely clamped 😁
Can it fit on tressels
Like a knife through hot butter 😂 😂😂
Piece of 3x2 under clamp less wind down work with what you got !!
can this use for tile cutting?
No, the blade could handle it but the tile would shatter
Not me watching 1:46 over and over again trying to understand how to lift the saw up. I don’t know if I’m insanely weak or what but I can’t turn or pull the knob you turned….
Edit: got there in the end! At around 2:20 - thank you! 🤦🏻♀️
Do you have to build it first before you use it.
No it should be all ready to go
Just bought one just set it up with the evolution stand its totally solid stability wise. Its my 1st saw so dont know any different. I'm looking to do skirting boards and architraves I'll see how it goes
Solo-repair9 how did you get on? I’m thinking of buying for skirting
You forgot the extending stabiliser at the back. Also metal sparks into a canvas bag with sawdust?
exactly do not put the bag on back if working on metal, great point
Guess what the allen keys are for...
Combination squares are not the most accurate anyway. Should’ve checked with your speed square
Why didn’t you show how to adjust the various angles,it’s not difficult..
just in case anyone has the same issues with true angels the link i posted shows the fine tuning the male shows straight out of the box, this product cant be used straight out of the box until you follow the video link ruclips.net/video/-3FSLNnj8tk/видео.html
You need to watch this video to set up the saw: ruclips.net/video/nW2IKqYLxo0/видео.html
mine doesnt cut correctly the angles too. i was well pissed off as ide started to make pitcure frames for making a bit of extra cash and gifts fro crimbo. kind of defeats the object of it being a mitre saw. you would have thought thae mech for angles was more refined in the design process. shame on evo for releasing it without thourough testing
Don’t buy this spend a little more, I put it through it’s paces on project and it sucks now compared to how it was out the box. It’s cheap and inconsistent
Thanks 😊