Well presented guys. Loves Matt’s aircraft ever since he created the Original Timber. Flying over here in Australia has never been the same!! Thanks mate
Interested if they bring out one in grey or green with military style decals. Like the plane hate the paint scheme. Sell it in all white and I'll airbrush it myself, just to hard to cover orange.
You know I’ve enjoyed almost every single bind and fly Eflite/Horizon Hobby product I have ever bought and I own maybe 60. I gave up on the failsafes a few years back but I won’t give up on the bind and flys. Just keep them close.
I received the invoice for the one that has shipped out Today. Due in on next Tuesday. This plane will be #390 of my personal Squadron. Horizon Hobby Legend Member. Capt R. Morgan. Looking forward to getting it into the air.
I really Love mine. Fly's like on rails. have made a few up-grades and wanted to add a Reverse ESC , like on my police Fan Boat from your company. Would be nice to be able to back it up like the Real HC-27J" Spartan". Takes off full flaps in 3'. Candy Drop next event at my club. Great aircraft. A1.
I know this is old, but what are the correct part numbers for the Y harness and EC3 to EC5 adapter? Since the ESC is an EC5 connector, I don't see any reason to use IC type connectors. I ordered EC3 Battery Parallel Y-Harness EFLAEC307 and it seems to be correct. I also ordered EC5 Device To EC3 Battery EFLAEC509 but it has the wrong connectors. The EC3 end, which I assumed was to connect "To EC3 Battery" is the same type that is on the battery with female pins.
Can this be setup with Differential Throttle so that tighter taxi on land and water is possible. I suppose you could only do this by getting the PNP version, use a regular Rx, plug each esc into a separate channel and do an on/off Rudder mix with both. I do this on my float equipped Twinstar II and it works great (no need for a water rudder).
Be sure to check out the NEW Hangar 9 Tiger! It's based on the Carl Goldberg design and can be flown with gas, glow or electric power: ruclips.net/video/DyXRuhV-Jcw/видео.html
Be sure to check out the new lower price on the Commander mPd 1.4m...it's an excellent low wing sport airplane! www.horizonhobby.com/SearchDisplay?searchTerm=commander_mpd&categoryId=&sourceDomain=&storeId=10151&catalogId=10051&langId=-1&pageSize=40&beginIndex=0&sType=SimpleSearch&resultCatEntryType=2&searchTermScope=2&showResultsPage=true&searchSource=Q&sourceDomain=&pageView=
We’ve officially tested and can recommend up to 4S 6400mAh…which weighs about 20.5 ounces/580 grams. A bigger/heavier battery might work, but CG, airframe strength, etc. are all considerations you will need to account for.
Grand slam on everything!... except the 5 blade prop (should be 4 or 6), non retracts, and mostly, that terrible nose design... Everything is screaming the obvious HC-130 Hercules but the nose.. wish you used the stepped nose style, but I may still buy it!
I bought one and wanted to put the floats on, the manual says "there is plastic inside the screws thread into, its not just threading into foam" well, that was true for the rear two mounts, the front just pushed into foam and threaded into nothing but foam.
Our apologies for that! And as Matt noted around the 39:30 mark in this video, you will need to use longer screws than those supplied to properly install/secure the front mount for the floats.
@@HorizonHobbyProducts all the screws I got were the same length. I double checked. I also got a random part that looks like landing gear off of a small model. No idea what that was about.
I'm glad to say this is my first larger scale rc plane I've bought and I can't wait to get it out flying
PNP caught during the COVID-19 Fall 2020 sale for $277.00! My wish list is shrinking! Thank You Horizon Hobby!
It was a good live presentation, good job! I was glad to be a part of that live event on Facebook!
Well presented guys. Loves Matt’s aircraft ever since he created the Original Timber. Flying over here in Australia has never been the same!! Thanks mate
very nice, looks like a fun plane. I hope you guys release more multimotor planes similar size...
It's based on the C-27J Spartan. The only cargo aircraft in the world that does an aerobatic airshow demo.
Interested if they bring out one in grey or green with military style decals. Like the plane hate the paint scheme. Sell it in all white and I'll airbrush it myself, just to hard to cover orange.
Again another stunning looking plane ,as usual i bet she flys like a dream.
Check out this Flight Talk video to see it in action! ruclips.net/video/opSR3H8J6vY/видео.html
Another Amazing Aircraft from HH!
Love the paint scheme!
Love the Cargo Bay Door!
Thanks HH!
I know it is kinda randomly asking but does anyone know a good place to watch newly released movies online ?
@Dawson Aaron Flixportal :)
thank you, I went there and it seems like a nice service =) Appreciate it!
@Dawson Aaron You are welcome :)
Matt better be designing Mike Patey’s Draco for Horizon Hobby
Really beautiful this E-flite EC-1500 Twin. 😊 😎 👍
Nice presentation guys. 😊 😎 👍 Yvan 😊
Yvan Desgagne are you getting one ‘Y’ ? Especially with ski’s!
You know I’ve enjoyed almost every single bind and fly Eflite/Horizon Hobby product I have ever bought and I own maybe 60. I gave up on the failsafes a few years back but I won’t give up on the bind and flys. Just keep them close.
this is a great plane.,, just what i am looking for,,,but i,ll need a camera system,
A little Vertical Horizon going one here.....Echo Echo....O 👍🏻 Edit: This does look pretty big!
Looking forward to your unboxing & maiden GB!!!!!! LOL!
Looking forward to see it in the shop's in the u.k
I received the invoice for the one that has shipped out Today. Due in on next Tuesday. This plane will be #390 of my personal Squadron. Horizon Hobby Legend Member. Capt R. Morgan.
Looking forward to getting it into the air.
I really Love mine. Fly's like on rails. have made a few up-grades and wanted to add a Reverse ESC , like on my police Fan Boat from your company. Would be nice to be able to back it up like the Real HC-27J" Spartan". Takes off full flaps in 3'. Candy Drop next event at my club. Great aircraft. A1.
It's a CASA 212. How about some Spanish markings?
Where is draco,¿?!
The guys called this a good 3rd plane. What are recommended second planes (after the Carbon Cub as the first)?
Great Vid guys 😎😎😎😎😎 The plane looks SWEET!
I know this is old, but what are the correct part numbers for the Y harness and EC3 to EC5 adapter? Since the ESC is an EC5 connector, I don't see any reason to use IC type connectors. I ordered EC3 Battery Parallel Y-Harness EFLAEC307 and it seems to be correct. I also ordered EC5 Device To EC3 Battery EFLAEC509 but it has the wrong connectors. The EC3 end, which I assumed was to connect "To EC3 Battery" is the same type that is on the battery with female pins.
You should use wing aspect ratio to classify the planes
It looks a lot like the HC-144 used by the coast guard
Looks awesome 👏 been waiting for something like this. Great design. Very versatile. Really like it. But it’s AU$650 😱
Can this be setup with Differential Throttle so that tighter taxi on land and water is possible. I suppose you could only do this by getting the PNP version, use a regular Rx, plug each esc into a separate channel and do an on/off Rudder mix with both. I do this on my float equipped Twinstar II and it works great (no need for a water rudder).
Tom C I can't see any reason why you couldn't-it will have a Y lead to the ESC's so just take the Y lead out 🤷♂️
Nice jod Matt..!! ..Jay bang the drum slowly.. lol ty4sharing!!
Love my viper ..!!. Oh she dose have safe..
I just bought a used one for $75 at our local Hobby shop. Can’t wait to fly it, maybe drop a plastic Jeep with a parachute lol
With floats on, how much user-weight can it carry?
Does it accept the GPS module for beginners?
Don't know if it would be possible but a SIG Asto Hog would be great with electric power.
Be sure to check out the NEW Hangar 9 Tiger! It's based on the Carl Goldberg design and can be flown with gas, glow or electric power: ruclips.net/video/DyXRuhV-Jcw/видео.html
I love this thing when is it coming out in the Britain lot of love on this model it looks exciting 🛬😇
hoping for a large scale low wing sport plane, available now only in balsa. anything coming up?
Be sure to check out the new lower price on the Commander mPd 1.4m...it's an excellent low wing sport airplane! www.horizonhobby.com/SearchDisplay?searchTerm=commander_mpd&categoryId=&sourceDomain=&storeId=10151&catalogId=10051&langId=-1&pageSize=40&beginIndex=0&sType=SimpleSearch&resultCatEntryType=2&searchTermScope=2&showResultsPage=true&searchSource=Q&sourceDomain=&pageView=
the color scheme could have been more military to add a bit more appeal visually!
Oh I want it!
...they call you "Blade Thrower"!
William Decker ninja!
What is the absolute heaviest battery it can carry?
We’ve officially tested and can recommend up to 4S 6400mAh…which weighs about 20.5 ounces/580 grams.
We’ve officially tested and can recommend up to 4S 6400mAh…which weighs about 20.5 ounces/580 grams. A bigger/heavier battery might work, but CG, airframe strength, etc. are all considerations you will need to account for.
How fast can it go?
Just looking at the plane sitting there with the audio off it looks like it would fly like a government block of 🧀 cheese!
Can it fly 6s
The eco in this video is real
Will a 6s 4000mah work?
The power systems are 3S and 4S compatible only (6S is too much voltage).
Super PLANE 🏆🏆🏆.
SUPER FILM 🥇🥇🥇.
Very nice look it 🙂.
I greet You warmly from Solar ŻYWIEC
kazek lakiernik fokstrot
🙂😉🦊FOX
From Poland
very nice but, oh god that color scheme... why ?
What is the flight time?
5-10 mins depending on battery and flying style
Floats🍺🍺🍺🍺🤣
Grand slam on everything!... except the 5 blade prop (should be 4 or 6), non retracts, and mostly, that terrible nose design... Everything is screaming the obvious HC-130 Hercules but the nose.. wish you used the stepped nose style, but I may still buy it!
I bought one and wanted to put the floats on, the manual says "there is plastic inside the screws thread into, its not just threading into foam" well, that was true for the rear two mounts, the front just pushed into foam and threaded into nothing but foam.
Our apologies for that! And as Matt noted around the 39:30 mark in this video, you will need to use longer screws than those supplied to properly install/secure the front mount for the floats.
@@HorizonHobbyProducts all the screws I got were the same length. I double checked. I also got a random part that looks like landing gear off of a small model. No idea what that was about.