2 Years of the Best Plane Horizon Hobby Ever Made - E-flite EC-1500
HTML-код
- Опубликовано: 1 июл 2024
- The E-flite EC-1500 is our all-time favorite Horizon Hobby model. 2 years later and here's what we've discovered about it - from being a potent acrobat to having an impressive presence to it, the EC-1500 is untouchable and can do so much that it's never going to be replaced in our hangar.
Setup Guide: • Simply the Best Cargo ...
Bind & Fly: bit.ly/EFLEC-1500
Plug & Play: bit.ly/EFLEC-1500PNP
Equipment Used:
4s 30c 4000 Smart Packs: bit.ly/43dFhgq
EC-1500 Float Hardware: bit.ly/3HqZO9v
EC-1500 Compatible Floats: bit.ly/3WcrLFU
Rust-o-leum Gray Primer (to paint match the floats to the plane): tinyurl.com/EC1500FloatPaint
🙋♂️Connect With Us On Social
💻 Two Brothers Discord: bit.ly/TBRCDiscord
🛒 Shop our merch: bit.ly/TBRCMerch
⌛ Tiktok: / 2brosrc
📷 Instagram: / twobrosrc
📦 Products We Recommend
Receivers:
Spektrum AR10360T Receiver: bit.ly/3SuAlPv
Spektrum AR8360T Receiver: bit.ly/3QBdgtc
Spektrum AR637T Receiver: bit.ly/3dCjiuO
Transmitters:
IX20SE: bit.ly/3BI3eBD
IX20: bit.ly/3BQvB0u
IX14: bit.ly/3D1Gg8w
NX10: bit.ly/3Qm6BSR
NX8: bit.ly/3bA4dcA
NX6:
Servos:
AGFRC B13DLM: tinyurl.com/B13DLM
AGFRC B11DLS: tinyurl.com/B11DLS
Hitec HS-85MGs:
Batteries:
4s 30c 2200 Smart packs: bit.ly/3SsoUrB
4s 50c 2200 Smart packs: bit.ly/3dcdBU3
6s 50c 5000 Smart packs: bit.ly/3A0jVY2
6s 50c 4000 Smart packs: bit.ly/3JANxOL
#rc #aviation #rcplane
rc plane, aeroplane, rc planes, airplanes, airplane, aircraft, model airplane, flying model, tutorial, learn to fly, crash, rc plane crash, plane crash, tail heavy productions, brian phillips, the rc saylors, the rc geek, flite test, flitetest, petrincic bros rc, joe nall, ec1500, horizon hobby, C-27j, spartan, USAF, coast guard, aileron, flaperon, flaps, rudder, elevator, flat spin, rolling harrier, inverted, landing, touch and go, stall, recovery, hovering, Spektrum
0:00 Acrobatic Potential
2:33 Stall Characteristics
3:14 Downsides
4:11 V1 to V2 Changes
4:46 Cargo Droppage
5:16 Float Flying
7:30 TwoBros Score 
Развлечения
This video just made life harder deciding in the RC world. My son and I have our list of RC trucks, etc. He's upgraded and can operate really fast huge trucks at extreme speeds. I decided to test his skill to see if he has it. He mastered a beginner drone in 20min. Ok, well, now lets get out of so-so drones which wasn't the cheap $50 drone but a solid beginner format. I went into a local shop that only ships worldwide and doesn;'t have a storefront for the public who only deals with race drones. Like real deal race drones. They were really cool and showed me around the shop and what they have. He went into extreme detail and chatted for hours after closing. I owe their being so cool a major thumbs up. They only focus on race drones. So after we went through whats best, I have to choose as commercial drones are NOT race drones. I want to get a pair of mini race drones to get him ready. Then we can upgrade later to full race drones. But then, I wanted an even more insane race drone but for a 9yr old is way too much. So if I got that, I could get him a lighter watered down version race drone. But then I want this EC-1500 and had my eyes on it. The shop I normall go to thats been around since I was a kid is ordering me a good sized Blade 330 Helicopter with carbon fiber blades, etc. But then they also have an eFlight F18 that is also awesome. I then bought a DJI Mini3 drone but would rather have the DJI Avata 2 or the DJI Mini 4 Pro. Can't decide but should relax a bit. I am ok but ordered the RealFlight Evolution so little dude can really get good on the sticks and will arrive tomorrow. I need to step away from this scene for a bit. This hobby is no joke and costly. Breaking the rc trucks all the time and now stepping into planes as I missed my ol childhood days flying helicopters and planes. It'll get him off the ridiculous eletronics and outside we used to do as kids in the late 70s and early 80s. Those that were older in the 70s and not a little kid know what it was like to enjoy life withouth distractions of fake social media, etc. Anyways, good video. I think I have to keep this one at the top of the list.
Great review and comments. This will be very helpful with my new V2 that I got at Joe Nall Week. Two other features that you did not mention is that for those of us living in space confined areas, my condo, it is very convenient that the plane comes apart for transport and storage. Not only do the wings come off, but it’s stabilizers as well. It makes it much narrower. I saw the comment about concerns about the winging not being able to take the stress of 3D. The thickness of the wings spar is the thickest carbon fiber rod I’ve ever seen on a plane of this size. Keep up the good flying and good work.
Great Review !!! It's on my Birthday wish list now ! I had no idea it was this capable - and the floats are awesome.
Fantastic job on the video Jon on showing what this plane can do👍👍😎😎👍👍
Great long term review 2Bros!! I absolutely love this plane and you showcased how beautiful this prop plane really is! Great Job HH for the release. If you do not have one, PICK ONE UP!
Awesome plane. I love seeing people get excited about plames like this. It just gets me more pumped for the hobby. Hopefully one of these days ill be able to get one of these and fly it myself!!
Cool video guys! This plane is definitely on my radar! I love it’s size, looks and versatility. I really enjoy the commentary and review!
Thanks for watching!
Great flying Jon! This one is on my wish list haha..
Impressive float dancing. It is on my bucket list.
Really enjoyed this video and keep doing what you do with your channel.
Thank you so much!
Great video as always. I've missed you guys. I never get you in my RUclips feed anymore. I hate how they do things. I finally remembered to search for you and I'm catching up now.
Hey, thanks! Happy to have ya back!
Mine is finally on it's way to me🤩
Excellent long-term review, Jon! I definitely need to pick one up!
You should!
I have 2 of these v2 ec 1500s
Great vid Jon. Without a doubt, my favorite twin to fly right now. So many things you can do with it.
Gotta agree with 99% of this.
I am also biased as I'm on my third one of these. Bought and crashed (after many flights) my first V1, replaced that with a second hand one, then Horizon gifted me a V2.
One of my favorite planes. So versatile and fun.
Only negatives and not exactly negatives, more of a do this wrong and it will bite you thing.
If you're a little slow making a turn and add a little rudder into the turn it can snap into the death spiral. Easy to avoid but something to be aware of.
And in high energy maneuvers with hard elevator pulls it can experience an accelerated stall and roll out. Again just something to be aware of not really a fault in the design.
Good video, good flying as always.
Keep up the good work Jon 👍
It's important to note that almost any airframe can be put into an accelerated stall. The only ones that can't are limited by-design, such as the 70mm F-16 from E-flite/FMS. There isn't enough throw on the tiny elevator to force the wings to break airflow at any airspeed.
I was skeptical when I saw the title. I like your content though and decided to check it out. After watching you wring it out I'm a believer! Added to my wishlist!
Nice flying.....may need to purchase a V2 meself.....
Awesome review, I should have bought a EC-1500 instead of the Twimber, I wish I had room for both.
Sell the Twinber and get the EC-1500. It's a good step up!
@@TwoBrosRC I have recently started back in the hobby, can you please suggest a source to sell it. Other than Facebook and eBay. I heard there is a online forum.
You can try RCGroups.
@@TwoBrosRC thanks Jon
This is really cool to see! How are the wings for taking on and off if you have a very small car?
Pretty decent, though the nacelles tend to get in the way.
Thanks!!@@TwoBrosRC
Hi Jon.
Any chance you could do a video on getting the TTevo flaps to come down more than standard. You mentioned it in a TTevo guide a while back. Cheers 👍
It should be covered in the setup guide. Hop into Discord and we can talk to you about it. bit.ly/TBRCDiscord
@@TwoBrosRC Discord link says expired/unable to accept - or maybe it's just me
This is the one airplane I can't wait to own! I wish you could still get it in the Coast Guard colors. Transmitter question. Spectrum or radiomaster?
We fly Spektrum. People love RM for the price, but we've never heard anything good about the brand aside from that.
Looks like you have setup a lot of mixing with flaps and ailerons. Hardware wise, is it capable of that “out of the box”? It looked like you had done some of the same with the V1. Did you have to do any modifications (receiver, servo wiring, etc.) to get it to work on the V1? Did you opt for the wider flap or aileron configuration?
Everything we showed here is the full potential of the model as it ships from the factory. All you need is a transmitter with enough channels to follow the setup guide we posted. It uses the large flap configuration with full span ailerons.
@@TwoBrosRC Thanks. Was the setup guide something you put here on RUclips or somewhere else? I will take a look around for it.
It's linked in the description: ruclips.net/video/Cqi6VCL58Ao/видео.html
I have lost 2 of the aileron / flap 'joiner' covers and was wondering if you guys have had a similar experience and if so how did you fix it? Thanks
We reached out to Horizon about the joiner sections on V1 and got a new wing when we described the issue - long before we got serious with RUclips. If you explain that you're looking for those components only, you may be able to buy them or they may send them to you. Doesn't hurt to ask.
I use a little piece of tape on the covers so they don't slide and fall off.
Might've missed it. What battery r u using to hover?
Spektrum 4000 packs can hover easily or Spektrum 2200 4s packs run in parallel: bit.ly/3SsoUrB
@@TwoBrosRC thanks
😍😍😍😍😍😍
Is there a way to put a camera on it
The nose comes off and allows for installing a camera.
What happened to the live premiere of the Rafael?
Deleted mid stream?
We uploaded the 64mm instead of the 80mm. It's getting reposted in about 10 minutes when Jon has coffee.
@@TwoBrosRC lol okay 👍
It's reposted and going live in the next 4 minutes at 11:30 EDT.
Wont be able to fly this at my local airfield; the wheels are too small and the field is muddy
Put the skis on!
Anyone in NC east of Raleigh wanna trade 2 v1's for a v2? One is original paint,the other has been painted black and grey, and has Callie Graphics C27 cockpit decals.
You'd probably be better off trying to sell them individually.
I had the v1 plane for about a year. Out of the 20 eflite models I've owned and flown, this was the worst plane I had. The door was useless, the props are so low they are easy to prop strike on landings and takeoff. Yes it was powerful and aerobatic, but I hated 3d flying, not because of the plane but every flying field I took it to if get non stop comments about how it's not a 3d plane and the wings can't take the load and I should stop 3d flying it. I was happy the day it finally sold.
Being entirely objective: if you're prop striking, you're making a mistake somewhere in your piloting. Either you're not correcting for a crosswind (pilot error) or you're coming in tilted when landing (pilot error) - if it had smaller propellers, it wouldn't have the same performance that we're showcasing here.
We're not sure how people telling you how to fly has any bearing on the plane. Fly how you want. If some crusty old guy doesn't like how you fly, tell them to get bent. It's your plane and you can fly it how you want.
@@TwoBrosRC people over your shoulder telling you what to do while your flying makes it frustrating.
As for the prop strikes, if the props are two inches off the ground and the grass is an inch and three quarters long. You have a quarter inch to play with. I never wrecked a prop, but damn, this plane was honestly the least fun to fly. It's just, not good. The gimmicks didn't work, and the nest inside for wiring was terrible. I had a servo go out and it was an absolute nightmare to replace. I'll stick with my Pitts 850 or my extra 300.
Grass clearance is a fact of life for any pilot flying from grass, be it props or jets. It can't really be an EC-1500 if the wheelbase is extended so that the model doesn't clip grass when it takes off and lands. Even Timbers and other similar models will cut grass if it's long enough. Sometimes the issue lies in the choice of flying field. For what it's worth, yeah, ours did occasionally clip the grass when we flew it off grass, but it's kinda hard to hold that against the plane when we chose to fly from a field that had unkempt grass.
Sorry to hear your experiences weren't good, but we wholeheartedly disagree that this plane has "gimmicks" - because it flies exceptionally well. If you ever consider one again, try setting it up the way ours is. You'll most likely find it a lot more enjoyable.
Horizon shill!