Boba Motoring I'm not much of a fan of the Japanese imports but since its your channel I give it a thumbs up. That thing rocks pretty good, I'll give it that.
Evo is a car which would not work properly in a couple of weeks after tuning it Evo owners won't admit that but they aren't that reliable as you think when you tune 'em Other than that it's a really fun car to drive or go crazy with
it's goood but there is still much catching up to do...Jett racing here in Australia has run 6.4s in their 4g63 powered datsun 1200 and down to 6.57 in their 4g63 powered eclipse. both of these were years ago too, I have not kept current with Jett Racing's progress, so the times may be lower than that. still a fucking beast though.
strange !?!? german tuners but they tune japanesse engine !! what happened with BMW engines?? can they sustain such revolutions per minute?? i dot think so !!
Kann ich bei euch ein Praktikum machen als Kfz Mechatroniker 😊😊😂😂😂Muss sogar echt eins machen aber hab kein Platz bekommen deswegen schau ich mal nach ne Platz in den Pfingstferien
Bis vor kurzem hatte der Wagen ja noch Straßenzulassung (und da war er auch schon bei über 1.000 PS - wobei die logischerweise beim eingetragenen Ladedruck nicht anliegen).
How in the world did you get the ignition system to work at that kind of power on E85 with what looks like a stock coil, and Ecmlink. I know that's no small feat.
3,8 bar ladedruck..... wahnsinnig.... aber leider geil!!!!! wann ist eigentlich die GrenzeBzw das Max an boost erreicht, wieviel bar ladedruck geht da eigentliche, noch Luft nach oben?
Seriously, I love you guys. But why not use 2 turbos? No engine can handle 3.9bar turbo for long. Thats just stupid. BMW 1.5 liter engines produced 1500hp with 5+bar, and turbo was DONE after 5 kilometers (Formula 1). That said, I love you kick Dragtimesinfo channel guys like they were little whores...Please make more videos you magnificent bastards!
But physics are not matey. But you right ofc. If you make engine block with something harder than cast iron or steel, you can have fun. Too bad it costs then 100k+
@@gizmoriderfulye8007 True but I also disagree because at the same time, guys in Japan in the 90's were doing highway races that had engines built to last longer at high/top speeds that most cars couldn't do factory with 3x less the power and also in 2x less the time to keep it running before it ends up running out of steam.
das sind Fortlaufende Projekte umgangssprachlich auch Fass ohne Boden genannt, sagen wir für das Geld gibt auch schöne neuwagen allerdings ohne diese Leistung....wenn du Zahlen brauchst dann stell beim Gockel eine Anfrage was dich zum beispiel ein Golf 2 16V 4Motion mit ~900PS kosten wird aber setz dich vorher hin
von meinen 300 jetzigen ps, zu meinen gewünschten 450 ps. soll ich ich jetzt schon etliche tausend zahlen. hätte gern mal ein Anhaltspunkt, wo die reise hinführt.
+Harry Popper bei einem >1000PS Wagen kannst du, würde ich schätzen, 20 bis 25 T€ ausgeben. Nur die Teile. Fast jedes Teil des Serienmotors muss ersetzt werden. Neues Getriebe, was je nachdem, bis zu 8 oder 10T€ schon ausmachen kann. Hab mal vor Ewigkeiten nach einem Sequentiellen Getriebe geguckt. Die lagen etwa in dem Bereich. Größerer Auspuff 1T€. Je mehr du selbst machen kannst, um so billiger wird es logischerweise.
![Customer States & Mechanical Fails [Part 39]](http://i.ytimg.com/vi/bc6ux02EZw4/mqdefault.jpg)
I hope really you like & enjoy my channel.
Than´s for 100k subscriber´s
Boba Motoring
I'm not much of a fan of the Japanese imports but since its your channel I give it a thumbs up.
That thing rocks pretty good, I'll give it that.
MrTheHillfolk nñ
DeathlyHall0w 4g63t.. Pressure cast iron, built for Boost
DeathlyHall0w because BIG BAD 4G63.
Boba Motoring have guys ever built an inline 6 /straight 6?
at 1:50 you can see the turbo pipes twist downwards, and stay down
they stay that way out of respect
Fooking hell the turbo clocked itself 😰💩
Its the heat, they are expanding so they move.
Those are exhaust pipes
Yes captain O, those are indeed the turbo exhaust pipes.
I know where i'm going if i ever come into a lump of cash, Germany for a badass build.
that timing belt must be holding on for dear life
1:50
ich glaube, da hat sich was nicht nur bei mir gebogen ;D
4g63 16v 2.0 its awesome!
Even on "Low"- boost this thing produces 30 times the hp of my car...
960 / 30 = 32 ?? :D
He drives a Reliant Robin
vw beetle?^^
1296/30=43.2 = your iq
Amazing work guys. I wish I could have that or the 16V here in the states, would destroy everything in the streets and track.
Gleich haben wir die 100.000. Verdient!
jafromobile would approve on this colt.
hahahah, so fucking True!!! xD
This is insane, you guys have the nastiest builds. How do you get a gasser to hold 55psi?
I would imagine it's fully built internally.
I wonder if the block is reinforced.
Do you not know what a 4G63 is?
Do you know what an Evo is?
Evo is a car which would not work properly in a couple of weeks after tuning it
Evo owners won't admit that but they aren't that reliable as you think when you tune 'em
Other than that it's a really fun car to drive or go crazy with
Joe11Blue what does that have to do with his comment?
Und nun ab damit auf die Autobahn :D
ja mit rotem Kennzeichen :D
Greek Colt has already 8.2 in recent Drag Race so I would love to see both of them in the same race side by side now that this one is more powerful
1:47-1;53 Exhaust!!!!!!!!!!!!!!!!!!!!!!!
100.000 subs yayyyyy!!!
yes thanks 😊
ъ
:)
@@BobaMotoring wow great ! how much volumetric ratio ? it's funny , congretulation from france
C'È QUALCHE ITALIANO QUA? SE SI RISPONDA CON "YT ITALIA FA SCHIFO!"
Check out our 1991 Colt 4G63 Turbo build!
in der Videobeschreibung fehlt das T beim Colt @ Boba Motoring
I WHICH U WOULD DO IN A COLT WITH 1 269 HP A 1/4 MILE DRAG RACE AND IT WOULD B A NEW RECORD OR VERY CLOSE 2 THE OLD TIME WITH AN OLD 1 080 HP SETUP ;)
Cool, but would be gutted it was not 1300 tbfh :)
1300 HP on ECMlink??? wow
Can I put 4g63 2.0 16v engine to my Colt Mirage 1980? I'm just wondering if I can do that.
AMAZING! if ur not impressed by this 4 banger, then ur a hater! - bravo guys!
it's goood
but there is still much catching up to do...Jett racing here in Australia has run 6.4s in their 4g63 powered datsun 1200 and down to 6.57 in their 4g63 powered eclipse.
both of these were years ago too, I have not kept current with Jett Racing's progress, so the times may be lower than that.
still a fucking beast though.
4g63 the legend
strange !?!? german tuners but they tune japanesse engine !! what happened with BMW engines?? can they sustain such revolutions per minute?? i dot think so !!
Kann ich bei euch ein Praktikum machen als Kfz Mechatroniker 😊😊😂😂😂Muss sogar echt eins machen aber hab kein Platz bekommen deswegen schau ich mal nach ne Platz in den Pfingstferien
Legend!! 👍
Do you guys hire Mechanical Engineers? :-)
Good old 4g63!
Crazy power! Damn. I'm hoping to see this thing do some passes. Wow.
Can i ask about the song? Do not forget the vampire! :D
Jetzt braucht ihr nur noch einen TÜV Prüfer der euch das abnimmt
Brauchen sie nicht.
der gleiche wie beim Golf
Bis vor kurzem hatte der Wagen ja noch Straßenzulassung (und da war er auch schon bei über 1.000 PS - wobei die logischerweise beim eingetragenen Ladedruck nicht anliegen).
Einfach nur geil :"D
tenho um colt Mitsubishi 1.6 16v queria saber si é bom turbinar ele ?????
How in the world did you get the ignition system to work at that kind of power on E85 with what looks like a stock coil, and Ecmlink. I know that's no small feat.
I wonder if ceramic coating all your turbo hot parts and wrapping the manifold in heat wrap would being any improvements
This must be the highest horsepower colt around? I wonder if it can beat the RUclips world records of the Colts videos
Alter ihr habt mein traumcolt hochgezogen 😍😍😍
3,8 bar ladedruck..... wahnsinnig.... aber leider geil!!!!! wann ist eigentlich die GrenzeBzw das Max an boost erreicht, wieviel bar ladedruck geht da eigentliche, noch Luft nach oben?
How much would this cost to build and tune and everything?
Wüsste mal gerne wie sich das anfühlt damit zu beschleunigen :)
Gute Arbeit
Is that stock ignition that you guys are running on that motor ? Would love to know thanks
WTF !
Put turbo in to make faster
WankelGT Likes This
It already has a turbo
yeah no shit
Ok caveman guy
how is the colt now??
Do u what to sell your car?
😱😱😱😱😱
turbo ..? dimenson , naime ..?
😊👍👍👍
SICK AS FUCK
Please keep going
The best of BEAST.... 💥💪🏿💪🏿
what do they really change? the pressure of what?
nice exaust bends on 2nd and third pull is that heat expansion?
You are the best in the world...HI FROM KOSOVA....2016
up
Seriously, I love you guys. But why not use 2 turbos? No engine can handle 3.9bar turbo for long. Thats just stupid. BMW 1.5 liter engines produced 1500hp with 5+bar, and turbo was DONE after 5 kilometers (Formula 1). That said, I love you kick Dragtimesinfo channel guys like they were little whores...Please make more videos you magnificent bastards!
that was the 80s buddy...turbo s evolved alot since these days
But physics are not matey. But you right ofc. If you make engine block with something harder than cast iron or steel, you can have fun. Too bad it costs then 100k+
Interesting, I didn't know F1 races were finished after 5kms back in the 80s.
@@gizmoriderfulye8007 True but I also disagree because at the same time, guys in Japan in the 90's were doing highway races that had engines built to last longer at high/top speeds that most cars couldn't do factory with 3x less the power and also in 2x less the time to keep it running before it ends up running out of steam.
congratz on 100k subs bro
All your projects E85?
Warte ihr seid Deutsch?
I jizzed my pants many times
Ihr seid so hochgradig gestört! :D ♡4G63
assurdo 😱😱😱😱
Can't wait to see this thing drive
Von wo bezieht ihr denn das E85? (Komme auch aus PB)
tanke -.-
+Ikito Husky Achso ich dachte das wächst am Baum
NoKappaFeelsBadMan Wer solch eine dumme Frage stellt bekommt auch ne dumme Antwort.
+Ikito Husky Was ein sinnlose Diskussion
wahrscheinlich mischen die das selber an ,kenne keine tanke die das nach der steuererhöhung noch anbietet (zumindest im frankfurt)
wie teuer ist das alles zusammen?
!
what compression ratio?
excellent boss
parabens pelo trabalho!!! very Good
New video!!!
cant wait for the drag videos :D
well done boba
Song name?
cool
omg
MONSTER
nice build
Is right lads :D
What is the Name off the tuner that tuned the ecmlink ecu?
Matthias Boldt, the owner off this car ;)
can u try to make a vw golf 3 v16 vampire? :P that will be cool!!!!!!
you know these guys are friends with them.
no as far as i know these guys are them
crazy
i hope it wont explodeon you
*explode
geez how hard can it be?
what pistons? it cant be stock right?
Most likely aluminum forged
Leistung satt, mich würde mal interessieren was euch der Umbau bislang gekostet hat. ... Zahlen müssen auf den Tisch.
das sind Fortlaufende Projekte umgangssprachlich auch Fass ohne Boden genannt, sagen wir für das Geld gibt auch schöne neuwagen allerdings ohne diese Leistung....wenn du Zahlen brauchst dann stell beim Gockel eine Anfrage was dich zum beispiel ein Golf 2 16V 4Motion mit ~900PS kosten wird aber setz dich vorher hin
drei fuffzisch
von meinen 300 jetzigen ps, zu meinen gewünschten 450 ps. soll ich ich jetzt schon etliche tausend zahlen. hätte gern mal ein Anhaltspunkt, wo die reise hinführt.
+Harry Popper bei einem >1000PS Wagen kannst du, würde ich schätzen, 20 bis 25 T€ ausgeben. Nur die Teile. Fast jedes Teil des Serienmotors muss ersetzt werden. Neues Getriebe, was je nachdem, bis zu 8 oder 10T€ schon ausmachen kann. Hab mal vor Ewigkeiten nach einem Sequentiellen Getriebe geguckt. Die lagen etwa in dem Bereich. Größerer Auspuff 1T€. Je mehr du selbst machen kannst, um so billiger wird es logischerweise.
krank !
Hat das auch TÜV?
amazing..
Wow!!!
Wahnsinn
like what sort of mods are done for this, like 960hp on low boost?
hihhihyy
real power of 4g63 dude, if you tune in right this is what you got with 4g63
TTT an Wochenenden
@1:50 you can see how exhaust is moved / deformed ?
Moved. Most likely it wasn't bolted on strong enough, no big deal :)
Its called expansion. When it gets hot, the metal expands so it moves. If it didn't, it would crack.
happy dyno or what
lol the downpipe going down
Question time, that tiny pipe next to the exhaust.. for is that?
Excessive pressure dump pipe.
maybe a screamer pipe?
Dumme frage: hat das teil ne straßenzulassung?
Ja Dumme frage, und nein
the title of this music, please.
OH MY GOD bwahahaha
simon simon what?
Darude Sandstorm
but 100hp stock
wut
stärkster 4 Zylinder in Deutschland. 4g63.
Wird der stärkste 6 Zylinder wahrscheinlich ein 2jz sein? Oder ein vq38?
nein ein S38B36 verbaut in einem e30
great numbers, but why does it drop off so much at the end?
mosy likely over boost protection
because the pressure go down
turbo is done before max rpm
Yeah turbo is probably maxing out in terms of flow but at these power levels that drop off means nothing lol. 1300hp from a 4 banger is astonishing
Anti lag, will clear that right up.
clear what up? Dyno runs aren't done with anti lag.
what ever
deth kon lol
Wie bei 2:49 der Notaus hallo sagt :D:D
Ia this car registered or is it not?
Not any more
In Germany you cant registrate those Cars
+Dieser Moment, wenn neither in sweden, but do they drive it illegaly?
Abdullah Mohamademin just with red number plates, but red number plates only can get companys
***** manche Tüv Prüfer sind anders als andere aber die Chance ist gering diesen Wagen anzumelden
Kommt demnächst ein Video von dem Audi S3 8l 1.8t ?
wie immer gutes Video
This turbocharger is Chinese?
Was für ein Motoröl fährt man mit dieser Leistung?