The piece where the eye is for me was stuck as well. I was able to solve by sliding each side tab by one position, and wiggling the top tab to see if it still hit that side tab in that position. I would know it was passing through when the side tab I was working on stayed still as I wiggled the top tab. When I found the position that let it stay still, I knew the top tab was passing through it and I moved on to the next side tab.
I'm stuck... I have the code from the eye and the puzzle piece with the symbols popped out the front but I have no idea what to do with that code and puzzle piece information? Oh haha, nevermind I confused the last step with the first step.. lol The first thing I did was remove the magnet. haha I just used a lock picking method for simple locks like this.
You know, I really enjoyed the Davinci 3.0 Puzzle Box I did and the Combi-Lock a lot! There are a few more I have done off camera from iDventure Games like the Davy Jones Locker box that was very tough but fun.
Hello! So the best idea I have, if we are talking about the same thing, is that when you put the long key back in, you must put the key, grove side downwards. Additionally, make sure the left big dial is clear of that hole and you have to ensure that the same symbols are still aligned the right way/sequence. Hopefully this helps you! Let me know!
Hi There! Great question. On the front of the puzzle box you should see an eye with a small round window. Behind that, there is actually a square box floating around behind it. On that block behind the eye, there are 2 separate lines of random numbers/symbols. Once you align it properly with the eye hole by carefully move it around, you should have a set of two lines of code words. But now you have to translate it by using the big dials. By turning the big dial on the right of box, align each number/symbol that you got from the eye part, one by one with the window, and look at the other side, which will give you a corresponding letter. Keep doing that for each of the number/symbols and that will give you the clues/names for 4 symbols you need to align on the back of the box for the next step. Hope this helps and Good Luck!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Nice! Recently solved this one. Never tried a puzzle like this before.
I’m a bit perplexed by the logic that you used to solve the puzzle. It appeared as though you were just guessing at what to do.
The piece where the eye is for me was stuck as well. I was able to solve by sliding each side tab by one position, and wiggling the top tab to see if it still hit that side tab in that position. I would know it was passing through when the side tab I was working on stayed still as I wiggled the top tab. When I found the position that let it stay still, I knew the top tab was passing through it and I moved on to the next side tab.
Great job!!
I'm stuck...
I have the code from the eye and the puzzle piece with the symbols popped out the front but I have no idea what to do with that code and puzzle piece information?
Oh haha, nevermind I confused the last step with the first step.. lol
The first thing I did was remove the magnet. haha I just used a lock picking method for simple locks like this.
Which of the puzzles have been your favorite so far?
You know, I really enjoyed the Davinci 3.0 Puzzle Box I did and the Combi-Lock a lot! There are a few more I have done off camera from iDventure Games like the Davy Jones Locker box that was very tough but fun.
Me: hey Schrödinger where your cat vanished?
Schrödinger: he is fine, "probably".
Excellent puzzle. Well solved . Very complicated and too many codes. Great job 👏 👍 👌
Je n'arrive pas a la reconstruire. La clefs qui se place en dessous de la manivelle de symbole ne tien pas. Pouvez vous m'expliquer pourquoi ?
Hello! So the best idea I have, if we are talking about the same thing, is that when you put the long key back in, you must put the key, grove side downwards. Additionally, make sure the left big dial is clear of that hole and you have to ensure that the same symbols are still aligned the right way/sequence. Hopefully this helps you! Let me know!
I don't understand what you counted and how you got the numbers around the 7:30 mark. Could you explain?
Hi There! Great question. On the front of the puzzle box you should see an eye with a small round window. Behind that, there is actually a square box floating around behind it. On that block behind the eye, there are 2 separate lines of random numbers/symbols. Once you align it properly with the eye hole by carefully move it around, you should have a set of two lines of code words. But now you have to translate it by using the big dials. By turning the big dial on the right of box, align each number/symbol that you got from the eye part, one by one with the window, and look at the other side, which will give you a corresponding letter. Keep doing that for each of the number/symbols and that will give you the clues/names for 4 symbols you need to align on the back of the box for the next step. Hope this helps and Good Luck!
What was the first combination on the dials?
I couldnt see the symbols when you turned the gears. That was when it was to hard for me to follow you
Huh. Mine didn't have any symbols show up in the eye. Broken?
Different puzzle?
Nope same happened to me, it got stuck on the side, was a real bummer
Nice j9b
Starring Lamp Magnet
there is another step
Hey There! What step are you referring to?
Hm, I did it in 1 Sep...Just started where START was printed on the right side and choose code, it was open...10min