The part where you brute forced it - check out the orientation of the four symbols at the end of the row (cut into the acrylic). And then look at the wooden engraved symbols on that face of the die around the wheels: you got the solution correct, but the markings are rotated 45 degrees, so you need to orient them diagonally instead of horizontally/vertically!
I feel like he basically brute forced the whole puzzle box from start to end. From the sliders at the very beginning that he couldn't figure out the little map piece all the way to the very obvious spin move to finish. I guess the mat that he was working on wasn't allowing it to spin smoothly or something.
It's crazy to go back and watch your first vids and see how much you've grown and how amazing your editing and shots have become. You definitely deserve way more recognition for how amazing you are in this community.
Even when two great puzzlers Chris Ramsey and Mr Puzzel, have the same puzzle to solve, it's amazing to watch their technique and their thought process to solve it. It would be amazing if you could both team up to do an escape room together.
Hey Chris! Love your videos but at 13:00, its not broken. You are missing the Key carved into the plastic at the end of the knobs for the bearing in the row. By the cogs, carved in the wood, shows the orientation of the shapes are like a compass to depict the orientation of the actual knobs.
@@scrogfpv7443 Nah man not even close. Definitely disagree there. Their styles at approach and everything are just about complete opposites so I could understand how some think he is and some think Chris is but at the same time Chris has solved legendary puzzles so I think he's a bit ahead of Mr puzzle. We all have our own opinion though!
For the last part of the puzzle you're supposed to grab the lid lift the box and then spin the whole thing while you're holding it. The centrifugal force will push the balls out of the way, and when you stop the spin it'll turn the lid. That's why the arrows were facing different directions.
For me, the vert first thing to rotate was actually cut differently, with the wood part just large enough to block the very first large socket to align with the gap the string ball is from. So I was physically unable to do directly like in the video. I though it was a fatal misconception/misproduction, but then I realised it was possible to work around by sliding the ball further in the corridors and the smaller socket, to finally being able to put the ball back on the same correct track! So that's cool we can have slighty different ways to finish this, maybe for the labyrinth too. I also managed to reset it all the way, it's just a bit tricky when the 6 balls go back to lock mode without the door, so we have to try turn it open again without the handle, but nothing is impossible. So yeah, it works, never give up. 😀 But you still barely understood the enigmas and bruteforced, in contrary of Mr. Puzzle. 😅
8:10 the pins need to line up with the holes from the little piece. The arrow needs to face left( as you were holding it. Now there are a couple more holes which indicate directions in which the pins need to be moved and numbers indicating by how much
The top was definitely supposed to be a spin move, you were trying to spin it on the felt Mat which was stopping it too abruptly, try it again on the hard table surface, it will slide much easier.
I backed the last Kickstarter for the Captain Nemo themed box last year. I also picked up their two earlier boxes as well. Was not disappointed at all. The puzzles are very well thought out, the solutions make sense, and everything you need to know is built in. The pieces can be a bit fiddly, sometimes you have to wiggle them a tiny bit, but for the most part they move easily and do not require any force. These boxes are very fun to solve. I didn't hesitate for a minute when they launched the new campaign. If you're interested at all in getting them, you will be very happy if you do.
@13:28 Here are the steps: Step one: There's a row of smaller dials that prevent a ball from moving, turning them reveals the ball stoppers all have a flat area that allows the ball to move once they are in this position. Step Two: Each of the smaller dials have a distinct shape that corresponds to one of the larger dials with the same shape, noting the direction each small dial is in, position each larger dial to face the same direction. Step Three. The main ball in the track still cannot pass to the next part of the puzzle, further inspection reveals that each large dial also has markings of a Square, Circle, Triangle and Cross. Step Four: Additionally at the end of the small dials is the same shapes cut into the plexiglass, arranged like a D-Pad. Step Five: Following the guide of the D-Pad reveals that each of the larger dials need to be adjusted so they line up with a shape, the direction of the small dials are actually indicators of this. Step Six: With these correctly aligned the main ball can now pass through to the next puzzle
Chris thank you for the incredible puzzles you have brought to my attention..... before stumbling across your videos I never really cared about puzzles and now I live and breathe mine bending puzzles and I have you solely to thank for it so keep doing what you're doing man love ya Joe N.
Recently found your channel and I find your videos very entertaining. If someone told me I'd spend 3 hours in one day watching a guy solve puzzles I never would of believed it but I can watch these all day. Your mind is amazing. I couldn't even begin to solve these
For years, Chris has solved puzzles by spinning them (even when they tell him not to), but the time he had to spin it (on the last part), he forgot his roots.
Another great puzzle solve. Someone may have commented this already, but I think the little wooden overlay had an arrow on it to signify the top of the front side. From there, you had to move the sliders vertically to line up with some kind of pattern in that overlay.
When I first started watching, you pushing to get 50k subs. You’ve really gotten me through some tough times over the years, and I thank you for brightening my days.
I am glad that you have the patience to dove these puzzles. I truly enjoy watching you. However, to be fair and honest, I would broken out the sludge hammer a long time ago.
The numbers one I figured out like picking a lock, slight pressure on the slide then move the sliders and it will unlock. You get binding points and get find the correct path.
i was literally screaming at the computer for you to try turning the box upside down and spin the lid. I was thinking possible the plexiglass cover may have been sloped to set the balls
I'm kind of shocked you didn't figure out the second puzzle on the cube the right way. That tool did fit another way, and you had it facing the right way at one point, but you didn't move the notches to where they'd fit. :-P However, where you were able to do it without the help of the tool, I absolutely needed it xD *golf clap* :) As for the puzzle after it with the notch orientation, you figured more of that out than I did and still brute forced it like I did xD I looked it up, and the solution to it actually makes a lot of sense. I was trying to figure out the key on the bottom right corner more than paying attention to the notch orientation and how it went with it. So yeah...it wasn't broken for you or me...we just both got the solution the wrong way xD Spinning it at the end turned out to be easier than I thought, too...but I got stuck on the same part you did about it because the beads kept rolling back in. You had to hold the middle while you spun the box to make all the beads stay out and unlock it. And if you went to the website it gave you, it would ask how many circles, which is what the top spinner was for ;)
With the centrifugal force part of the puzzle you were solving would it have been easier to put the puzzle on a lazy Suzan or something else that has the ability to spin to get the beads in place
I like looking at your hand movements. Your tattoos are cryptic and have meaning. Not too in depth of magical meaning but it means something to you. Love your videos.
I'll be checking back once mine arrives and I've beaten it. I have one of every cluebox iDventure makes now thanks to you... And I'm starting to design my own... ;)
I said I'd be back, time to beat was 62 minutes. Now I can finally watch Chris solve it 09:10 tsk tsk, bruteforcing your way through that, you were on the right track and mentioned the solution, you just didnt follow through. Spoiler below. The last puzzle IS a spin, its just that the box is kinda awkward. I held the star and used it to flick the cube. My spinner was WAY cheaper and simpler than yours... but like yours, no link to the puzzle hall of fame page, which I found odd. Camelot has one though =/
The opposite arrows on the top of the lid - Can you grab the puzzle by the hatch handle and rapidly spin it clockwise once then anticlockwise once, the first moving the balls out to the edges and then the return rotation to unscrew the lid?
The piece you pull out at 7:10 mine is jammed and won't come out. Thought I was doing something wrong and worked on it for hours, but it won't come out.
Your videos are always a joy to watch, no matter the content, they contain your wonderful personality, and that is why I watch...good people are good to see. 😁✌️♥️🌎👍
ive built some 3d puzzles made like that i think from woodgears or something like that which are awesome. do you know of any like it that are puzzle boxes? or if this one can be bought dissassembled? that would be awesome
(I'm Tavis's wife).. my husband got me this box for my bday..I got it done this decided to I wanted to watch Chris do it because I have no idea how I unlocked the side with the numbers and arrows...but.. I literally done the same thing Chris did. I have no idea what or how the answer to getting that slide unlocked.. I ended up with my pegs in a different spot then Chris did... but I enjoyed it anyway! 😊
Been a fan for a long time. I love the fact your vids are so chill and feel relaxing. You help us forget all the crazy shit going on the the world! Keep up the good work!
Hey! I think I figured out the part with the gears. I think the symbols with shapes on the right are like a compass and the origination of the pieces needs to match those orientations save not following the guide on the right but the other shapes scattered along the surface. :)
Oh wow thanks for sharing the Kickstarter link. I've wanted a puzzle box like others you've done, but they were way out of my price range. Through the Kickstarter I got two for under $100. 😁
Hay brother, I’ve been a fan for years and years. Always loved your puzzle solvin ways, and your stoner lovin sensual sounds🤙🤘 Any how thought was this one reminds me of “jewel” 90s puzzle pc game.. u member
The solution to the final open was to grab it lift and give it a quick twist clockwise. It would make the balls falls to the outside and the leftover momentum would have twisted it open.
« This part here I figured out but it didn’t work » you’re very confident but you just miss all the clues. They didn't put symbols just to look pretty.
Another beautiful, banging intro 🤟. As for the puzzle? WOW - the amount of time, effort and skill needed to make this puzzle is 🤯. Excellent puzzle and solve man 👊✌️
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
The part where you brute forced it - check out the orientation of the four symbols at the end of the row (cut into the acrylic). And then look at the wooden engraved symbols on that face of the die around the wheels: you got the solution correct, but the markings are rotated 45 degrees, so you need to orient them diagonally instead of horizontally/vertically!
That was driving me crazy how he missed that.
I swear man im like the smartest puzzle solver i know couldn't figure out how to follow the lines to the arrows with the blocks
Wow I didn’t even notice that. Good eye!
I feel like he basically brute forced the whole puzzle box from start to end. From the sliders at the very beginning that he couldn't figure out the little map piece all the way to the very obvious spin move to finish. I guess the mat that he was working on wasn't allowing it to spin smoothly or something.
@@FirstLast-gw5mg I think it's more a hold the top and counter spin.
It's crazy to go back and watch your first vids and see how much you've grown and how amazing your editing and shots have become. You definitely deserve way more recognition for how amazing you are in this community.
I do this from time to time and it’s incredible to see his growth 🙏🏽
I completely agree.
I absolutely 100% agree
1000000000000000000% true
Even when two great puzzlers Chris Ramsey and Mr Puzzel, have the same puzzle to solve, it's amazing to watch their technique and their thought process to solve it. It would be amazing if you could both team up to do an escape room together.
Ohhhhh! That is why I seemed to have seen this puzzle even though Chris said that it was an exclusive one lol!
Hey Chris! Love your videos but at 13:00, its not broken. You are missing the Key carved into the plastic at the end of the knobs for the bearing in the row. By the cogs, carved in the wood, shows the orientation of the shapes are like a compass to depict the orientation of the actual knobs.
I spotted that too…Circle / Triangle / Square / Plus
I was going to mention this too. I noticed it at the last second lol
Saw that and oriented it. It's stuck in the middle.
I watched Mr Puzzle solve this same exact puzzle recently. It is so fun to watch two completely different people approach the same task.
Mr puzzles is so much better
@@scrogfpv7443 Nah man not even close. Definitely disagree there. Their styles at approach and everything are just about complete opposites so I could understand how some think he is and some think Chris is but at the same time Chris has solved legendary puzzles so I think he's a bit ahead of Mr puzzle. We all have our own opinion though!
Those intro's alone already deserve a multitude of likes. Theyre amazing!
For the last part of the puzzle you're supposed to grab the lid lift the box and then spin the whole thing while you're holding it. The centrifugal force will push the balls out of the way, and when you stop the spin it'll turn the lid. That's why the arrows were facing different directions.
Mr. Puzzle: I can solve this part. I must be missing something.
Chris Ramsay: I can solve this part. The puzzle has to be broken.
For me, the vert first thing to rotate was actually cut differently, with the wood part just large enough to block the very first large socket to align with the gap the string ball is from. So I was physically unable to do directly like in the video.
I though it was a fatal misconception/misproduction, but then I realised it was possible to work around by sliding the ball further in the corridors and the smaller socket, to finally being able to put the ball back on the same correct track!
So that's cool we can have slighty different ways to finish this, maybe for the labyrinth too. I also managed to reset it all the way, it's just a bit tricky when the 6 balls go back to lock mode without the door, so we have to try turn it open again without the handle, but nothing is impossible. So yeah, it works, never give up. 😀
But you still barely understood the enigmas and bruteforced, in contrary of Mr. Puzzle. 😅
8:10 the pins need to line up with the holes from the little piece. The arrow needs to face left( as you were holding it. Now there are a couple more holes which indicate directions in which the pins need to be moved and numbers indicating by how much
I got to exactly that point but could not do the next moves to get the piece to slide. I had to "brute force it" too
The top was definitely supposed to be a spin move, you were trying to spin it on the felt Mat which was stopping it too abruptly, try it again on the hard table surface, it will slide much easier.
He pushed the close up pad away before he spins. He's spinning it on the wooden table surface.
@@lanceseaman88 go back and look again, he sure did not.
@@jacobogden6710 There's the top of the puzzle and then there's the spinning top. you're both correct.
I backed the last Kickstarter for the Captain Nemo themed box last year. I also picked up their two earlier boxes as well. Was not disappointed at all. The puzzles are very well thought out, the solutions make sense, and everything you need to know is built in. The pieces can be a bit fiddly, sometimes you have to wiggle them a tiny bit, but for the most part they move easily and do not require any force. These boxes are very fun to solve. I didn't hesitate for a minute when they launched the new campaign. If you're interested at all in getting them, you will be very happy if you do.
Let's goooo! You're my top 5 channels Chris👍🏻💯🔥
@13:28
Here are the steps:
Step one: There's a row of smaller dials that prevent a ball from moving, turning them reveals the ball stoppers all have a flat area that allows the ball to move once they are in this position.
Step Two: Each of the smaller dials have a distinct shape that corresponds to one of the larger dials with the same shape, noting the direction each small dial is in, position each larger dial to face the same direction.
Step Three. The main ball in the track still cannot pass to the next part of the puzzle, further inspection reveals that each large dial also has markings of a Square, Circle, Triangle and Cross.
Step Four: Additionally at the end of the small dials is the same shapes cut into the plexiglass, arranged like a D-Pad.
Step Five: Following the guide of the D-Pad reveals that each of the larger dials need to be adjusted so they line up with a shape, the direction of the small dials are actually indicators of this.
Step Six: With these correctly aligned the main ball can now pass through to the next puzzle
Chris thank you for the incredible puzzles you have brought to my attention..... before stumbling across your videos I never really cared about puzzles and now I live and breathe mine bending puzzles and I have you solely to thank for it so keep doing what you're doing man love ya
Joe N.
Me screaming at my phone 17:10 "spin the puzzle un the table, ON THE TABLEEEEEE!!!!!!!"
Recently found your channel and I find your videos very entertaining. If someone told me I'd spend 3 hours in one day watching a guy solve puzzles I never would of believed it but I can watch these all day. Your mind is amazing. I couldn't even begin to solve these
For years, Chris has solved puzzles by spinning them (even when they tell him not to), but the time he had to spin it (on the last part), he forgot his roots.
Right on, hahaha. To be fair it was hard to spin it for me but after 5 or 6 spins I got it to work.
Chris, you by far have one of the best YT channels, concept/content‼️
👏🏽 😀 👍🏽 💙 🙌🏾 👌🏾
Just want to let you know I’ve been watching for years and appreciate your passion for your contact
I just got this puzzle!! I got both of the puzzle boxes, and I loved them! Both worth it!
Saw an ad for 1stshop so I went to buy a hoodie. Waiting foe the XLs to come in. In the meantime I will watch Chris solve puzzles.
Another great puzzle solve. Someone may have commented this already, but I think the little wooden overlay had an arrow on it to signify the top of the front side. From there, you had to move the sliders vertically to line up with some kind of pattern in that overlay.
I think this is the best puzzle I have seen yet.
I love the precise ending !
When I first started watching, you pushing to get 50k subs. You’ve really gotten me through some tough times over the years, and I thank you for brightening my days.
Wow I’ve never seen a puzzle box this intricate but this looks amazing and you did a great job (even if you got frustrated for a sec 😅)
13:22 the things you turn must be on the square triangle cirkle of plus sign like the little nops do horizontal of vertical..
The intricacies of this puzzle is insane!
I am glad that you have the patience to dove these puzzles. I truly enjoy watching you. However, to be fair and honest, I would broken out the sludge hammer a long time ago.
Beautiful puzzle and just now bought 2 of em
Loved that opening sequence good job on that!
100% Never thought I'd love watching things like this be solved but I do & the art and prep he puts in to the intro. Big Fan.
Such a Dexter inspired intro! Might go rewatch that show. Haha
Never stop Ramsay. Your puzzle sovles are my asmr. :)
I appreciate the increase in videos across here and the tv channel - this is my chill down before bed activity. So relaxing - thank you and good video
Watching this at 4am and at 0:27 I thought that was fingers at the bottom right lol freaked me out
8:00 " There is more 𝓬𝓤𝐦"
-
Chris Ramsay (2022)
You've opened the box, and we came!!!!
The numbers one I figured out like picking a lock, slight pressure on the slide then move the sliders and it will unlock. You get binding points and get find the correct path.
i was literally screaming at the computer for you to try turning the box upside down and spin the lid. I was thinking possible the plexiglass cover may have been sloped to set the balls
Thank you for being you, and always keeping it fresh. Thank you.
Best regards.
Arthur Rogers•
Beautiful puzzle 😮💕💕
Had to watch Mr.Puzzles video to see how to actually solve the sides he brute forced but wow the full build is amazing
The thing you take out at 19:40 min is a toy, idk the English name of it but in Spanish is called "trompo"
...this puzzle has balls.
...I'll see myself out.
yayyy, a new puzzle!! lets goooo!!!!
one of the best Puzzles ever !!
That looks like a blast! Super gorgeous too!
I'm kind of shocked you didn't figure out the second puzzle on the cube the right way. That tool did fit another way, and you had it facing the right way at one point, but you didn't move the notches to where they'd fit. :-P However, where you were able to do it without the help of the tool, I absolutely needed it xD *golf clap* :) As for the puzzle after it with the notch orientation, you figured more of that out than I did and still brute forced it like I did xD I looked it up, and the solution to it actually makes a lot of sense. I was trying to figure out the key on the bottom right corner more than paying attention to the notch orientation and how it went with it. So yeah...it wasn't broken for you or me...we just both got the solution the wrong way xD Spinning it at the end turned out to be easier than I thought, too...but I got stuck on the same part you did about it because the beads kept rolling back in. You had to hold the middle while you spun the box to make all the beads stay out and unlock it. And if you went to the website it gave you, it would ask how many circles, which is what the top spinner was for ;)
With the centrifugal force part of the puzzle you were solving would it have been easier to put the puzzle on a lazy Suzan or something else that has the ability to spin to get the beads in place
*A brain-scrambling cube puzzle*
+
*Smooth jazz in the background*
=
*Good quality entertainment* ❤
I like looking at your hand movements. Your tattoos are cryptic and have meaning. Not too in depth of magical meaning but it means something to you. Love your videos.
I love your videos. Makes me want to try puzzles
I'll be checking back once mine arrives and I've beaten it.
I have one of every cluebox iDventure makes now thanks to you...
And I'm starting to design my own... ;)
I said I'd be back, time to beat was 62 minutes. Now I can finally watch Chris solve it
09:10 tsk tsk, bruteforcing your way through that, you were on the right track and mentioned the solution, you just didnt follow through.
Spoiler below.
The last puzzle IS a spin, its just that the box is kinda awkward. I held the star and used it to flick the cube. My spinner was WAY cheaper and simpler than yours... but like yours, no link to the puzzle hall of fame page, which I found odd. Camelot has one though =/
Ah, it DOES have one, and a sneaky password once you get there ;)
The opposite arrows on the top of the lid - Can you grab the puzzle by the hatch handle and rapidly spin it clockwise once then anticlockwise once, the first moving the balls out to the edges and then the return rotation to unscrew the lid?
These messages are scams........ They are very common on RUclips now.
The piece you pull out at 7:10 mine is jammed and won't come out. Thought I was doing something wrong and worked on it for hours, but it won't come out.
The intro gave me some vibes, and sounds really similar to a series I have watched in the past, but I am not sure which one. Maybe Dexter?
this is actually a really cool puzzle for something so small, was not expecting it
Such a cool puzzle. Great video!
Your Videos are soo extremly relaxing. Thank you!!!
Your videos are always a joy to watch, no matter the content, they contain your wonderful personality, and that is why I watch...good people are good to see. 😁✌️♥️🌎👍
Just saw your article in Inked magazine! So awesome, man! Been following you since I saw the phone puzzle a few years ago.
Great video today, loved the Hellraiser box
Would you have been able to spin the box and have centripetal force move the ball bearings outward?
I did stuck by the mapped riddle two. But on the 3. turning riddle, you had to orientate proper to the symbols.
Have you thought about a chest cam on top of a over head for the parts where you have to tilt the puzzle?
I'll buy them for the burnt wood smell alone :D
Enjoyed watching this video, but I have to say that MrPuzzle has a solve video of this puzzle worth watching.
ive built some 3d puzzles made like that i think from woodgears or something like that which are awesome. do you know of any like it that are puzzle boxes? or if this one can be bought dissassembled? that would be awesome
(I'm Tavis's wife).. my husband got me this box for my bday..I got it done this decided to I wanted to watch Chris do it because I have no idea how I unlocked the side with the numbers and arrows...but.. I literally done the same thing Chris did. I have no idea what or how the answer to getting that slide unlocked.. I ended up with my pegs in a different spot then Chris did... but I enjoyed it anyway! 😊
What a great puzzle. Did you find out what that piece was for?
As always Chris the intros are legendary👏🏼
Been a fan for a long time. I love the fact your vids are so chill and feel relaxing. You help us forget all the crazy shit going on the the world! Keep up the good work!
Hey! I think I figured out the part with the gears. I think the symbols with shapes on the right are like a compass and the origination of the pieces needs to match those orientations save not following the guide on the right but the other shapes scattered along the surface. :)
Oh wow thanks for sharing the Kickstarter link. I've wanted a puzzle box like others you've done, but they were way out of my price range. Through the Kickstarter I got two for under $100. 😁
Gonna get myself these soon!
At 11:30 I was screaming, “ look at the diagram next to the ball! It tells you the direction - shape!
Me screaming at my screen telling you to take the box off the red thing and spin it on the table to get the berrings to the side 😅😅😂😂
I think the turne knobs should be lined up to symbols on the end of the groove instead of directions.
This box looks very creative, I'm looking forward for the second one!
Oh this looks like fun!
5:40 the numbers Mason what do they mean
Very intricate puzzle, looks great👍love your videos ❤️🔥
Just watched Mr Puzzle solve it. While you solved it your way I don’t think it was the intended solution. Have a look at his attempt.
Can't watch it as i backed it on KS. Will have a look when i solve it myself 😁
Hay brother, I’ve been a fan for years and years. Always loved your puzzle solvin ways, and your stoner lovin sensual sounds🤙🤘 Any how thought was this one reminds me of “jewel” 90s puzzle pc game.. u member
I love THIS intro!
Hot dang! That was fun to watch. Can't wait for the next one! Also can't wait for the future you puzzle!
The solution to the final open was to grab it lift and give it a quick twist clockwise. It would make the balls falls to the outside and the leftover momentum would have twisted it open.
So jealous you got this already
Man I wish I had your Job! Love the puzzle time bud
This is so cool, I wish I could solve puzzles like he could
You should check out Mr. Puzzle’s solve of this same puzzle
That was a hot dang for sure.🇨🇦🍁🤗🐘
Thought Chris was passing the puzzle for us to smell it😂
Can we all take a moment to think about the fact that he probably spends at least 5x the time making his intros than solving the puzzles themselves
Chris Ramsay is a Master Solver
« This part here I figured out but it didn’t work » you’re very confident but you just miss all the clues. They didn't put symbols just to look pretty.
These are awesome! Do they come assembled and in that acrylic case like in the video?
Another beautiful, banging intro 🤟.
As for the puzzle? WOW - the amount of time, effort and skill needed to make this puzzle is 🤯.
Excellent puzzle and solve man 👊✌️