Nice install, a few things I've done when cutting a hole in the roof, tape a trash bad or a box to the roof on the inside and it's catch all the small pieces of metal that can get inside you van and cause rust. Give Dicor 501LSW-1 Self-Leveling Lap Sealant on top of the fan, it works great.
I dont think the vapor barrier debate will ever be settled. Some say it only traps moisture, some say it's necessary to prevent moisture from getting in. Also, sick moving timelapses. What do you use to accomplish those?
I agree with you. Seems like no matter what I do with insulation I’m always wrong lol my moving time lapses are filmed with my Insta360 camera. Takes a while to edit but the clips look amazing
self adhesive bitumen stuck to the metal panel will stop moisture being near the metal work. then a moisturiser barrier will db up on that. that’s and treating any cuts you make in the metal with red oxide primer and a top coat will give any van build e longevity. I love these builds.
If you want to maintain that vapor barrier, this is a must… With your foil tape, you want to press it down… Use a roller or rounded over and smoothed scrap of wood.
Nice work. Jeeze....love the music. I'd be hard-pressed to seek it out on the dial, but man, I could listen to your videos all day! Have an awesome day and stay safe out there!
Ça a l'air tellement facile quand on te regarde travailler avec la petite musique d'ambiance qui détend , j'en ai aménagé un y a pas longtemps c'était pas la même musique . Vidéo agréable à regarder 👍
Hi Dualex my name is Raul I like your builds I saw on one of your videos you stated that your from New York I was raise in NY my self I’m thinking of doing a built any tips before I start with my built I would like to hear from you thank you…
You are so talented. I have subscribed! Maybe one day as time permits you can offer how to videos for the clueless like myself. I'd be ALL in. I would also love your support. Hope to see you in my comments soon. Much Love, Coe
Peace Peace King. New subscriber..... Your super Dope at what you do bro..... I'll be watching and learning.... I've been wanted to get off grid for a a while so I'm learning new things.... I appreciate your work.... Peace King..... 1
Hey dude in your next build, could you go for another theme. You always tend to make the same industrial, steam punk design. It would be nice to see some change, and how flexible your design skills are.
I need to get the lining in my chevy city express mini cargo van replaced, where can I get this service at?? Ive tried so many different key word searches without having any luck!!
Consider using rubber washer to permanently water proof and possibly use a bicycle innerrube for material to make a complete rubber gasket for the entire metal and possibly folded c shape for inner and outer double rubber no leak permanent seal plus no sharp edge trim excess after
Why did you not smooth down the sides of the silicone so the installation wouldn’t look so unsightly? At those bumps and whorls are going to collect dust and dirt and be hard to clean, besides! Said in love and admiration!
Recently found your channel & binged watched it like a Netflix show. The jump in overall quality is amazing to say the least. Keep it up ✊🏾
Lol this is me right now
Nice install, a few things I've done when cutting a hole in the roof, tape a trash bad or a box to the roof on the inside and it's catch all the small pieces of metal that can get inside you van and cause rust. Give Dicor 501LSW-1 Self-Leveling Lap Sealant on top of the fan, it works great.
I love your work!!! Keep it up❤️🔥
I dont think the vapor barrier debate will ever be settled. Some say it only traps moisture, some say it's necessary to prevent moisture from getting in. Also, sick moving timelapses. What do you use to accomplish those?
I agree with you. Seems like no matter what I do with insulation I’m always wrong lol my moving time lapses are filmed with my Insta360 camera. Takes a while to edit but the clips look amazing
@@Dualex_Builds hey bud. Where can I view that gutted series. I'm having a hard time finding it
self adhesive bitumen stuck to the metal panel will stop moisture being near the metal work. then a moisturiser barrier will db up on that. that’s and treating any cuts you make in the metal with red oxide primer and a top coat will give any van build e longevity. I love these builds.
If you want to maintain that vapor barrier, this is a must… With your foil tape, you want to press it down… Use a roller or rounded over and smoothed scrap of wood.
great-looks professional/do you do van customs/you do a sweet job/what state do you work out of/your skills are nice/thanks much
Loving the content. Miss seeing your builds brother. :-) Whoa
Nice work. Jeeze....love the music. I'd be hard-pressed to seek it out on the dial, but man, I could listen to your videos all day! Have an awesome day and stay safe out there!
I so enjoy your channel.. so smooth and soothing ☺️☺️👍
Always you did a great job on your van! Can't wait for the finish product. 👍
Excellent work 🎉 what's the link to the skylight? And now is it holding up as far as any cracks?
Good work. I would be so nervous cutting those roof openings. I would probably check my measurements a zillion times !
Ça a l'air tellement facile quand on te regarde travailler avec la petite musique d'ambiance qui détend , j'en ai aménagé un y a pas longtemps c'était pas la même musique .
Vidéo agréable à regarder 👍
Great Video Amazing job as always.
Hi love your work, do you do van conversion as a business, I've purchased 2021 promaster city and want a camper built out? 🙂
Where’s an update on the rv?
Your work is fantastic.
Hi Dualex my name is Raul I like your builds I saw on one of your videos you stated that your from New York I was raise in NY my self I’m thinking of doing a built any tips before I start with my built I would like to hear from you thank you…
You are amazing. How did you learn all this. I am so sorry you dad past. I wish I could give you a huge.
Early
You are AMAZING!!! I JUST SUBSCRIBED!!!
9:21 you have a center point and a hole cutter... wtf is with the bloody compass, mate? bwahahahah
Only disliking because you are taking your sweet as time uploading
Do you sell the vans that are finished? I'm interested in buying one.
i’ve been saving up and have a couple thousand to get a van, any tips on best ways and websites to find a good used van on the cheaper side?
I hope you take this build out on a few excursions before you sell it.
You’re cute. Do you have a gf? if so, does she know how to fight?
You still never showed how you wired the side cameras in one of your last videos.
I can’t wait until I can buy one of your van’s 🚐
I cant find the link to the skylight vent. Anyone know?
You are so talented. I have subscribed! Maybe one day as time permits you can offer how to videos for the clueless like myself. I'd be ALL in. I would also love your support. Hope to see you in my comments soon. Much Love, Coe
Peace Peace King.
New subscriber.....
Your super Dope at what you do bro.....
I'll be watching and learning....
I've been wanted to get off grid for a a while so I'm learning new things.... I appreciate your work....
Peace King.....
1
Do you have product links?
It a hard work ⚙🛠
But it so great 👍
Hi I never saw grommets during the solar ? Instead of scrapping the ceiling I would have got 4 way stretch because wood is cold.coming along.
Cringed when you climbed through that nasty sharp edge.
Is that a rusty roof?
Hey dude in your next build, could you go for another theme. You always tend to make the same industrial, steam punk design. It would be nice to see some change, and how flexible your design skills are.
You know hitting that button as soon as you release a video
Are you taken? 😂😳
Everyone wants him. lol
You may have learned some new skills through Skillshare , but you obviously have some great mechanical and technical skills as your work is awesome.
I need to get the lining in my chevy city express mini cargo van replaced, where can I get this service at?? Ive tried so many different key word searches without having any luck!!
Which skylight did you install?
Incredible channel, love your work and the way you approach the ‘instruction’ of your work. Looking forward to more…
Consider using rubber washer to permanently water proof and possibly use a bicycle innerrube for material to make a complete rubber gasket for the entire metal and possibly folded c shape for inner and outer double rubber no leak permanent seal plus no sharp edge trim excess after
Why did you not smooth down the sides of the silicone so the installation wouldn’t look so unsightly? At those bumps and whorls are going to collect dust and dirt and be hard to clean, besides!
Said in love and admiration!
j
do you ever plan on doing customization for private customers?
Shout out to the Puerto Rico shirt 😁 love your material keep up the good work! 🇵🇷
🙏🏾👏🏾🙏🏾👏🏾🙏🏾
this totally look like where I live in Haynesville VA digging this!!
Always enjoyable!! Vantastic!! ♥️🚐🎞
💛💛💛
What's the name of that dewalt tool that you used for cutting the holes?
🔥
You ROCK 😎
Would so love it if you could turn an rv into a tiny home for me
Wow! That is really bright with just 4 lights
I love your work and self learn talent.
Can you build a an for me? Please
i like your channel bro you like my inspiration to build a mini van like grand max car.
@Dualex5 really can I
mm yes very cool i think
Absolutely awesome 😎
Choose a cloudy ass day to do it
Such good work as always
Can you do more linear follow of projects, like your older videos
This feels detached :(
Keep up the good work.
Really love all your work
Love the new intro man.
You're so cool
Dope vid
Amazing work.
Top Notch!
Nice!!!
Looks great.
@Dualex5 FO Maggot.
Great work, and please check your email (6/11). I sent you an inquiry about a van conversion.