12V UPS for router WiFi and Camera | UTsource

👉IC chip: www.utsource.net
👉IGBT: www.utsource.n...
👉Electronic component: www.utsource.net
👉Capacitor: www.utsource.n...
👉Diode: www.utsource.n...
👉Sensors: www.utsource.n...
In today's video, I will make a 12V/5V UPS for WIFI router and security camera. It can supply 12V/1A for 5 hours or 5V/1A for 10 hours when the mains power is off. The storage time will increase if you use more battery. Here I use a 3.7V/8000mAh battery.
👉 Module UPS : www.banggood.c...
👉 Shopee: bit.ly/3tEV1cZ
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com...
Facebook group : bit.ly/Creative...
Contact: [e-mail]
Phone: [phone]
#Inverter
#UTsource

[@PhdHung]

This video has subtitles.

[@CR7n322]

Box size??

[@jeffersonsinoy2913]

Does it needs a BMS? or does the module has built-in overcharge and overdischarge protection ?

[@charliemenpedegloio3053]

Part number of the charge and boost module please?

[@pinokio514]

I understand it is not quite a UPS. Is constant power of the router from batteries and they charge constantly? UPS is always running from electricity and switches to batteries only when electricity is turned off. This is the difference. But it is still useful - if there is no electricity to connect the router to this UPS (it will be more correct to call it powerbank) and there will be the Internet. I have long wanted to do this, thank you)

[@PhdHung]

It is UPS. the power from the adapter will charge the battery and supply the load, only when the power is off, the boost circuit will work.

[@pinokio514]

@@PhdHung it's change case =). But it is better to show with a multimeter.

[@rnbeat]

ihave this board actually it's a ups bro

[@adesuyisunday4287]

Hi, you are doing great. It's a beautiful project from you. Thanks. Please do you have open source stm sinewave inverter which have so many features like : menu buttons, LCD, charging battery?, etc

[@lord0ver]

I made a UPS just like this. Do you know what it means when the green LED flashes two, three or four times?

[@gurkanaytekin7752]

Good work

[@AbidAhmed-Pranto]

i need 2 output 9v and 12v. can i get 2 output on this board ?

[@claudiocovaci6059]

Por favor dama un link para compare este charge bost module

[@hadipinghan5805]

Pada sistem BMS Input output jadi satu apakah saat PLN mati arus dari baterai terbuang ke adaptor?

[@shundhem_electrick]

amazing video

[@Bianchi77]

Creative video, thanks for sharing :)

[@aliabbas3351]

I was made 18650 lithium battery 3.7v 2200mah with three batteries ups I put charger 12v with 1A but it's battery drain so fast like 10 mints work only ??

[@rakauwais987]

Mau tanya bang, semisal batre terkuras habis, kenapa ya saat pln nyala ga bisa nyala otomatis routernya? Harus cabut tancap baru bisa. Mohon bimbingan.. 🙏

[@MikeSilanin]

What about BMS?

[@Infinity-electronic]

No need BMS

[@David_11111]

yay very cool

[@RazaSolar]

Hi Sir, I am a RUclipsr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.

[@rahuanjalraaz8647]

In se bust kiya aur out se router load and battery charge kese kaha conect karke charge kare sir?

[@cartfredo4782]

sir does it charge the battery?

[@valtersouzaribeiroribeiro9534]

Bom dia parabens muito bom

[@CR7n322]

Why u dont use a switch??

[@g7mks383]

No circuit diagram or battery BMS

[@MarinhoSolarOffGrid]

Top parabéns

[@sadayaupdate2597]

Untuk cctv knoa gk bisa ya

[@huutinhnguyen8733]

Sử dụng pin laptop ok không bạn?

[@PhdHung]

ok mà

[@rahuanjalraaz8647]

battery charge kese kare sir?

[@JAMEsAMTECHCHANNEL]

tamsak mster

[@ltd2807]

Router onu ak sate colbe??

[@ZahidAli-bo9jc]

Kia ye 9v Kay rautor ko Chala skta hai

[@forhadhossain7933]

HOW
USE 9 VOLT AND 12 VOLT ANU AND ROUTER

[@luaanfx]

Please, how to convert 110V ac to 30V dc 10A
It will be useful for an 30v power supply

[@KPNShortVideos]

Adaptors easily available. But 10A is high

[@electronic7979]

👍

[@Analyzer82]

From where did u buy that plastic box? link pls.

[@haiidol4301]

anh ơi làm mạch mppt 60a đi ạ

[@myathtwe1221]

5v.. IMOU cameraအတွက်ဘယ်လိုလုပ်ရလဲ..

[@pb11u9859]

PRICE

[@poli4926]

0.2 thôi anh

[@83Crackerman]

name of modulo

[@digital210921]

How much backup time for WiFi router?

[@PhdHung]

5-6h bro

[@michellsantossbd139]

Nice

[@mianwaleed6547]

Location

[@aayanafridi9860]

ভাই ১২ ভোল্ট এর অনুতে জদি ১২.৯৫ ভোল্ট ইনপুট দেই তাহলে কী কোন সমস্যা হবে অনুতে

[@himeltfr]

কোন সমস্যা নেই।

[@nnboknoy6118]

How many hours working ?

[@Infinity-electronic]

Depending on your battery mAh and power consuming of wifi router or CCTV

[@jazasleman2479]

Sir pleas do 120vdc to 12vdc 3amps buck converter

[@quanghoang04]

👍👍

[@tiffyck8401]

มันทำไรได้

[@aamiaudios2125]

First

[@RazaSolar]

Hi Sir, I am a RUclipsr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.

[@forhadhossain7933]

HOW
USE 9 VOLT AND 12 VOLT ANU AND ROUTER

[@tariq_9094]

Use 7809 mosfet

[@RazaSolar]

Hi Sir, I am a RUclipsr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.