HTML-код
- Опубликовано: 8 авг 2024
- Uninterruptable power sources or UPS for your Raspberry Pi, Arduino, or ESP microcontroller usually are quite expensive and also do not always work. When I found these small 2 dollar modules, I asked myself: Can we use them as a UPS? Or are they just junk and false promises? Time for a closer look!
From time to time viewers ask how they should power their projects, especially with batteries. Today we will take a look at this small module and find out if it is any good, how it compares with Power Banks, and where it fits in the “energy supply chain.”
Links:
UPS:s.click.aliexpress.com/e/ccgnehR2 or bit.ly/2RbEP1h
USB Tester: s.click.aliexpress.com/e/by2eDXAo or bit.ly/2FNp1ch
Good Li-Po Batteries: s.click.aliexpress.com/e/c5KnNc8C
Additional info: • Load Sharing for the 1...
Supporting Material and Blog Page: www.sensorsiot.org
Github: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission (of your purchases the next 24 hours) to buy new stuff for the channel
For Banggood bit.ly/2jAQEf4
For AliExpress: bit.ly/2B0yTLL
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my primary job 
Наука
I think you got the abbreviation wrong. It's Uninterruptable Power Supply.
Generally: You are right. But this module can do much more.
@@AndreasSpiess Maybe you should call it a UUPS
Mr. Spiess was clear about using the abbreviation in the title... looks APA format also.
owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/apa_abbreviations.html
Excellent details and presentation also. Thank you sir! Sure is far better (including video quality and hygiene) than the Sepic Cuk UPS kit I made:
ruclips.net/video/6jYt93OUXS/видео.html
@@AndreasSpiess he isn't "generally right" he's specifically correct. How is this "universal"? Will it power my home? My car? No, it won't. If you think capable of powering a handful of devices makes it somehow special and "universal" I've got some bad news for you, any old UPS is capable of powering anything with a kettle lead or even more if you branch from the kettle lead to a plug socket, making it a hundred times more "universal" by your measurement.
Man this is twice now ive been looking at a product on ali and you are doing a video on it. i love you for this man, cant wait to see the results of this video.
Twice is a low count :)
I am on my third dozen already...
@@youliantroyanov2941 jeeze man, thats alotta projects. just goes to show the point though, the guy with the swiss accent is on it with the DIY electronics and sensors.
Yeah, I just got mine a couple weeks ago and haven't played with it much yet.
Excellent video as usual Andreas. It always surprises me how you address challenges I've forgotten I already faced, and are able to cover them in far greater detail than I did at the time. Thank you for sharing! I look forward to hearing about your solution for the raspberry pi's extended drain, if you find one :)
The challenges remain the same ;-) We will see when the RPI stuff will come.
this is great, i really hope you do a follow up video to.....
1) build the auto-disconnect protection
2) daisy chain these together in parrellel
3) build a circuit to use existing powerbanks and treat them as UPS
love your channel
The first might become true for an RPi. I already did one in the past (similar).
Happy Sunday Mornings😁 another most excellent and worthy subject. As always I didn’t realise the depth of knowledge required to understand this, but I have received another excellent tutorial and a new understanding. I see this video has sparked some real interest in the comments. Hopefully Andreas you can probe into this subject with another video as it’s rather interesting.
Happy NY to all the 100k+ subscribers 🏴
Thank you! Maybe there will be some sort of additional video. We will see...
Thanks a lot. I've buyed following your links one shield and two batteries. I've received them now and it's time to test.
I'm a fan of your videos and admire your sense of humor. Your knowledge has been of great help for to me and my final career project about BLE beacons for monitoring pacients in healthcare centers.
Best regards from the north of Argentina!
Thank you for your nice words. I am glad my 2 cents helped you in you career!
@@AndreasSpiess Your contribution is very valuable. Thank you! See you in the next episode. Here is summer and fresh ideas are welcome.
I took a different approach on this topic, I made a small low power module that can charge a battery and power a device separately. for this I used a P channel mosfet (between boost and battery) and extra shottky diode. My module contains TP4057, smaller sot23-6 version of TP4056, some protection designed to cut off at about 3V, boost converter is MT3608 set for whatever voltage you need. When I connect usb lead, charger charges battery, mosfets disconnects boost from battery, and current flows from usb lead to boost part through a diode. As I made this to power up a DSO Shell, it's small, with everything on one side, but I think that mosfet swiching thing can be easily scaled up for higher current demands.
Post the schematic please
@@arduinosynod1571 Here it is: easyeda.com/kjur18/Li_ion_charger__boost-55ecc63cf3e34ea082e9d6b1d53dafa5
that is a much better design! you want to eliminate the number of power conversions in your circuits if possible. so the diode sends 5v directly to the loads dropping only 0.5v (could be less with a schottky) where with the power going through a TP4056 you get at most a 0.8v drop (not to mention the excessive wear on the cell when acting as a capacitor). this is always going to be a higher voltage than the battery so the diode in the mosfet will not conduct. Once usb power is gone then the mosfet will conduct the battery voltage directly to the load with very little voltage drop. I just wonder if there is a way to replace the diode with another mosfet, I think the trouble is getting it to turn on and off properly.
@@SuperBrainAK I added possible solution for this, it might work. N channel mosfet with gate with a pull down resistor tied to the source connected to a usb power, and drain connected to a boost part of the schematic. This way when there is no usb power, mosfet is turned off, and when you connect power to it, that mosfet should open and conduct without any problems. Probably.
@@kjur18 You can test one if the ideal diode modules you can get off eBay..
"Atleast for a particular time or when the sun doesn't shine"
Rhymes pretty good :)
Love your reviews!! They are very detailed and I learned a lot watching them
Thank you!
Thanks for saving me time money and frustration, I needed 3A 5V and got excited to see this module in a online store but suspicious of the aspects, so your video was really helpful
Glad I could help!
Same here. Have you found a solution? This video is 3 years old now so I wonder if there are new options available.
Great video. The correct way to deal with the issue of charging the battery whilst connected to a load is to run the Vin through a schottky diode to the boost converter bypassing the LiPo charger. The LiPo cell is then connected with P-channel mosfet to the boost converter with the gate of the mosfet also connected to Vin. This will allow the battery to be charge independently of the load but will also switch the battery into play as soon as there is no input power. It's not good practice to sap the load power off the battery charger as you highlighted.
What are the advantages for the application described here?
Andreas Spiess By drawing power for the load separately from the LiPo charger whilst charging it would overcome the issue you mention in the video where the load of say a Pi doesn’t have enough current to function properly if the battery is charging but at a almost empty state. There’s a fantastic write up by Zak Kemble blog.zakkemble.net/a-lithium-battery-charger-with-load-sharing/
Thank you for this wonderful analysis, will buy a few when i start to work on project again.
You are welcome!
At least you have confirmed my findings about the unit shutting down at around 2A on 5V. Thanks
You are welcome!
Good video/explanation, listing the basics for a micro-controller UPS. This is something I need for some future projects. Thanks!
You are welcome!
I love this video. Such a great explanation. Some of the links are not working but I can find elsewhere. Excellent.
Unfortunately I cannot keep all links op-to-date :-(
Great detailed description! Will look into using these in future projects!
Thank you!
Andreas Happy new year! THank you for the video review - I sq this in one of your previous videos - Already got it - never had time to test it! So.. its great that you did this review!
Happy new year to you, too!
Interesting video. I was looking for something like that, so you saved me a lot of time. Thank you Andreas,
You are welcome!
It's really nice to see that in the transaction history of the UPS on aliexpress the first 17 pages (of 30 total) are from today... they will have to do a lot of packaging there!
:-)) I order quite a few things from them and so far, all was ok.
Andreas, you have a large enough viewer base. Why not design a product like this but with the modifications you just mentioned, and then open source the design or contact a chinese manufacturer to create it cheaply?
That is a freaking great idea.
The Andreas brand will rule the market. I for one will be a fan for life.
Professor Spiess, also it would be great if this new product had one more USB input port or even another Micro USB input port for the solar panel. Congratulations for this great class and I hope you design this new product! Thanks!
I sold hardware in the 1980 when one computer cost at least a million. Then it was fun. Today I will no more touch hardware as a seller. Sorry. Sometimes manufacturers also watch my channel. Maybe they react themselves.
@@AndreasSpiess actually, for the most part, if you design something useful, and at least do a test or prototype run, you will find nearly exact "clones" on your usual far east marketplace sites within a few months. But I do think you should release something of more ideal design under the "Swiss Accent" brand name;
@@zerog2000 If he made a circuit and had JLCPCB or anyone else make it, I'd buy it just as support. Like other channels do t-shirts etc
Excelent found. thank you for explanation. I will buy and test for my raspberry project
Happy New Year to Guru G...As usual very informative for me...Power supplies are backbone of any system...A good power supply enhance the reliability of system...Thank you... Namaste.
This is maybe not the best. But one of the cheapest ;-)
Wow great timing, I’m in need of just such a thing! BTW I noticed a few battery bank makers are now offering charging and output at the same time.
Good to know.
This was very timely, I just had a couple of these delivered.
:-)
Thanks Andreas ! Always precise like a swiss watch !! Very thorough analysis !
You are welcome!
Thanks for testing this module's UPS capabilities! I bought 4 of these after I saw them recommended on Ralph S. Bacon's RUclips channel, for using them as UPS' on my robot.
Ralph's videos where he mentions this module:
ruclips.net/video/8fiYvnBDsDE/видео.html
ruclips.net/video/jqFl8ydUzZM/видео.html
Thank you for the links
Thank you and happy new year Andreas!
Happy new year to you, too!
Awesome video Andreas. This video was very helpful. Have an amazing Sunday, Andreas from Off Grid Sweden 🇸🇪
A little late: Thank you and have a nice evening!
@@AndreasSpiess No problem man. Have a great evening
Awesome video .. AGAIN.
Really like your stuff brother... Howdy from North Carolina...USA
Like your area. I had a customer (Syngenta) in Greensboro and still remember Kitty Hawk.
Very useful and cheap. I will put that on my list to order.
:-)
If I had a dollar for every time I successfully bent the pin of an SMD chip, I’d have 0 dollars
lmao
Even if I could I wouldn't xD
take a slice of mica, melt and put the slice of mica under the pin
My personal solution
"The sun does not always shine." That's deep man
Yes!
Nice finding, and interesting project 😄👍
Thanks for sharing 😀👍
You are welcome!
Very helpful Andreas!! Thank you from Brazil!
You are welcome!
Thanks for this video. More than I expected
Thank you!
Thanks for your amazing videos as always!
My pleasure!
WOW!! I have two of these in my junk drawer, guess I better get them out an do some testing. Thanks.
:-))
Thanks, great video! I'm running MCUs off the 5V USB-A pins, rather than the 5V rails, to utilise the switch. I'm using it as a powerbank, but this would turn off most of the load in your trickle charging scenario as well.
Thank you for sharing your exprerience.
This is the module I used for my solar backpack. Bypassed charging circuit by soldering SX01-3A solar controller output to the battery holder. Worked great this summer but now it is winter and the boost converter that is always on drains battery.
As said it always draws at least 0.3mA if you do not disable 5V
@@AndreasSpiess Yes you did.
Another very good explanation as always. Tks
Thank you!
I'd really love to see a vid about the problem you mention with the Pi battery voltage protection, I've looked into some of these ICs but not a lot of examples
amazing video! keep up the great work!
Thank you!
Very well researched video!
Thank you!
Useful and interesting, as usual !
Thank you!
Very informative..as always!..thanks Andreas :)
You are welcome!
Thanks Spiess, i have two with panel solar 5v and a lora32u4II with one18650, i send a message every hour.
I installed it 6 months ago and I have never had to change the battery. Thanks, byyyye.
Thank you for your feedback!
Really useful, thank you. I will follow the link and buy a few. I use the exact same components (less the boost converter) in some of my projects and think I would generally: 1) remove the boost converter completely and 2) remove two of the LDO regulators as I normally don't need the full Ampere. That way I see a neater board that is easily suitable for small solar projects at a price lower than I can do it by assembling the parts (4056, protection circuit and LDO reg). Thinking back to your previous comparison of these charging boards, the 4056, this was my firm favourite as all of the switch mode versions failed to pass any charge current in dull weather, where this actually does pretty well even down to 1mA. Thanks again, thumbs up. :-)
And I have ordered 5 of them so hopefully you will see a few cents from me. Thanks for the hint.
This is why I called it "universal. You can remove things if you do not need them. They are so cheap. Thank you for your support!
Having over 10h of protection time after the power was cut off is pretty good for my MCU projects. Very nice.
Thank you!
Been working with Stubblefield coils. Found that I was doing it wrong. I was running current same way and creating stationary magnet field in Stubblefield coils. Therefore not getting any extra current from emf. Using some of the coils to move the magnet fields was the solution. Electricity is as simple as galvanized rod and cooper rod in dirt. With super capacitors we don't need batteries. But need resistor to keep from frying stuff. Have a pi zero running off 3 earth battery cells and a buck/boost converter. It runs my WiFi continuously and will keep doing so till corrosion eventually kills it.
Since I'm playing with two voltages on my DIY raspad (12V for the 10 inch lcd and 5V for the rpi3), I've used 4 li-ion cells in series. Used supposedly "20A" voltage regulators each (for the lcd and rpi3). Planning to try out an XL4015 since it's rated "5A."
webslinger2011 and did you solve the challenge of charging while using?
@@JensRoland I haven't installed a bms on the battery ( waiting for it to arrive). Need to test an XL4015 on the pi. So I haven't gotten to it yet.
good idea. thought about the 18650 case as UPS but didn't get around evaluating it. thanks
You are welcome!
Thanks for the Video!
Its a really nice thing if you dont need to watch out for LowPower.
My ESP32 Modules only need 8µA while in Deepsleep. This regulators and LEDs would take to much energy.
My favorite for low power still is LiFePo.
@@AndreasSpiess Thats what im using to sometimes. Even on Li-Ion with the HT7833 you are having a good LowPower performance
Great video. As always!!!!
Glad you enjoyed it!
Thanks for the video. I also tested two of them. Bad solder joints on both. One dead after a month, and one DOA. I had to repair both, a chip lead, a fused resister, and a usb pin. Ordered months apart. In the real world an rpi cannot run off one. The battery voltage will drop over time. There just isn't enough headroom with 600mah. At least that was my experience on the two I tested. After 4 days, a fully charged lipo which started at 4.2v, was at 3.87v and dropping. So it's not reliable for an rpi without changes. And recovery isn't an option after an outage like you mentioned. For esp's though, it's potentially fine. I considered making one with two usb inputs, and switching. This would leave enough overhead to manage the charging vs discharging separately. That's the design I think I'd like to see. A real ups should switch power sources, not unreliably limit the whole thing.
One dead after a month, with current well below 1A...
Deep sleep current was not 300µA all the time.
No battery reverse polarity protection (you need to often remove it to make a full reboot).
Good idea, although a "v2" would be greatly needed ;)
I have 4 of them. None was DOA, at least :-). Maybe you change R2 as shown to increase charging current to 1A
I have two of these that I bought 6 months ago. I use them all the time but not on RPi, just on Arduinos (ESPxxx or ATmega). They are very convenient for breadboard projects and I have never had any trouble with them. The only “problem” I see is that if I change the 18650, I also need to connect the USB-in port to a power source before any power comes out the USB-out port. I have assumed this is some kind of reset mechanism. However, I don’t think I would try to use one of these in a permanent project. For that I would usually go with a board that had a battery port on board. My LoRa gateway is based on a Heltec ESP32 + OLED with an 18650 inside the box wired to the battery port on the Heltec. Most of the time the Heltec gets power from its USB port but switches over to the 18650 instantaneously if USB power goes away. When USB power comes back, it instantaneously switches back to USB power and recharges the 18650. If that doesn’t qualify as “uninterruptible” I don’t know what does.
@@AndreasSpiess yeah I was going to give that a try :) Was super informative. r1 is actually what burned up on the original one I had. So I need to replace that guy already. No clue why it did that or if it was a physical failure.... However an rpi runs pretty much all my home automation. So not starting after a long power failure, is actually worse than the power failure :) I'm working on centralizing my backup power. I've got all the parts, just not all the time to invest. :) Best wishes and thanks again. I enjoy your videos.
@@HIBAW why then not consider ol' good 12v lead battery if it is home automation and size/weight aren't an issue? Use tiny one, like 4.5AH. Controllers can be bought cheaply at firms that sell fire alarm / security hardware
I've never seen a Chinese product like this that works all that well and I have a little pile of puffed up lipo cells to show for it. I don't think it's easy to make something that works well with the cheap discrete components making up the charger->protection->regulation path. Richtek has some cheap (~50cents from taobao) parts that can do almost everything and have "power path switching" that switches the load directly to the input so it doesn't fight with the charger. Those would work well for a board like this. Aside from that there are PMIC chips that have the charger, power path and programmable DC-DC supplies for not much more that would probably would well if integrated into module with an ESP32. You'd be able to put sensors etc on their own DC-DC converters and turn them off when not needed, see the state of the battery etc.
There are some very nice chips used in tablets. However, I never saw them on a module.
@@AndreasSpiess
>There are some very nice chips used in tablets.
Exactly. Something like the AXP203 that's used in cheap chinese tablets would be good I think.
donpalmera That's how the C.H.I.P. (which is sadly no longer made) did its onboard battery charging, since it was basically a Pi competitor using cheap tablet tech. Unfortunately I'm not sure there's anything like that being made today.
@@makomk
The chip was based on an Allwinner SoC. The Allwinner SoCs are always paired with an AXP PMIC...
Allwinner make a chip with a 1.2ghz Cortex A7 and 64MB of RAM in an QFP package (hand solderable) that costs about $4. :D
Hello,
I use it to power breadboards (with red and blue lines), it fits the spacing between outputs.
Thanks for the tip! Good idea.
Awesome, thanks Andreas!
You are welcome!
Typically boost converters and LDO can have an enable input. Correct scaling of these enable inputs allows low battery voltage detection and reduction of drain current below your 60mA required for charging deep discharged battery.
You are right. But not here.
AFTER E.O.V I DIRECTLY SUBSCRIBED . BEST VIDEO AND THOROUGHLY EXPLAINED.
Welcome aboard the channel!
@@AndreasSpiess
Sir,
Lithium ion polymer 4000mah,
The charging module tp4506 with dw01 battery over discharge protection,
The booster stepup step down circuit 3.3volt constant output,
An Esp32wroom,
The 2amp/5volt DC wall socket 230ac adapter
Will this step simultaneously charge the battery as well as the esp32 and can this setup work as ups
Sir,
I was expecting an expert advise regarding the question
Hello. Great work! Well done! BTW... I spent 34$ on Banggood using your ref link.
Thank you for your support!
Hi Andreas, greeting from Italu and nice video, a lot of useful informations here! I'm a bit disappointed that the boost IC consume so much, I'll try for sure to disconnect it
Good idea!
Andreas, thank you so much for research and broadcast effort. In your video #155 you speak about the good performance of the TP4056 as a good solar charger board. In this device, the TP4056 will extract the maximum power of a photovoltaic panel connected to the micro USB port or it will be needed an additional piece for doing the job? Regards!
You maybe have to adjust R2 as shown in the solar charger video.
Great mini UPS, let's hope the company watch your video and change the board with switching off the FP6298 and not just the USB output port. On Aliexpress the 5V Amps rating are changed to 2A in the description, bit closer to your load test :-)
Interesting that they changed the description...
For young players a good general overview of the do's and donts when relying on a non mains power source, I would just add that you characterize your devices ( main mcu/sbc, sensors ) thoroughly aswell as your systems duty cycle. I liked the nod to the 'non deep sleep' note on your consumption numbers.
I actually purchased a couple of solar charging boards from a EE on hackster IO after long conversations and alot of research, I was ok with the price which was a little more than these from China, but I had the added bonus that these were actually fielded in the real world power both esp8266 and esp32 boards of various types and sensors without issues.
Just as a note also for bigger iron ( Pi, BeagleBones etc etc ) you might do better with a hat/shield/cape as these are specifically targetted for these systems over being more generic, trade off is always going to be cost / your budget. Remember one thing though 'You get what you pay for'.
Again great video Andreas, as always great food for thought!
I have such a hat and it did not work properly. I had to „Pimp“ it :-(
What about us older players who don't know much. ;^)
@@dikl2689 Thats why we have Andreas ;)..
I don't like the DW01. Wherever possible, I replace it with a Fortune FS312F. It is a drop-in replacement that has much better voltage constraints; it cuts out at 2.9 volts on discharge and 4.25 volts on charge.
Thanks for the tip. I will try it out
NIce video. I have found that a low profile boost converter in combination with TP4056 ic for charging (and associated protection chips) is the best combination to use when powering something.
Specifically, I personaly choose to boost the voltage to 6.4V and feed that to the LDO of the uC i happen to be using as I have found that they are always very good in regulating the 5V bus at exactly 5V +- a couple mV. This is critical if using a hall sensor like ACS712 which needs exactly 5V to produce the 2.5V middle voltage.
Good solution for your special need. Not very power efficient, I assume...
Thanks for very informative video Andreas.
Please do you have suggestions for someone who is starting learning IoT. If you can point to some learning resources and suggestions in IoT kits etc.
Iot is a wide area. Google is a good source. And, if I believe my viewers, also this channel. Most important: Search a project you want to do.
Very cool. Thank you sir!
You are welcome
nice work, i'm searching for a LM1084-5V, i'm from spain, is the voltage regulator for a makerbot board rev e
Would love to see the PSB01012B reviewed. And the challenges with 3V/5V-mix projects.
The PSB01012B seems not completely different. Just other chips for the charging and the booster. And no 3.3 volts.
Your video is truly helpful and give valuable information (i couldn't find complete datasheet of V3 or the other shields nowhere)..
I just want to mention my problem in case you or someone has any knowledge.
I have the V8 model(2 18650 batteries)..and instead of switch there is a button in order to activate the 3.3 and 5v pins on each side.. the problem is that even if there is current need (e.g. a led) that uses these pins..there automatically deactivates after a minute..
Many powerbanks deactivate if not enough power is used. They are useless for low power projects :-(
@@AndreasSpiess but the one you use in the video the 3.3V and 5V pins are always on, even if you draw very little current..right?
Thanks Andreas. I learned some interesting things here. I wonder if it's possible for you to feedack to the manufacturer of the board about the trickle current resistance so that they could perhaps add it by default? I know that there are 100s of these suppliers and most will not care but just a thought. Anyway thanks for this tutorial.
They don't do that because the charge current you get might be too high for some cheap 1200mah or similar 18650 s people might put in there. It would be risky so they played it safe
Some of them watch my videos...
Great Video, I would really like to see a good circuit for low power application with 3,3v and two alkine batteries. All the hardware needed to run the ESP stable. What Mosfet or other device would you recommend to turn on and off a rfm95 or other sensors to safe power?
Maybe you watch my videos about the Amazon dash buttons?
Andreas thank you for sharing. Very very helpful as always. But can you suggest a different reliable 18650 batteries provider? That shop only ships to a few countries!!
I only can recommend something I have used :-(
I found it very useful
Thank you!
Great video and cool discovery, Andreas! Did you have the chance to check if changing the cut-off voltage of the board to 3V would be possible to prevent the TP 4056 to go into trickle charging mode in the first place? Maybe this could be a solution for applications where reliability is worth more than the lost capacity by the premature cut-off?
I think this is an internal function and cannot be changed. At least, I do not know, how.
These are absolutely great, I use them to drive and power the WS2812B smart leds on an electric skateboard. I was hoping to play with a accelerometer so add some sort of roll and acceleration effects.
Just a thought, nobody seems to do anything with wind powered ICs - would you consider covering some sort of self powered ESP32?
I tested at least one ESP module with battery.
I just wanted to say that I am interested in wind power for very small devices. But it is harder to work with than solar, because the mechanical turbine does not just switch off happily when the battery is full. Real wind turbines, even small ones, need some sort of 'brake' and a way to trigger it. Overspeed operation is a real hazard. See also "dump load."
Good video, thumbs up!
Thank you!
I am trying to do the same thing. What I figured is to use the tp4056+dw01 module for the battery charging and a MT3608 boost converter for powering the pi/mcu. I need to figure out a way to sense the battery voltage on the actual device(pi/mcu) to trigger a safe shutdown when the battery gets low. A simple comparator ckt can take care of turning the device on when the battery voltage gets above 3V.
I made a video about that.
Very good video !!! Do you know if it is possible to connect two of those shields in parallel?
It should be possible. But maybe you will not get double the output power.
At first thanks for the great job you did
I think i have idea ti solve the going below 3v problem
I think arduino must read the battery voltage using analog input
Then when the battery voltage gets below 3v the arduino will trigger transistor to make short circuit between the output terminals of the charging board of the battery
Thus the protection will work and cut the power
When the main is available again the charge board will work and arduino will work and the battery will charge
Monitoring the battery voltage with the Arduino is a good idea.
Hi Andreas, thank you for this video! I'm new in DIY electronics, just a basic question, how the 5v 2a pins in the PCB can be easily used? What type of connector should I solder/use)
This question is too general. I would say: Any connector which fits your needs and the dimensions of the holes. Most people probably would start with the small pins used on all MCU boards and cut 2 of them. Or solder two wires instead of a connector because it is more reliable.
I just wish the switch turned off All the outputs.
And a output disable at or below 3v on the battery
I can vouch that the black hole is real... Not only the holiday expenses, but the first week of January is when I also have to pay all of my professional license fees for the upcoming year, or else I'm not allowed to work this year. :(
This product looks interesting, just ordered a couple for testing. I mostly use Arduinos so I'm not too worried about discharging the cells too profoundly.
Modding SOIC8 chips this way is tricky, those pins are fragile. If I were to attempt it, I'd lift the pin only slightly, place a layer or two of Kapton tape between the lifted pin and the pad underneath, solder a wire to the pin and then the second wire somewhere along the trace away from the pad. And then glue the wires to the PCB with epoxy close to the solder points to avoid them getting yanked out by mistake.
I am sure I would be more cautious the second time ;-)
How does your version behave if you cut input power from it? Will it deliver output power uninterrupted? I purchased one, but it looks different and for a few seconds, cuts the power when input power is removed. Thanks!
A 2C "UPS" type supply with USB C in and say, 2A 5v output would be a great thing for the hobby market.
luckily those have existed for quite a while or you can just use a standard 18650 holder with one of the 2.1/2A 5V USB C + USB A charging boards that you can find for pretty cheap that are used for battery banks to do the same
@@MaxC_1do you have a link ? this type of UPS ?
any idea how one would attach a solar cell? Where would the inputs attach? thanks
At the mini USB. But only 6v
How much Watt or Ampere do i need (min and if there is: max)
What i understood from the video is, that i need a 6V solarpanel. I'll use this board with a LiPo 18650 2600mAh Battery, and the device it will power is an wemos d1 mini with a whole bunch of Sensors (Weatherstation).
Thank you in advance!
6:50 Cut the PCB trace instead. It's easier and you don't risk breaking the chip.
Maybe you try it . Will not be easy.
@@AndreasSpiess or lift one side of the IC, put Kapton tape in between the leg and the pad and resolder the other legs... Funktioniert gut und schnell 👍
I think this video title is somewhat misleading. I didn't watch it for a long time because I thought the knowledge would be specific to the board, but this information is very useful and generalisable (particularly the map of power options at the beginning)
My videos always should have a little bit more info than absolutely needed ;-)
HELPFUL !!! . . . . thanks much.
You are welcome!
Thanks for the very informative post. I'm trying to run a $4US LED (normally 3 AAA batteries) off of one of these modules. I have different varieties of LED. With one of them, with a USB LCD display of volts and amps in between, I get a reading of 1.55A, and it cuts off after 4 seconds and I have to remove and reinsert the battery. If I am providing power to the module, it continues running, but after several minutes, the LED dims and the display turns off. Flipping the switch off and on brings it back to 1.55A for a few minutes, then dim again (output USB voltage has dropped to 2V6).
With a different LED, it shows 1.33A and runs for several minutes (no mains charging). With mains, it runs for longer--but then burned out some of the LEDs and dropped to 0.041A. Oh, well.
One of the same type as the first LED has run on a 5V mains charger now for several months continuously. I'll next try one of the charging battery holders with 2 18650s.
Hope they come out with an iteration of this module which incorporates your suggestions and also delivers the current which it advertises.
I did not have users with more then one Ampere in mind as the battery would depleat very quickly.
Have you seen any of these modules which allow use of LiFePO4 batteries? They seem to be a much more robust chemistry.
No
Thanks for the video Andreas, I was looking for a module to hotswap 18650 but I wasn't able to find one, maybe you with your experience can suggest one. Something with back to back mosfet would be nice
I never had this requirement. So I never searched for it :-(
Another very interesting video, thanks!
Did you try connecting a ESP32 with deep sleep phases? Many COTS powerbanks just shut off when a MCU goes into deep sleep, I only found very few that keep providing enough energy to keep the device alive in its deep sleep state.
This one should not switch off. For sure not on 3.3v
@@AndreasSpiess perfect, thanks. Already ordered some for experiments anyhow :D
@@AndreasSpiess Tested it with deep sleep for days now and does now switch off when connected via usb
@@hansfortov Thank you for reporting the deep sleep results! Did you mean "Does now switch off" OR "Does not switch off" ?
@@TaiViinikka we will never know :)
For 3.3V, it's worth looking into using LiFePO4. Its voltage range of 3.0-3.6V is pretty much a perfect match for 3.3V logic.
I did this long time ago and made a video ;-)
Sehr interessanter Beitrag.
Danke!
Nice video 🙂
Thank you!
What about adding a diode after the battery and a connecting the boost/ldo directly to the power supply? Would not this solve all the problems while charging and "discharging" at the same time? (provided that the psu is good enough).
Maybe you make a drawing and include the fact, that a diode has a voltage loss of about 0.7 volts. Then you see if you find a way which works.
Thank You So Much Andreas, For me They do very Well, More becourse of your good explanation Witch Chine-People do not give.
You are welcome!
What would happen if you wired 2 of this input and output directly in parallel and bridged the 2 batteries to gather would you end up with 2x the charge current and 2x output current?
connecting two LiIon batteries can be done and you get double the capacity at the same voltage. But it is not without danger the first time if one is fully charged and the second not.