Looking good mate, I hope the wait was worth it, great vehicle, they drive so nicely. Hopefully the rain will hold off enough this week to dry out the track. I'm looking forward to my second run with the truck, after some tweaks I think it's going to be a pretty strong contender. Congrats on your build, you've done a great job with it!
Hey bro just built mine and following your vids probably saved me so much time and helped me do things the right so rly appreciate the hard work. I like how you fed the switch to the other side, probably the best idea, I’m doing the same but I gotta ask wouldn’t that wire be a little exposed to the center diff cup, Lemmi know thanks.
Great setup. Did you go with the 6S or 4S Backflip LP wheels/tires? I know some people are running the 4S version for weight savings so the diffs don't get strained.
I bought 2 pros that sucks didn’t know they can’t do 6s with I would of watched this. I also bought the damn buggy motor instead of the truggy. So I guess I’m ordering a eb48 2.0 next
Did you just slide that motor in there that easy? I ask because I have a Spectrum 2050Kv motor and I can't get it to slide in at all because of the Screw in the esc/servo tray blocking it and the front end of the motor sits directly on the chassis plate.
@@iftibashir awesome! Thank you. Just built an et48 with a lot of help from your videos. It's my first electric though so it's a bit scarier than nitro
Brilliant job! Beautifully polished video as always 👍👍 Looking forward to seeing you put the beast through its paces😃 Will this be purely a basher or will you throw a set of truggy wheels and tyres on it and hit the track at some point??
Fantastic Video!!!!! This helped me so much building my own Tekno. Great content! Thank you so much!!!!!! Very Well done Sir!
Thank you! Glad it helped!!
@@iftibashir are you going to Upload the first run Video too?
Wow that servo is overkill. I have the DS555 on my MT410 and it's ridiculously powerful and fast
Great video. I have the same setup apart from the servo. 👍
Superb review. Really well done. Subscribed and thumbs up!
Thank you!
Looking good mate, I hope the wait was worth it, great vehicle, they drive so nicely. Hopefully the rain will hold off enough this week to dry out the track. I'm looking forward to my second run with the truck, after some tweaks I think it's going to be a pretty strong contender.
Congrats on your build, you've done a great job with it!
Cheers!
Was watching your video the other week - seems to be running nicely!!!
Hey bro just built mine and following your vids probably saved me so much time and helped me do things the right so rly appreciate the hard work. I like how you fed the switch to the other side, probably the best idea, I’m doing the same but I gotta ask wouldn’t that wire be a little exposed to the center diff cup, Lemmi know thanks.
Actually now that I’m finishing the motor kinda holds the wires down a bit and stretched them out so it rly wouldn’t be a problem 👌
@@radiocontrolledmadness8119 You could always use some heat-shrink tubing around the switch wires as some added protection ;o)
Great setup. Did you go with the 6S or 4S Backflip LP wheels/tires?
I know some people are running the 4S version for weight savings so the diffs don't get strained.
I went with the 4S Backflip LP. Waiting for the rain to stop so I can try a test run!!
What bag are the screws in to attach the motor to the motor mount?
Hi, im doing the same set-up. I'm finding that the M3x10 mm engine mounts screw are slightly long?? Yours went in no issue?? I ordered 8mm to be safe.
Yes all my screws are the ones that came in the package..... 8mm should also be fine though ;o)
Yes, the 10mm are too long. 8mm are perfect.
I bought 2 pros that sucks didn’t know they can’t do 6s with I would of watched this. I also bought the damn buggy motor instead of the truggy. So I guess I’m ordering a eb48 2.0 next
Did you just slide that motor in there that easy? I ask because I have a Spectrum 2050Kv motor and I can't get it to slide in at all because of the Screw in the esc/servo tray blocking it and the front end of the motor sits directly on the chassis plate.
I didn’t do anything special to slide the motor in….
what wheels did you put on?
Can you recomend servo under 100$ any popular brand ?
Hey awesome video man but what happened to the RC world of your vids lol?
Yeh Ive been slacking!! Weather has been bad here - will be picking up a new RC soon now that summer is arriving.....stay tuned!
Do you leave the bullets in the battery even when storing it?
As long as the other end is not connected to anything it doesn't really matter.......
@@iftibashir awesome! Thank you. Just built an et48 with a lot of help from your videos. It's my first electric though so it's a bit scarier than nitro
For bashing I prefer the easy run series. The XR series is good but not waterproof
My RC's never get wet TBH! lol
@@iftibashir ah. I wash mine after each bash:)
Brilliant job! Beautifully polished video as always 👍👍
Looking forward to seeing you put the beast through its paces😃
Will this be purely a basher or will you throw a set of truggy wheels and tyres on it and hit the track at some point??
Hi basher only at the moment. We do have truggy 6mik racing tyres to try at paddlesworth next we are there. Many Thanks for watching. 👍🇬🇧🤘
Just a basher for now - would love to get it on a track but unfortunately have no track anywhere close to me!
@@Stewss47 a few of us at our local club in Northern Ireland toyed with the idea of a trip to Paddlesworth at some point!!
Could happen yet 😃
@@TimsRcsurgery hi it is a good weekend. Lots to do and Lots of cool people and pretty chilled. 👍
That servo is pointless when you consider the servo saver is overpowered at way less torque. Even on my xmaxx it's a waste.