Next video Restoration Old Rusty Hydraulic Jack, 50Ton Car Jack After Years Of Use/Complete Amazing Restoration ruclips.net/video/8lhMBfRqN3Q/видео.html
No DOUBT about the SKILL! It IS great √√ -- BUT please DO ->NOT use the Word »RESTORATION«!! Use instead Words like: »Repairing, Make-Over etc.«! The Word »RESTORATION« is STRONGLY connected w/ HISTORY! As such, one is NOT allowed to do what ever he/she wants to do! Get yourself INFORMATION about that product as much as you can get, and the »RESTORATION« should be oriented towards that. NO color changes, no add-ons. For e.g. Handles were added to the jack => VERY bad thing! Color-scheme is Orange and black, I am not so sure if the ORIGINAL color looked like that. After removing all the dirt and rust, a SOLID --CLEAR coat would/could the protection too, and the »70 Years« would be still visible!
Word of advice on putty sanding wet sanding can leave the bondo moisture bound leaving trace amounts deep inside the primer or pant will trap moisture under and within time items will rust under the paint,recommend dry sanding then primer over the putty.get better results I've been doing body work for a long time professionally but all looks good kid keep up the good work.
Nice video, do you rebuild for people, question if you don't mind answering. I have a craftsman ATV/ motorcycle scissor lift. I removed it to try to bleed. I can pump it up all the way but it slowly creeps back down. It has the spring on side from base up to head. No matter how I try to bleed the air out it just keeps going down. It has a foot pedal to release jack, not a screw type. Can you tell me if you think it could be an o-ring that's causing this. It's in great shape no rust and hardly used. Your thoughts would be appreciated. Thank you
Bom Dia Vcs são muito bom em reparo de macacos hidráulico ,amo vê esse vídeo. Eu morro no enterio do Ceará, e tou comendo a faz reparo em macacos , mais não sei a onde encontrar os reparos pra comprar, vcs podem minda uma dica ou algum nome de distribuidora para eu comprar alguns reparo pra mim.
No vice, which is essential in any workshop, used the Stillson wrench the wrong way round, didn’t mask the piece properly, and anyone who uses this is going to destroy the orange pant on first use. Apart from that its another renovation vid.
Superbe vidéo de restoration, bravo ! Je possède le même hydraulique jack, pouvez vous m'envoyer la référence des joints svp. Je vous remercie par avance !
So let me get this straight: (1) A box is shipped from one address in LA to another. (2) Both names in the box are Spanish. (3) But when the video ends I see some Vietnamese squatting, asiatic style, under a truck in....VIETNAM!!! C'mon man!!!
а парень то реально рисковый - металлической щёткой в одной футболочке чистить! мне как то осколок попал от такой в руку вощёл где то на сантиметр и это через спецовку
Next video
Restoration Old Rusty Hydraulic Jack, 50Ton Car Jack After Years Of Use/Complete Amazing Restoration
ruclips.net/video/8lhMBfRqN3Q/видео.html
На точно такой домкрат, сальники где заказать??
No DOUBT about the SKILL! It IS great √√ -- BUT please DO ->NOT use the Word »RESTORATION«!! Use instead Words like: »Repairing, Make-Over etc.«! The Word »RESTORATION« is STRONGLY connected w/ HISTORY! As such, one is NOT allowed to do what ever he/she wants to do! Get yourself INFORMATION about that product as much as you can get, and the »RESTORATION« should be oriented towards that. NO color changes, no add-ons. For e.g. Handles were added to the jack => VERY bad thing! Color-scheme is Orange and black, I am not so sure if the ORIGINAL color looked like that. After removing all the dirt and rust, a SOLID --CLEAR coat would/could the protection too, and the »70 Years« would be still visible!
👍 ......... !! I am Apllaus for you. Chalam... from minahasa in nort sout sulawesi, Indonesia.
Bravo TNI /POLRI.
NKRI 🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩 Yes.
Trabajo muy especial pocos cómo tu que Dios te bendiga siempre 🌄🌅🙋♀️🌄🌅🙋♀️
Great job , bro ! 1oo % .
Thank you very much. Please follow and support us!
Lần đầu tiên thấy một ông Việt Nam quay video sửa đồ có tâm và nhìn chuyên nghiệp như vầy. 👍
Thanks to RUclips service
good test at the end well done
Eline sağlık dostum
Cảm ơn bạn rất nhiều. Hãy theo dõi và ủng hộ chúng tôi! Chúc bạn sức khỏe
@restorationsskills4967 For those who don't know, it's great that you supported them.
Beatiful 👍
Word of advice on putty sanding wet sanding can leave the bondo moisture bound leaving trace amounts deep inside the primer or pant will trap moisture under and within time items will rust under the paint,recommend dry sanding then primer over the putty.get better results I've been doing body work for a long time professionally but all looks good kid keep up the good work.
Wow congrats.amizing😎
Thanks for the video on the repair of old bottle jacks. You did a very good job.
Thank you very much. Please follow and support us!
Belíssimo trabalho, parabéns!
Lo veo de bogota quiero comprar las empaquetadas de diferentes diámetros gracias
Thank you very much. Please follow and support us!
Ficou original parabéns
Thank you very much . Please always follow and support us!
Thanks!.
Gostei muito do trabalho de pintura do macaco hidráulico
Thank you very much please always follow us
Gracias que buena enseñansa y ejemplo para todos
nice job all round 10 out of 10 well doe
Good job bro
Nice
Thank you very much . Please always follow and support us!
Nice job
Nice job 👍
Good work, but I do not agree with the filler epoxy on the head of the jack where the load goes, I could see that failing and creating a hazard.
should have cleaned it up on the lathe whit it was there.
Quá tuyệt vời
What are you using to wash it
You just clean and paint not restore
Good restored! Now you can use this jack for a decades or more...
Supeeeeer
Thank you very much. senior follower
Muy interesante dónde c conviven los empaques y si se piden x alguna medida
Te quedo con aire. Pero buen trabajo
Thank you very much
Nice video, do you rebuild for people, question if you don't mind answering. I have a craftsman ATV/ motorcycle scissor lift. I removed it to try to bleed. I can pump it up all the way but it slowly creeps back down. It has the spring on side from base up to head. No matter how I try to bleed the air out it just keeps going down. It has a foot pedal to release jack, not a screw type. Can you tell me if you think it could be an o-ring that's causing this. It's in great shape no rust and hardly used. Your thoughts would be appreciated. Thank you
со шпаклей повеселил конечно, особенно с оголовком😂😂😂
домкратить только пенопласт можно🤣🤣
Good 👍
I like your tool layout on the plywood behind your work bench. Nice having so many tools at arms length. Looking forward to your next video.
Thank you for watching the video and supporting me
@@restorationsskills4967 I agree with this comment. Your work area is very well kept and organized. I'll look for more of your videos. Thanks
Itu dongkrak mobil yang kapasitasnya berapa ton ?
40 ton
Where can I order the restore it’s,(o rings, ect😊
What help do you need from us?
Nice job on the resto just please don't ware glove when using a lathe even for sanding, if they catch your fingers will be gone in a flash.
THAT PAINT DIDN'T HAVE TOO BE THAT GOOD FOR A BOTTLE JACK.
Nice 👍
Bom Dia
Vcs são muito bom em reparo de macacos hidráulico ,amo vê esse vídeo. Eu morro no enterio do Ceará, e tou comendo a faz reparo em macacos , mais não sei a onde encontrar os reparos pra comprar, vcs podem minda uma dica ou algum nome de distribuidora para eu comprar alguns reparo pra mim.
Your effort are valuable.thanks to your creative job .👌👍👍👍
Thank You Very Much>>>
Sama seperti profesiku
Very impressive job 👍 love the new colour. Finished job looks amazing.
Thank You Very Much
@@restorationsskills4967 en
Where did you find the new gaskets
Chic pistones el hilo y el eje
Thank you very much. Please follow and support us!
Okعالی
Thanks
Mamwewo te cae en las manos
Kivalo
Do you use petroleum for degreaser? Great job btw!☺️👍
Nice project refurbishing. That jack looks to be a large tonnage jack. Do you know what ton it is? Thumbs Up!
Thank you for watching the video and supporting me
No vice, which is essential in any workshop, used the Stillson wrench the wrong way round, didn’t mask the piece properly, and anyone who uses this is going to destroy the orange pant on first use. Apart from that its another renovation vid.
No vise? It’s visible at 1:10 and he used it at 10:30.
@@SilverFox-sx4rq yes, you did, but make life easier, use it all the time
Do you use new rubber seals?
Superbe vidéo de restoration, bravo !
Je possède le même hydraulique jack, pouvez vous m'envoyer la référence des joints svp.
Je vous remercie par avance !
Would You please send me all reference of new O-Ring please, i have the same hydraulique jack.
Thanks in advance
Цилиндр можно было тоже открутить.
Маленько не логично дрюкать наклеп напильником, имея доступ к токарному станку.
Не логично шпатлевать кожух, когда гидрошток упорот, весь в кавернах от коррозии. Главное покрасить красивой краской и успех гарантирован)))
Вот нахрена так кислотой обливать чтобы сильно ржавая выглядела? Никогда такое ржавое не видел, даже 30лет валяются и так не ржавеет!
Во жесть, диск на передке в хлам, шпаклевать дамкрат это сильно!!!
Why did u left there the adress ??
قمطه جميله
That was quick 30 odd seconds, why show the end result at the beginning?
Os buracos do Brazil o robô cai dentro 😂
Le falta experiencia quedaron un par de detalles
Encima al principio sale desarmandolo un chico y lo termina de armar un hombre con barbijo jajaja
So let me get this straight:
(1) A box is shipped from one address in LA to another.
(2) Both names in the box are Spanish.
(3) But when the video ends I see some Vietnamese squatting, asiatic style, under a truck in....VIETNAM!!!
C'mon man!!!
Our headquarters is in Vietnam. Thanks for your feedback
Só eu que não confiaria em usar isso, mesmo depois dele ter "reformado"?
а парень то реально рисковый - металлической щёткой в одной футболочке чистить! мне как то осколок попал от такой в руку вощёл где то на сантиметр и это через спецовку
🤗🙏👍🇻🇪
Release failour
Good video , but take off your mask …
Escreve em português
Speed 2x for view.
Nh
Азелит колдансай