Harbor Freight 5 Speed Drill Press Review After 3 Years of Use!
HTML-код
- Опубликовано: 11 июл 2024
- Welcome back to the shop, friends! Today, we are reviewing the Harbor Freight Central Machinery 8" 5 speed drill press. Be sure to tune in at 6:11 for a special message about an upcoming video! I have included the link below to the Harbor Freight machine and some comparable models on Amazon.👇👇👇👇
Harbor Freight 5 speed drill press: www.harborfreight.com/8-in-5-...
Comparable Models:
WEN Drill Press: www.amazon.com/gp/product/B00...
Grizzly Drill press: www.amazon.com/gp/product/B08...
_______________________________________________________________________
🎥 Are you a RUclips video creator and in need of good quality thumbnails to improve your CTR? If so, I recommend hiring Thumbnailwiz to help you achieve your goals (affiliate link) 👉👉 👉👉👉👉👉 thumbnailwiz.com/ref/15/
_______________________________________________________________________
🔴 Subscribe: / @lastingbuild1373
Music: www.epidemicsound.com
Instagram: / lastingbuild
_______________________________________________________________________
My Favorite Tools(affiliate links):
Wood is Good 20 Ounce Mallet
www.amazon.com/gp/product/B00...
Wood is Good 18 Ounce Mallet
www.amazon.com/gp/product/B00...
Wood is Good 30 Ounce Mallet
www.amazon.com/gp/product/B00...
Stanley Sweetheart Chisels
www.amazon.com/gp/product/B00...
Stanley #4 Bench Plane
www.amazon.com/gp/product/B00...
Stanley No.62 Low Angle Jack Plane
www.amazon.com/gp/product/B00...
Stanley Marking Knife
www.amazon.com/gp/product/B00...
Husqvarna 13” Wooden Hatchet
www.amazon.com/gp/product/B00...
Dewalt 20 Volt Drill and impact driver
www.amazon.com/gp/product/B00...
Disclaimer: LastingBuild is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. 
Развлечения
Be sure to check out the Drill Press Table I build for my Harbor Freight Drill Press 👉👉 🔴 ruclips.net/video/wN1sJHlEodE/видео.html
you all probably dont give a shit but does anybody know a tool to log back into an Instagram account?
I stupidly lost my login password. I appreciate any help you can give me!
@Grady Gavin Instablaster :)
@Ephraim Wells i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff atm.
Looks like it's gonna take quite some time so I will get back to you later with my results.
@Ephraim Wells it worked and I now got access to my account again. I'm so happy!
Thanks so much, you saved my ass !
@Grady Gavin glad I could help :)
Had mine for 30 years and it still does perfect work
Harbor Freight's model was to offer old style, easy to produce, less expensive tools that were accurate enough to get the job done. They are changing the model now with more expensive tools, but the old stuff still works. I have the drill press, and an old Jointer from HF. Neither have any whistles or bells, both just do the basic job and keep working. Very simple, usually easy to repair too. No complaints here for the price.
This is a Very Helpful video! Thanks 😊
Thank you sir. Im in the market for a drill press and was thinkin going the Wen 10 “ 4210T model for $140 but now i might think about saving some cash and goin this route. Not sure but appreciate you takin the time to show us this option👍🏼. Wish u n the loved on safety n blessings 👊🏼.
I am a beginner woodworker and absolutely love every second im in the garage. Have a lot to learn and im excited to gain all the knowledge i can. 👍🏼
Thanks again
I'm looking at a bigger drill press from HF, but this is the information I needed. Thank you.
Appreciate the review!!
I commented on your review of the HF belt/disc sander, mentioning that for many people the option is HF or no tool. I was excited to see ypur review because I have this drill press, too. I bought it from a guy for $30 about 3 years ago, so it is likely 6+ years old. I turn it on and it spins and makes holes in wood. Just like the sander, when one has realistic expectations of what the machine can do and what can be done to make it more functional in an individual's situation, it is a great addition to the shop. The only time I wished I had a different one was when I built a table where the base was 4 inches thick and needed a hole for a mortise but the drill press was too small. Still, I made the hole with a hand drill and it worked fine. I jist can't see dedicating the floor space to a large machine. I store this one on a shelf under my work bench. Your review is honest and useful. I will look forward to your drill press table build! Thanks.
Great video I'm glad it's after 3 years of use and I hate reviews after one use your review is perfect.
Subbed! Thanks for the review!
Good info! Thanks for posting.
Thanks Jeff!
Nice job. It was clear and easy to understand and not too wordy. Well done!
Great! Glad you enjoyed!
I've have this drill press for about 2 years now and I love it, is just perfect for the type of work I do around the shop. The led light tip is a cool addition I might do that when mine runs out. Great video!
Rose Wood Work thanks for sharing!
Get the LED bulb at dollar tree for a buck (and buy for all your house bulbs while you are there)
Thank you, for a very interesting and informative video, some great tips
Take care and be safe
Sam N.Ireland
Thanks for the video. You are almost to 1000 likes!
Good sharp bits make all the difference
Off to harbor freight I go... again 😆
😂 I can’t get outa there without spending money
The accuracy 😂😂
Place is great, I love going 😁 always walk out satisfied
Great review Jim! I almost bought this one but then found the same size Wen on Craigslist. Another great video thanks for sharing!
The WEN looks pretty solid! Do a review for us🤔
I have the next size up 10" 12 speed (Tabletop) and have used it for years. These are a great bargain. I also Added Steve Ramsey's drill press table.
I just started putting together a shop to work out of and my wife surprised me tonight with this Drill Press. Thanks for the review, I was a little hesitant to unbox and set it up because of the comparisons to the WEN and wasn't sure if this press would be worth it. Your video has changed my mind on that.
Russ Thacher cool! Glad it helped! Check out the drill press table I built! A table is super helpful!
Haha, my wife surprised me with mine, as well. I VERY frequently use mine for putting pin and weight reduction holes in high carbon steel knives, and it still runs great.
Thank you very much, I just put my 69.00 - 15.00 drill press together. Cant beat this price! Definitely an upgrade from my little dremel drill press hahah.
Jim, appreciate the review of the lowest end Harbor Freight drill press. I happen to have this same model and am reasonably happy with it for what I need. Jim, one thing, its biggest drawback, setting table height. Without a geared post, this can be a frustrating task, especially if you need to set it accurately. It can be almost impossible to raise or lower the table without rotating it at the same time, and then hold it steady while tightening it in place. I also have issues with the depth stop which is cheap and undependable. Still, you are right. It's a good usable tool for the price. Thank you.
Very good points Terry! I completely agree! Useable without bells and whistles!
Just found you're channel. Excellent review. Checked out some other stuff of your' s. Subscribed.
Great! Welcome!
Good content
Thx!
I subscribed as soon as you said you had the tool for three years. Most of these guys use a tool for maybe an hour and post reviews as if they really know it. Thanks for actually knowing what you're talking about. I just pick up this drill press for $35 from someone that used it once and it sat in their garage since. I was already think of building a bigger table, so I'm watching that video next. Any thoughts on changing the table angle bolt to something like what's used for the table height?
Offset the drill block. Thats the only thing that I wish I had done differently.
Thank you for your advice and for your review man I greatly appreciate it! I've been debating on which on to my to assist me with my building of 80% lowers, would this also be a good tool to drill out aluminum with out any issues? As well as polymer?
Great review, easy to watch video. Like number 966 and one new Subscriber! Keep it coming!
Awesome! Welcome!
The loudest press available as well. The WEN press for a few dollars more is 100% better.
I hear good things about the WEN
Hi Jim, my drill press is about the same as your accepting that it is a floor machine. I have had it about 40 years and it was second hand when I got it I have made a table for it and that was an excellent upgrade, in all the time I have had it I have never moved the table from the 90* mark. I have had to replace one of the bearings in the gear reduction part and I super glued the three parts in after they kept falling out. I hope you get as much work out of yours. I know the new ones come with all sorts of “upgrades” but that entire means is there is something more
Thanks for sharing John!
I have an electronic square. Works great. Also put a wing not on the table tilt. You are not going to break any speed records but it is great.
Considering one of these to drill mesh from sheet metal for the line of work I want to do.
I agree, Jim great review! I have a nice floor drill press which works great for me! It would actually be nice for a smaller drill press for secondary operations! I sound like a full blown machine shop.....lol That is how my mind works. Always looking for the most efficient way to get the job done!!
How big is your shop, Bret?
How big is your shop, Bret?
LastingBuild it will be on an episode of tiny shops some day..lol. It is approximately 12 X 25 with a garage door on each in as a drive through.. I moved from Kansas a few years ago for my job. I gave up a 30 X 50 shop I built myself, That was a tough transition. Working in the aircraft business you learn a lot about lean manufacturing. So I have to apply the basic principles as much as possible.. I still have a lot of pack rat in me I just have to be creative , Lol! have a blessed weekend Jim thanks again for taking the time to do your videos...
The depth stop on mine is all plastic and bends easily. I wish I had gotten the next higher model for the geared post and deeper throat. For $54 new, it's been a good value. Someday I might make a depth stop that works.
I picked up one of these about 25 years ago. It was painted green and had a nice keyless chuck, but otherwise was the same. It was an absolute tank. The only time I ever managed to stall it was drilling a 2 3/4" forstner bit into purple heart. The only issue I ever had with it was it size. I constantly needed more capacity, so I unfortunately replaced it with a larger Delta. That Delta has been the biggest piece of crap in my shop. It doesn't stall, because the chuck can't hold anything. I replaced the chuck with a keyless one and that worked better. But now the whole thing has fallen apart. I might just replace it with one of the Harbor Freight floor models.
been using mine over 30 years now ,no trouble
At 4:43 you canclearly see the slop in tollerence as the forsner bit shifts with torque to one side. That said it's still totallu useable for the type of shop work shown here in this video. I am considering buying one. If I was doing metal work I would get one of the many old cast units frequently found on craigslist at around the $200 mark
The main issue that still irritates me about mine is the quill has a lot of front to back slop. Even the left to right slop required removing the quill, polishing the set screw groove, and rounding the end of that one set screw better than it was. It was rough enough to be gouging into the quill. I've seen one potential solution of adding nylon or brass set screws in that axis, except the on/off switch is in the way, which would suck to remove every time I want to adjust those. I'm considering some kind of spring loaded mechanism added in behind the side light's switch panel.
I'm considering this press for 1 1/2" holes in hemlock boards for bluebird houses. In your opinion would it work well with that big of a bit? Thanks in advance and appreciate the review
Just bought one for $30. Looks new. Cant wait to drill some holes. What size bulb does it have?
I have considered picking this drill press up but I would be using it for metal & wood. How well does it do when drilling metal? What would the thickest you would advise for this drill press.
I just got mine the other day, and one thing I noticed is the bottom side set screw that holds the headstock to the pipe snugs up fine, but the one above that screws all the way thru until it falls out of the threads and down inside the pipe. There's a small rod/pin that protrudes from the back inside the collar of the headstock that stops the pipe from travelling upward any further, but the screw thread is above that. Was yours the same way?
Thanks for making this video. I purchased this 8 inch drill press a couple of days ago, watched your video and was up and running in ten minutes. Well sort of. Even at the slowest speed (760 rpm) it stalls constantly. There is decent tension on belt with about .5 inch of play, any suggestions?
Just play around with the tension. I thinks that’s par for the course though
Have you tried drilling through any thick steel? I’m sure I would have to take my time but I’m wondering if this could drill through 1/4 inch steel decently
I've had the HF 13" floor press for nearly 15 years, still use it regularly, it may not be fancy or pretty but it works very well for the price I paid back then.
My return spring for the chuck broke, how do I get another one? Tired of using a bungee cord....
That front pully on mine came loose. Any idea what size and thread count it takes?
What brand of forstner bit do you use? I recently bought an Irwin Marples 1 1/4 and it barely makes a good cut without jamming up. Takes a good few minutes to get a hole in a 2x4 even after sharpening it. Also bought a cheap 2 3/4 one and that one sucks too but I figured cause it was off amazon. Would love to have a 1 3/4-2in forstner bit cut like that on my HF drill Press
Mine are Freud!
How long is the table from the left hole to the right hole
One frustration I forgot to mention is I haven’t found a chuck key that fits perfectly! I bought it used and it didn’t come with the key. Anyone know where I can find one?
My came with one, but since I tend to misplace things, I bought a two sizes, ratcheted one from HF. The larger size fits perfectly. The ratcheting is handy, too.
Will it go through metal?
Hey yall. Im getting kicked i purchased one about 3 months ago. My chuck seems too small. How do i attach that thing?
4:28 is that woodworm in the oak?
Yeah but how much slop in the spindle when you go to drill steel?
There’s only two things I truly trust - VTI and Harbor Freight tools
you must have trust issues if you trust harbor freight tools lmao
I have the same one, broke the depth stop on it about a year ago and adjusting the table can be a hassle.
Thanks for sharing!
@@lastingbuild1373 I'm still using it to this day.,
I was going to buy the Wen press, but HF has the 8in for $55 right now. So I figure, I'll try it. I only have 1 functioning arm, so I'm not sure itll work for me. But drilling 90° perfectly has been impossible without a press... no matter what "hacks" or tools I've tried.
Build yourself a nice drill press table with a fence and hold downs! Makes it a much better tool!
@@lastingbuild1373 I do have a question about that... Do you think changing the belt could be done with 1 arm?
Or, would it be thrown off in some way if it was tilted tilted? Like could I mount it to a flip table? I just find that certain tools ( router table, or miter saw) are easier for me to adjust in different positions... I'm not sure if a drill press can be flipped like that though.
Does this have the capability of drilling through a 4x4 in one pass? It doesn't look like it has the height. If you put a long bit on it that has to go 3-1/2", you still need enough clearance to get the 4x4 under the bit. I guess one could flip the piece over to drill from the opposite side as long as the marks for the holes are pretty exact. The other issue is using something to support the long end so it stays level.
Looking for the same info, did you find the answer?
Are you hiring a cue card guy or more importantly a post audio guy to compress your dialog with a 1:5 ratio, medium attack, medium release? I'm thinking I might go with the Grizzly Baby 8".
Great review! There are a few decent tools at HF
My table wont lock, any answers???
I bought this drill press about 6 months ago. When I try to use it it will not turn unless I get it started by hand. It’s in a none heated garage but it hasn’t been that cold here in ND. Tried it yesterday and i could not get it to turn on its own. Any ideas out there?
You might try loosening the drive belt a little bit!
@@lastingbuild1373 thanks ! I’ll give it a try.
Just used one time,reason it goes all over even when guild hole. Save your money!!!
I found a Rockwell delta for $75
Do you know if it can take a morticing jig attachment?
I’m not sure but would guess, no!
I've wondered that too. Possibly if you remove the depth stop attached on the bottom of the quill, but not sure if that has the standard diameter for those mortise squaring attachments.
I get vibration when working with the press. How can I eliminate the vibration?
Try screwing drill press to your workbench, assuring the belt is tight and assuring your chuck is tight. Thats all I know to do.
The plastic depth gauge broke on mine after no time at all and they dont offer a replacement.
yes! that part is super poor quality!
Sub’d & Bell’d thanks
Can this drill metal?
I have not tried that I can recall. I'm sure it can but not as efficiently as a larger model.
Don't bother. This trash will just get you killed. I've done a couple of "projects" on softer metals with this thing and was pulling my hair the whole time. The "metal column" on this thing is made out of chinesium and you will dent it with a set screw. It's actually quite pathetic.
I have one and the bit doesn’t stay stable it shifts to side and you’ll not get a good results,
Bit wiggles a lot.
The table and base appear to be sand cast iron or steel--not stamped steel.
912 likes! Not far from your 1000!
Didn’t realize how close to 1000! Very cool!
@@lastingbuild1373 hope you get there BTW I bought the $139 model of this product because of your video thanks a bunch! Very helpful
Not keen on the stamped base and table.
I prefer cast items.
Why would you really want to change the belt to the different rpms?
If you run the cutter too fast it can overheat from friction, or vibrate from running a really wide tool. If you run it too slow, you either take too big a "bite" per revolution, and stress the blade, or go really slow drilling.
Also, it'll bog down on bigger cuts if it's going to fast. The belt will slip.
you want at least 9 amps
Gauging concentricity...by eye. That's a neat trick. Impossible, but you saw it here, folks. Silly me, when this was first said I imagined drilled holes in steel measured with gage pins. My fault. This is a joke of a machine; yet a fine starter press for a kid. If you only care about punching through some wood, really, doesn't matter what you use. Even a POS like this with a less powerful motor than a flexshaft grinder, 2-inch quill travel, deflection everywhere, and enough runout to be called a blender will do the job. It's wood.
You machinists are so arrogant. Go lose a finger.