⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
This is a Browns gas torch. It is hotter than regular oxyhydrogen because it has a substantial amount of singlet oxygen feeding the burner. This adds an extra 1.3eV of energy per reaction over normal O2 ❤ also your setup should include a flame arrestor or it might flash back and cause a small explosion similar to a large firecracker and wreak your device and possibly injure you 😮
preventing flash back, can you have a brass ball valve , when the gas pressure is high it is open nozzle and if there is a flash event occurs it is flashed back towards nozzle hole to cut off gas.
Очень хорошо! Много лишних гаек- они оцинкованные и сгниют, загрязняя электролит. Лучше пластиковые шайбы. И потоньше - влезет больше электродов. Хочу себе такой электролизер - он такой милый 😊
@@Saeedgf3 درود بر شما دوست گرامی شما که فارسی اینقدر قشنگ مینویسی به زبان فارسی زیر نویس کن یا توضیح بدهید محتوی برای من مهمتر از یادگیری زبان انگلیسی است دوست عزیز همدلی از همزبانی خوشتر است
In this video, we worked as a laboratory. We use the produced hydrogen and oxygen directly because the accumulation of these gases without special equipment is very dangerous
Excelente, amigo. Gracias por tu trabajo. Creo que voy a intentar reproducirlo con el doble de placas, a ver si logro un poco más de potencia. Saludos desde Argentina.
To avoid the Flshback, twist some steel wool so that you get a tiny sausage of 1-2 cm and as thick as the pipe alowes. Put it into the copper pipe right at the front where the flame is. This way the flames can't flash back. Same principle like a sieve and fire not goig through. Hope that makes it safer.
It is better to use stainless steel for the electrolyte. We used normal water and added 2 cc of battery water, but it is better to use sodium sulfate instead of acid
Thank you for your opinion Our work is limited to a laboratory that only demonstrates the concept and efficiency of electrolysis. And if someone wants to use this process industrially, he must have the necessary standard mechanism
Hello, producing liquid hydrogen at home is generally not legal due to severe safety risks and the need for advanced equipment. Liquid hydrogen has extremely low temperatures and explosive properties, which require controlled industrial or research environments and strict regulations. This process requires specific permits and specialized knowledge. If you're interested in this subject, I recommend learning and experimenting in safe, supervised environments.
ruclips.net/video/Vy-m6f5ipkA/видео.html ruclips.net/video/RCgW_vFS1Ak/видео.html I put some of the links for making the torch Visit the channel to see the making of different types of torches
Thank you for your opinion In general, in addition to using special tools to prevent flashback, the speed of the flame exiting the burner should be higher than the speed of the flame spreading backwards.
Thank you for your suggestion! While soda water contains dissolved carbon dioxide, which forms a weak carbonic acid and could slightly increase the ion concentration in water, it's not the most efficient choice for electrolysis. In my video, I recommend using sodium sulfate (Na2SO4) as an electrolyte. Sodium sulfate is a much better option because it fully dissociates into sodium and sulfate ions in solution, significantly improving electrical conductivity without producing harmful by-products like chlorine gas, which can occur with sodium chloride. This makes sodium sulfate a safer and more effective choice for optimizing the electrolysis process.
Друг мой, если выходная скорость горелки выше скорости распространения пламени обратно, титановая игла вам больше не понадобится, и добиться этого можно, выбрав головку горелки с небольшим отверстием.
My friend, you can buy from online stores or you can make it yourself by watching some videos below ruclips.net/video/Vy-m6f5ipkA/видео.html ruclips.net/video/RCgW_vFS1Ak/видео.html ruclips.net/video/Yo0JbwxWM9Q/видео.html ruclips.net/video/KIX9NWG_c9Q/видео.html ruclips.net/video/7-CTWhw2_so/видео.html ruclips.net/video/UBme63D05kI/видео.html
Your design is remarkable Write input data V, I, R, wattage consumed at 12 volt imput Output H2 production in cc per second achieved Water consumption per second??? Digital controller displaying V, I, R, P, imput H2 cc /second, water consumption per second With a inclined Mano meter digitally I am a retired production technologist , qualified from UET Lahore, Btech Hons graduate, as DCE retired in the field of mfging
Thank you for your insightful question! 1. Current (Amperes): The electric current, measured in amperes (A), is the rate of charge flow. It's important because it determines how much electrical energy is being transferred per unit of time. 2. Energy: In electrical systems, energy is typically measured in watt-seconds (joules) or kilowatt-hours (kWh): Watt-second (Joule): A watt-second is the amount of energy used when one watt of power is consumed for one second. It’s a direct measure of the energy consumed at a specific moment. Kilowatt-hour (kWh): Commonly used in electricity billing, it measures the energy consumed when 1 kilowatt (1000 watts) is used for one hour. It's a larger-scale measure of energy, useful for looking at consumption over time. 3. Thermodynamics: From the thermodynamic point of view, energy conservation is crucial. In an electrolysis system, electrical energy is converted into chemical energy, which can later be stored or released. This is in line with the first law of thermodynamics (conservation of energy), where the electrical energy used for electrolysis translates into stored chemical potential. I hope this clarifies things!
My friend, this work requires special equipment that can store oxygen and hydrogen under high pressure. Otherwise, this work is dangerous. The best thing is to burn (consume) the produced gas in a burner or any other device.
Of course this is totally legit. Kevin Klein did this like 25 or 30 years ago and it was all over RUclips. Of course his unit was much larger. It looked like a giant welding unit and it was plugged into the wall and the whole funny part about the thing is that he would pour water into it. That was the energy source and what was really interesting is that you could cut through steel with ityou could clean things with it but when you go to put your fingers in the flame, it wouldn’t burn you
Hello, this experiment is real and based on the principles of electrolysis. If you have doubts, I encourage you to try it yourself with the proper equipment. Thank you for sharing your opinion.
Hello! Thank you for sharing your opinion. Safety is one of our top priorities, and we strive to take all necessary precautions in our experiments. If there’s a specific point you think we should consider, I’d love to hear it!
information is on screen is fake he is using in 1st blade plated jarr water and salt and in second jar he used alcohol. You can use petrol, thinner, Alcohol, petroleum oil or Tarpin but safety must.
Thank you for sharing your opinion For your information, dear friend, I would like to inform you that this video is related to water electrolysis and has nothing to do with gasoline, thinner, alcohol or any other combustible materials. In this video, water is decomposed into oxygen and hydrogen by the DC current connected to the blade plates, and it burns at the outlet of the burner and produces a very high temperature.
Both containers are made of polycarbonate and should not be made of glass, because in case of flashback, the glass will be powdered and it is dangerous, and sodium sulfate Na2so4 should be added to the water, not salt, because salt produces dangerous and toxic gases.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
To avoid the risk of a flashback, either a valve or a piece of fabric is required on the circuit.
⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Thank you for your opinion
The gas exit speed from the burner head should be higher than the flame propagation speed
Please give demo piece of fabric flashback accident?
@@creative4979good suggestion by you 🌹🌹🌹🌹
@@creative4979 Mmm... until it isn't. 🤦♂️
This is a Browns gas torch. It is hotter than regular oxyhydrogen because it has a substantial amount of singlet oxygen feeding the burner. This adds an extra 1.3eV of energy per reaction over normal O2 ❤ also your setup should include a flame arrestor or it might flash back and cause a small explosion similar to a large firecracker and wreak your device and possibly injure you 😮
preventing flash back, can you have a brass ball valve ,
when the gas pressure is high it is open nozzle and if there is a flash event occurs it is flashed back towards nozzle hole to cut off gas.
Очень хорошо! Много лишних гаек- они оцинкованные и сгниют, загрязняя электролит. Лучше пластиковые шайбы. И потоньше - влезет больше электродов.
Хочу себе такой электролизер - он такой милый 😊
çok tasarım izledim en iyisi bu TEBRİKLER
What a genius mind :).
Hi . Were good. I am Iranian 🇮🇷 and i am not speak English but were were good ❤❤❤❤
اقلا از ترجمه گوشیت استفاده کن ابرو مملکت رو نبری اخه این چیه نوشتی پدر صلواتی😂
@@Saeedgf3 درود بر شما دوست گرامی
شما که فارسی اینقدر قشنگ مینویسی به زبان فارسی زیر نویس کن یا توضیح بدهید محتوی برای من مهمتر از یادگیری زبان انگلیسی است دوست عزیز همدلی از همزبانی خوشتر است
Liquify the produced H2 at a pressure of 4 - 8 bars in a cylinder safe pressure range 40 bar at STP
In this video, we worked as a laboratory. We use the produced hydrogen and oxygen directly because the accumulation of these gases without special equipment is very dangerous
@@creative4979 with safety measures and increase in flow pressure per unit time of H2, this hho assy can be commercially efficient production unit
Muito bom...
سلام وخسته نباشید اسامی لوازمی که مصرف کردین رو بگید
ชอบดูมากครับ😊
ขอบคุณมาก
Excelente, amigo. Gracias por tu trabajo. Creo que voy a intentar reproducirlo con el doble de placas, a ver si logro un poco más de potencia. Saludos desde Argentina.
Gracias por tu comentario
buena suerte
Super!
Good job ❤
I think this would work nice for small delicate Glass and Metal sculpture
Can it cut or weld glass? It Gotta
😮keren bang, kalau manusia gk butuh makan, buat beli makan butuh duit alias uang.. gw rasa cuma abang ini yg mampu bertahan hidup di mars..🎉
To avoid the Flshback, twist some steel wool so that you get a tiny sausage of 1-2 cm and as thick as the pipe alowes. Put it into the copper pipe right at the front where the flame is.
This way the flames can't flash back. Same principle like a sieve and fire not goig through.
Hope that makes it safer.
Thank you for sharing your opinion
But u didn't show us current consumption
Thank you for your opinion
If you have something in mind, please share it
Selection of electrolyte
And water specific gravity indicator displaying system?
It is better to use stainless steel for the electrolyte.
We used normal water and added 2 cc of battery water, but it is better to use sodium sulfate instead of acid
Dangerous construction. A working construction must be made.
Thank you for your opinion
Our work is limited to a laboratory that only demonstrates the concept and efficiency of electrolysis. And if someone wants to use this process industrially, he must have the necessary standard mechanism
sir, is it legal or not to produce liquid hydrogen at home?
Hello, producing liquid hydrogen at home is generally not legal due to severe safety risks and the need for advanced equipment. Liquid hydrogen has extremely low temperatures and explosive properties, which require controlled industrial or research environments and strict regulations. This process requires specific permits and specialized knowledge. If you're interested in this subject, I recommend learning and experimenting in safe, supervised environments.
Thank you master
i can only watch for 1 minutes, the backsound music is unbearable😖
درود لطفاً ساخت اون ترچ را آموزش بدید سپاسگزارم
ruclips.net/video/Vy-m6f5ipkA/видео.html
ruclips.net/video/RCgW_vFS1Ak/видео.html
I put some of the links for making the torch
Visit the channel to see the making of different types of torches
To prevent the backflash, I would recomend a pipe with metal wool inside the burner.
Thank you for your opinion
In general, in addition to using special tools to prevent flashback, the speed of the flame exiting the burner should be higher than the speed of the flame spreading backwards.
Yes, but it wouldn't eliminate the problem. When you turn of the current, the speed will decrease and you will get the same problem
تبارك الله عليك يأخي المحترام دئمان الجديد مشاء الله عليك ربي يحفظك ويسعدك ويوفقك
شكراً جزيلاً
Are all of your nuts and bolts in the hydrogen / oxygen electrocatalysis tank with the water also stainless steel like the razor blades ?
The correct method is that all parts are made of stainless steel
第一，你應該最少水缸內加入小石春燧石做過濾，防止內爆。First, you should at least add small spring flint to the water tank for filtration to prevent implosion.
Thank you for sharing your opinion
第二，你應該在水裏加入小梳打，增加活性，請把結果跟我分享。Second, you should add a small amount of soda to the water to increase activity. Please share the results with me.
Thank you for your suggestion! While soda water contains dissolved carbon dioxide, which forms a weak carbonic acid and could slightly increase the ion concentration in water, it's not the most efficient choice for electrolysis. In my video, I recommend using sodium sulfate (Na2SO4) as an electrolyte. Sodium sulfate is a much better option because it fully dissociates into sodium and sulfate ions in solution, significantly improving electrical conductivity without producing harmful by-products like chlorine gas, which can occur with sodium chloride. This makes sodium sulfate a safer and more effective choice for optimizing the electrolysis process.
👍👍
Good Demo by you
🚀🚀🚀🚀🚀🚀🚀🚀✔️✔️✔️✔️✔️✔️✔️🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹
Brief introduction please
SUB! Nice!
Wow, luar biasa itu panas nya
How many ampe
нужна титановая иголка
Друг мой, если выходная скорость горелки выше скорости распространения пламени обратно, титановая игла вам больше не понадобится, и добиться этого можно, выбрав головку горелки с небольшим отверстием.
Does it burns a nozzle each time you turn it off ? 🤔
no my friend
I enjoyed seeing this wonderful piece of work. Can you tell me where to purchase the small valve?
@@wou58 Diy only
My friend, you can buy from online stores or you can make it yourself by watching some videos below
ruclips.net/video/Vy-m6f5ipkA/видео.html
ruclips.net/video/RCgW_vFS1Ak/видео.html
ruclips.net/video/Yo0JbwxWM9Q/видео.html
ruclips.net/video/KIX9NWG_c9Q/видео.html
ruclips.net/video/7-CTWhw2_so/видео.html
ruclips.net/video/UBme63D05kI/видео.html
You can find them in aquarium fish stores.
💥💥👏👏👏👏
Geye set bana kar kitne rupe Deng
I wanted to watch it then the goofy rock music started. What the hell does ANY music have to do with splitting water for a hydrogen - oxygen torch?
Your design is remarkable
Write input data
V, I, R, wattage consumed at 12 volt imput
Output
H2 production in cc per second achieved
Water consumption per second???
Digital controller displaying
V, I, R, P, imput
H2 cc /second, water consumption per second
With a inclined Mano meter digitally
I am a retired production technologist , qualified from UET Lahore, Btech Hons graduate, as DCE retired in the field of mfging
Thank you for your opinion
I will definitely pay attention to its quantity in the next series
You can use a piece of bronze wool as a flashback arrestor.
Fantastic, but without knowing where you got the parts to assemble the system, it's like being back at square one.
My friend, which part do you mean exactly?
Use grephite rods😢 from pencil size dry cell 1.2 volt, in stead of steel screws 4 nos used for holding platinum blades,?
Describe current value and energy in kwh / watt second please, very important data explained for you wrt thermodynamics point of view
Thank you for your insightful question!
1. Current (Amperes): The electric current, measured in amperes (A), is the rate of charge flow. It's important because it determines how much electrical energy is being transferred per unit of time.
2. Energy: In electrical systems, energy is typically measured in watt-seconds (joules) or kilowatt-hours (kWh):
Watt-second (Joule): A watt-second is the amount of energy used when one watt of power is consumed for one second. It’s a direct measure of the energy consumed at a specific moment.
Kilowatt-hour (kWh): Commonly used in electricity billing, it measures the energy consumed when 1 kilowatt (1000 watts) is used for one hour. It's a larger-scale measure of energy, useful for looking at consumption over time.
3. Thermodynamics: From the thermodynamic point of view, energy conservation is crucial. In an electrolysis system, electrical energy is converted into chemical energy, which can later be stored or released. This is in line with the first law of thermodynamics (conservation of energy), where the electrical energy used for electrolysis translates into stored chemical potential.
I hope this clarifies things!
@@creative49792:44
နည်းပညာအရမဆိုးပါဘူး ဒါပေမဲ့ အရမ်းအန္တရာယ်များလွန်းတယ် တင်ဆက်မှု့အတွက် အရမ်းကျေးဇူးတင်ပါတယ်
😉👍👍👍
what's the chance of doing this with salt water as one won't want to waste fresh water
You can do something simpler than this using calcium carbide and get an even better result
Резать водородом можно, а паять увы, много окислов
Спасибо за ваше мнение
Хорошо подходит для сварки бронзы.
Železo be z primontovania sytiča plameňa na jeho úpravu propan-butanom na redukčný plameň, iste sa nedá. Ale zlaté šperky áno.
I guess it's time for government to enter bro's house😂
Öneli olan elektronik besleme akıma kaçıyor.
👍🏻
btw meledak gk sih.. setahu gw H2O klo dipecah jadi hidrogen + oksigen,, hidrogen kena tetesan aer meledak.. itu hiroshima khen?
جالبه اما از کپسول استفاده کنی راحتتره منو یاد کاردستی‌های زندان انداخت
Please separate oxygen and hydrogen
Is there a way to inject more oxygen into the system via an air pump? , your project is missing the flame enrichment liquid.
My friend, this work requires special equipment that can store oxygen and hydrogen under high pressure. Otherwise, this work is dangerous. The best thing is to burn (consume) the produced gas in a burner or any other device.
Of course this is totally legit. Kevin Klein did this like 25 or 30 years ago and it was all over RUclips. Of course his unit was much larger. It looked like a giant welding unit and it was plugged into the wall and the whole funny part about the thing is that he would pour water into it. That was the energy source and what was really interesting is that you could cut through steel with ityou could clean things with it but when you go to put your fingers in the flame, it wouldn’t burn you
Please give a simple diagram for your fellow Brothers all over the world that are being suffer by this energy power
Listo para guardar en el cajon de los fracasos
🤣🤣🤣🤣
how much watt you consume
cool design, untill we hear that the guy that created this was assassinated for this...
это пособие как не надо делать электролизер тут нарушены все правила
Спасибо за ваше мнение
Если у вас есть идея, мы приветствуем ее
I went thes
fake😂
Hello, this experiment is real and based on the principles of electrolysis. If you have doubts, I encourage you to try it yourself with the proper equipment. Thank you for sharing your opinion.
Čo Ti je fájke? Doma si staviam podľa osvedčeného návodu 1kW aparát!
👎👎👎👎👎ALL BLADES SHOULD BE ISOLATED. THIS PERSON MAKING US FOOL
Hello! Thank you for sharing your opinion. Safety is one of our top priorities, and we strive to take all necessary precautions in our experiments. If there’s a specific point you think we should consider, I’d love to hear it!
information is on screen is fake he is using in 1st blade plated jarr water and salt and in second jar he used alcohol. You can use petrol, thinner, Alcohol, petroleum oil or Tarpin but safety must.
Thank you for sharing your opinion
For your information, dear friend, I would like to inform you that this video is related to water electrolysis and has nothing to do with gasoline, thinner, alcohol or any other combustible materials.
In this video, water is decomposed into oxygen and hydrogen by the DC current connected to the blade plates, and it burns at the outlet of the burner and produces a very high temperature.
Both containers are made of polycarbonate and should not be made of glass, because in case of flashback, the glass will be powdered and it is dangerous, and sodium sulfate Na2so4 should be added to the water, not salt, because salt produces dangerous and toxic gases.
Дислайк за рекламууууу ставим везде