Reviving a Rear-Ended GAC Aion: Returning to Factory Fresh in Under 3000 Kilometers!

Поделиться
HTML-код
  • Опубликовано: 23 ноя 2024
  • НаукаНаука

Комментарии • 179

  • @aidanbeauchamp9588
    @aidanbeauchamp9588 8 месяцев назад +3

    A true artist at his craft! You give me the motivation to fix my bodywork now that my car drives again

    • @xinxianshi
      @xinxianshi  8 месяцев назад +2

      That's fantastic to hear! It's inspiring when skilled professionals showcase their expertise and craftsmanship, motivating others to take on their own projects. Remember to prioritize safety and follow best practices when working on bodywork or any automotive repairs. If you have any specific questions or need guidance on your project, feel free to ask.

  • @sharthun2009
    @sharthun2009 Год назад +6

    I love watching skilled technician's practice their craft.

    • @larrysimon1
      @larrysimon1 11 месяцев назад +1

      Are you stupid !

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      That's fantastic to hear, @sharthun2009! Skilled technicians indeed showcase an impressive level of expertise in their craft. If there's anything specific you enjoy or if you have any questions about the work you're watching, feel free to share. We appreciate your interest! 👍😊

    • @larrysimon1
      @larrysimon1 11 месяцев назад

      @@xinxianshi You are dangerous and stupid !

  • @Kinsanth_
    @Kinsanth_ Год назад +1

    Can we appreciate it more, that those people are in some way miracleworkers? Its so faszinating to watch how a partially crumpled car gets back to its former glory. Those people need a raise.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Absolutely! The skill and craftsmanship demonstrated by auto repair professionals, especially in challenging cases where a damaged car is restored to its former condition, are indeed impressive. It requires a combination of experience, knowledge, and attention to detail to perform such intricate repairs. These professionals play a crucial role in extending the lifespan of vehicles, reducing waste, and providing cost-effective solutions for car owners. A shout-out to their expertise and dedication!

  • @TAKU5150MEGU
    @TAKU5150MEGU 10 месяцев назад +2

    モノコックボディの構造をしっかり把握されてますね!素晴らしいです。

    • @xinxianshi
      @xinxianshi  10 месяцев назад +1

      ありがとうございます!モノコックボディの構造についての理解は、高度な自動車修理やリビルド作業において非常に重要です。

  • @murtadahhasan6329
    @murtadahhasan6329 Год назад +3

    Hello my friend I hope you fine and good health I see this video good repair it’s become like new also the gaps and paint coating under car very nice thanks again for this video ( Kuwait 🇰🇼)

    • @xinxianshi
      @xinxianshi  Год назад +1

      Hello, my friend! Thank you for your kind words. I'm doing well, and I'm glad to hear that you enjoyed the video. We appreciate your support and feedback. If you have any more comments or questions, feel free to share. Good health to you too! 🇰🇼😊👍

  • @proudveteran4696
    @proudveteran4696 Год назад +3

    Han, you have a skill like the finest surgeon

    • @xinxianshi
      @xinxianshi  Год назад

      Thank you for the kind words! Han's skill and expertise are truly impressive, and it's wonderful to hear that you liken his work to that of a fine surgeon. If you have any more comments or questions, please feel free to share. Your feedback means a lot to us! 👨‍🔧👍😊

  • @rolfschmidt9488
    @rolfschmidt9488 Год назад +3

    Super Arbeit der Junge ist echt gut, habe daß früher auch gemacht als ich noch Jung war! Aber in den 80er Jahren waren die Autos noch stabiler, da waren die Reparaturen schwieriger weil alles sehr Massiv war!

    • @xinxianshi
      @xinxianshi  Год назад

      Ja, die Arbeit von Mechaniker Han wird oft gelobt. Es ist interessant zu hören, dass Sie in den 80er Jahren ähnliche Reparaturen durchgeführt haben. Die Struktur der Autos hat sich sicherlich im Laufe der Jahre verändert. Wenn Sie weitere Fragen haben oder über Ihre Erfahrungen sprechen möchten, stehe ich zur Verfügung!

  • @geoffreymandzuk5708
    @geoffreymandzuk5708 11 месяцев назад

    The gentle touch of a blacksmith...

  • @bishbashbosh-j6z
    @bishbashbosh-j6z 11 месяцев назад +1

    All in a day's job. Han is da man.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Skilled professionals like Han play a crucial role in the automotive repair industry, showcasing expertise and dedication in their work. If you have any more thoughts or if there's anything specific you'd like to discuss, feel free to let me know!

  • @21Colossus
    @21Colossus 10 месяцев назад +1

    This man is a genius !

  • @legioner9
    @legioner9 Год назад +9

    I immediatly press like, and only after that I start to watch your videos. 😅 You do well 🤗

    • @xinxianshi
      @xinxianshi  Год назад +2

      Thank you for your support and the "like"! We're thrilled that you enjoy our videos, and we appreciate your kind words. If you ever have any comments or questions while watching, feel free to share them. Your feedback means a lot to us, and we're happy to have you as part of our community! 😊👍📺👏

    • @legioner9
      @legioner9 Год назад

      @@xinxianshi Thank you 🤗

    • @datoidrisov2035
      @datoidrisov2035 Год назад

      mepĺ.
      mmmmmmmmmmmmmmm

  • @tonimuhlbauer6576
    @tonimuhlbauer6576 11 месяцев назад

    Endlich mal ein Karosseriebauer, der sein Handwerk versteht. Ich hätte es nicht besser machen können. Mach weiter so😁👌

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Es freut mich zu hören, dass Sie die Fähigkeiten und das Handwerk des Karosseriebauers schätzen! Positive Anerkennung kann eine Quelle der Motivation sein. Wenn Sie weitere Anmerkungen haben oder noch etwas besprechen möchten, lassen Sie es mich einfach wissen. Ich stehe zur Verfügung! 😊👍

  • @tomriedel3964
    @tomriedel3964 Год назад +1

    Ein Meister seines Fachs.....von Blecharbeiten bis Lackieren .....guter Mann

    • @xinxianshi
      @xinxianshi  Год назад +1

      Ja, es scheint, dass der Handwerker über ein breites Spektrum von Fähigkeiten verfügt, sowohl in Bezug auf Blecharbeiten als auch auf Lackieren. Es ist beeindruckend zu sehen, wie Fachleute ihre Fähigkeiten in verschiedenen Aspekten der Fahrzeugreparatur demonstrieren können.

  • @berniesoprano6980
    @berniesoprano6980 11 месяцев назад +1

    What’s even more impressive is that he was able to do this in 14:23.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      What’s even more impressive is that he was able to do this in 14:23.

  • @gilpaulistamiranda9812
    @gilpaulistamiranda9812 Год назад +2

    Parabéns pelo trabalho aí sim em Qualidade de trabalho e dedicação.

    • @xinxianshi
      @xinxianshi  Год назад

      Muito obrigado pelos seus parabéns! Se você tiver alguma outra dúvida ou precisar de ajuda, sinta-se à vontade para me avisar.

  • @Hojesimbr
    @Hojesimbr Год назад +2

    Satisfatório ver um profissional executando seu trabalho com maestria.

    • @xinxianshi
      @xinxianshi  Год назад

      É realmente gratificante observar um profissional habilidoso em ação, não é mesmo? A maestria e a dedicação de especialistas em reparos automotivos podem ser verdadeiramente impressionantes. Se houver mais alguma coisa que você gostaria de discutir ou se tiver alguma pergunta específica, estou à disposição para ajudar! 🚗🔧😊

  • @samuelreyes2467
    @samuelreyes2467 11 месяцев назад +1

    It's amazing, no eye protection throughout the whole process especially during welding that's crazy.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      You've raised a critical safety concern. Indeed, proper eye protection, especially during welding, is crucial to safeguard against potential hazards such as intense light, sparks, and debris. It's essential for anyone involved in such tasks to prioritize their safety by using the necessary personal protective equipment (PPE).

  • @Sebastian-Pereiro.
    @Sebastian-Pereiro. Год назад +4

    приятно смотреть на мастеров своего дела👍

    • @xinxianshi
      @xinxianshi  Год назад +1

      Спасибо за вашу добрые слова! Мастера своего дела всегда вдохновляют и восхищают своим профессионализмом. Если у вас есть еще какие-либо комментарии или вопросы, не стесняйтесь делиться ими. Ваша поддержка важна для нас! 👍😊🔧

    • @monarh474
      @monarh474 Год назад

      Скажите, металл автомобиля такой тонкий или так кажется из-за видео?

  • @glynmoore3730
    @glynmoore3730 11 месяцев назад

    Mesmerising to watch the skills

  • @lionandthelamb2907
    @lionandthelamb2907 Год назад +2

    That is very impressive. Great job!

  • @palgo47l5
    @palgo47l5 Год назад +2

    Increíble!! Magnífico trabajo 👏👏👏👏👏

    • @xinxianshi
      @xinxianshi  Год назад

      ¡Gracias por tus palabras positivas! Es genial saber que encuentras el trabajo magnífico. Si tienes más comentarios o preguntas, estaré encantado de ayudar. ¡A seguir disfrutando del increíble trabajo de reparación automotriz! 🚗🔧👏😊

  • @86滑走団
    @86滑走団 Год назад +1

    とてもスピーディーな作業で驚きました。たいてい1日あれば車って直るんですね。

    • @xinxianshi
      @xinxianshi  Год назад

      動画内の修理プロセスはタイムラプスで進行されているため、実際の修理時間は1日ではない可能性があります。修理にかかる時間は修理の複雑さ、必要な作業の種類、修理専門家のスキルなどによって異なります。ただし、このような修理が迅速に行われることがあります。

  • @celsogimenes8924
    @celsogimenes8924 Год назад +4

    Dá gosto de ver tamanho profissionalismo, Parabéns.

    • @xinxianshi
      @xinxianshi  Год назад

      Obrigado pelos seus amáveis ​​comentários! É sempre um prazer ver o profissionalismo em destaque. Se tiver mais comentários ou perguntas, sinta-se à vontade para compartilhá-los. Seu apoio é muito apreciado! 👏👍😊

  • @jeannegou012
    @jeannegou012 Год назад +2

    へこんでしまったボディから元の状態に戻ったのはすごいです。

    • @xinxianshi
      @xinxianshi  Год назад

      そのコメントをありがとうございます!ボディがへこんでしまった車を元の状態に戻す作業は確かに印象的です。プロの修理作業は素晴らしい成果を生み出します。もし質問やコメントがありましたら、お気軽にお知らせください。あなたのフィードバックは大変嬉しいです!🚗🛠👍

  • @celsoguajardovillarreal
    @celsoguajardovillarreal Год назад

    Excelente trabajo !!! Saludos desde Apodaca Nuevo Leon Mexico.

    • @xinxianshi
      @xinxianshi  11 месяцев назад +1

      Thank you so much for your support and kind words! Greetings to you in Apodaca, Nuevo Leon, Mexico. If you have any questions or if there's anything specific you'd like to see on the channel, feel free to let us know. We appreciate your subscription!

    • @celsoguajardovillarreal
      @celsoguajardovillarreal 11 месяцев назад

      @@xinxianshi gracias. saludos

  • @carloscamacho1605
    @carloscamacho1605 Год назад +1

    Saludos desde Argentina exelente trabajo colega

    • @xinxianshi
      @xinxianshi  Год назад

      ¡Saludos desde Argentina! Muchas gracias por tus amables palabras. Es un placer recibir tu apoyo y saber que aprecias el trabajo. Si tienes alguna pregunta o deseas compartir más comentarios, no dudes en hacerlo. ¡Un abrazo! 🇦🇷👍😊

  • @the_trailer2737
    @the_trailer2737 Год назад

    Saludo desde República Dominicana 🇩🇴 bendiciones buen contenido

    • @xinxianshi
      @xinxianshi  Год назад

      🇩🇴 Gracias por tus amables palabras y bendiciones. Estamos encantados de saber que disfrutas del contenido. Si tienes más comentarios o preguntas en el futuro, no dudes en compartirlos. ¡Tus buenos deseos son muy apreciados! 😊👍🌴

  • @wwiewolle5849
    @wwiewolle5849 Год назад +3

    Bravo, a very nice job!👌👍

    • @xinxianshi
      @xinxianshi  Год назад +1

      Thank you very much! We appreciate your kind words and support. If you have any more comments or questions, feel free to share. Your feedback means a lot to us! 👍😊👏

  • @jozekpusnik4868
    @jozekpusnik4868 Год назад

    Legend..hello from Slovenia👏👍

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Hello from Slovenia! 🌍👋 Thank you for the kind words! If you have any questions or if there's anything specific you'd like to know or discuss, feel free to let me know.

  • @autodentertv6425
    @autodentertv6425 Год назад +4

    Very nice ❤

  • @hasan-b6b
    @hasan-b6b Год назад +1

    Очин курута Брат 🫵💥 Удачи тибя

  • @yokapok6490
    @yokapok6490 Год назад +3

    je visionne chaque vidéo, a chaque fois les chocs sont très importants , j'ai remarqué que les vehicules ne sont jamais mis sur un marbre afin de vérifier l'alignement de la caisse .

    • @xinxianshi
      @xinxianshi  Год назад

      Merci beaucoup pour votre soutien continu, @yokapok6490 ! Nous apprécions vos commentaires et votre engagement envers nos vidéos. Votre observation sur l'alignement de la carrosserie est pertinente. L'utilisation d'une table de marbre pour vérifier l'alignement de la carrosserie est une étape importante dans de nombreuses réparations de véhicules. Cela peut être nécessaire pour garantir que le véhicule est en parfait état. Merci d'avoir partagé vos réflexions, et nous continuons à nous efforcer d'améliorer nos vidéos. 😊🚗🔧

    • @yvesmicrocha
      @yvesmicrocha Год назад

      @@xinxianshi Au final...vous ne passez pas les véhicules sur le marbre !!!

  • @reginaldsmith7897
    @reginaldsmith7897 11 месяцев назад +2

    ✊🏿🔥✊🏿🔥✊🏿

  • @krekautofunilaria8730
    @krekautofunilaria8730 Год назад

    Top dás galáxia ótimo trabalho parabéns...

    • @xinxianshi
      @xinxianshi  Год назад

      Obrigado pelos seus amáveis ​​comentários e apoio! Estamos felizes em saber que você aprecia o trabalho. Se tiver mais comentários ou perguntas, sinta-se à vontade para compartilhá-los. Seu feedback é valioso para nós! 👍🌌🚗😊

  • @eNKa007
    @eNKa007 Год назад

    Frame made of can metal sheet. Quality in itself

    • @xinxianshi
      @xinxianshi  11 месяцев назад +1

      It sounds like you're expressing concern about the frame being made of thin or low-quality metal sheet. The structural integrity of a vehicle's frame is crucial for safety and performance.

    • @eNKa007
      @eNKa007 11 месяцев назад

      @@xinxianshi Yeap. I recall when tried to drill in Mazda to mount something underneath. 2-3 drill bits per drill with additional sharpening. It was a nightmare to drill in 1800 MPa steel

  • @MdAsrafRaza-dk6vu
    @MdAsrafRaza-dk6vu 9 месяцев назад

    Nice work bro ❤❤❤

    • @xinxianshi
      @xinxianshi  9 месяцев назад

      Thank you! I'm glad you appreciate the work! 🚗🔧✨

  • @chrisplace3024
    @chrisplace3024 Год назад +2

    I do not know how you do not go blind.

    • @xinxianshi
      @xinxianshi  Год назад

      Working on tasks that involve intense light, like welding, can indeed strain the eyes and even cause damage if proper safety measures are not taken. Professional welders use specialized protective gear, including welding helmets with darkened visors, to shield their eyes from the bright light and harmful UV rays. It's essential to prioritize eye safety when engaging in such work. Thank you for your concern and comment. 😎🔥👷‍♂️

    • @jon-kp2rq
      @jon-kp2rq Год назад

      bedwetters wear masks!!

  • @ady007pl
    @ady007pl Год назад +3

    how long did it take to do this work?

    • @Жопашник
      @Жопашник Год назад +1

      Ну видно же, что всего 15 минут

    • @xinxianshi
      @xinxianshi  Год назад +1

      The restoration of this car took almost a week to complete. Of course it can be done faster, if necessary, the repair can be done in four days

  • @jorgestival6994
    @jorgestival6994 Год назад +2

    Serviço de qualidade parabéns amigão

    • @xinxianshi
      @xinxianshi  Год назад +1

      Muito obrigado pela apreciação do serviço de qualidade! Valorizamos o seu apoio e feedback positivo. Se tiver mais comentários ou perguntas, não hesite em partilhá-los. O seu feedback é muito importante para nós! 👍😊🔧🚗

  • @davidgalietti3398
    @davidgalietti3398 Год назад +3

    Wait.. youtube allows videos that show bodywork being done correctly?

    • @xinxianshi
      @xinxianshi  Год назад +1

      Yes, RUclips allows videos that demonstrate bodywork being done correctly. Many channels on RUclips focus on automotive repair, restoration, and customization, showcasing various aspects of the process, including bodywork. These videos can serve as educational content for enthusiasts, professionals, or anyone interested in learning about automotive repairs. RUclips's community guidelines prohibit content that promotes dangerous activities, but educational and skill-demonstration videos are generally allowed. If you have any specific concerns or questions, feel free to share them.

  • @donchristianson3153
    @donchristianson3153 11 месяцев назад

    Am an old geared head and have done projects like this , this guy may be young but he is a true craftsman!!!!!!! Hats off to ya !!!!!! That car would have been totaled in the U S. You could make a lot of money here ,ya can buy wrecks like that one reL cheap ,like $500 at the insurance auctions !!! After the job you did you could get$20000 or more easily !!!!!!!!

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      It's great to hear that you appreciate the craftsmanship displayed in the project! Skilled individuals who can successfully undertake complex automotive restoration projects are indeed valuable in the industry.
      Your observation about the potential profitability of such projects in the U.S., where buying salvage cars at auctions and restoring them can yield a significant return, is spot on. The skill and effort put into restoring a car can substantially increase its value.

  • @tacoma2256
    @tacoma2256 8 месяцев назад +2

    👍🏻👍🏻

  • @actonman7291
    @actonman7291 Год назад +2

    How many hours this whole repair takes?

    • @xinxianshi
      @xinxianshi  Год назад +2

      The restoration of this car took almost a week to complete. Of course it can be done faster, if necessary, the repair can be done in four days

  • @piotrgleba2830
    @piotrgleba2830 Год назад +2

    Już widzę jak diagnosta SKP przepuszcza takie coś co ma tylną podłużnicę złożoną z dwóch kawałków...

    • @michalbry8807
      @michalbry8807 Год назад

      Dramat. Chiński lepiarz robi wszystko "na oko" na tym filmie co widać w efektach końcowych, np. po szczelinach zderzaka. Najzabawniejsze, że ludzie tu wyją z podziwu🤣.

  • @franciscowashington2155
    @franciscowashington2155 Год назад +1

    Beleza muito bom ficou incrível 👍👍👏👏🇧🇷🇧🇷

  • @КонстантинКоролев-й6и

    Супер мага мега спорт. Только не понятно почему при таких повреждениях не проверяет геометрию кузова 🤔

    • @xinxianshi
      @xinxianshi  Год назад

      Отличный вопрос! Геометрия кузова действительно важна после таких серьезных повреждений. Возможно, в процессе монтажа и рихтовки это также проверялось, но в видеоролике не было подробного показа этого этапа.

  • @jerrydelyea5820
    @jerrydelyea5820 11 месяцев назад

    Ok. About bad but….. No weld through prime before welding? Also welding through paint? This will cause lots of porosity’s in the welds leading to early rust.

    • @xinxianshi
      @xinxianshi  11 месяцев назад +1

      What you mentioned is an important observation. Weld-through primer is applied before welding to prevent oxidation caused by the heat generated by welding and to improve the corrosion resistance of the weld. Additionally, welding through paint or plating can cause porosity in the weld area, which can accelerate the risk of rust.
      Ensuring proper preparation before welding, including using a welding primer and removing paint or coatings from the welding area, can help improve the quality and durability of the weld.

  • @slome4467
    @slome4467 Год назад +1

    Good job no stupid music I like hummer and tool sound its my music 🎉🎉🎉

    • @xinxianshi
      @xinxianshi  Год назад

      I'm glad to hear that you enjoyed the video without distracting music! The sound of the tools and the process itself can indeed be quite satisfying to many viewers. It's all about personal preference, and it's great that you found the video appealing. If you have more comments or questions in the future, feel free to share. Your feedback is much appreciated! 🛠️🚗👍😊🎶

  • @Yorkie285
    @Yorkie285 Год назад

    Boy, those Korean's sure know what they are doing.

    • @cocoaiscool2709
      @cocoaiscool2709 Год назад

      but isn’t he chinese ?

    • @xinxianshi
      @xinxianshi  Год назад

      It's great to see recognition for their expertise and achievements in the automotive world. If you have more comments or questions, feel free to share. Your insights are valued! 🚗

    • @xinxianshi
      @xinxianshi  Год назад +2

      Yes, we are Chinese, but it is difficult for Westerners to understand Asian faces, which often causes some misunderstandings, but it does not matter, as long as he likes the video content

  • @alexandrealmeida2932
    @alexandrealmeida2932 Год назад

    Bom trabalho de reparo.

  • @Tricolor610
    @Tricolor610 Год назад +1

    Perfekt 👌

  • @gsantimaria
    @gsantimaria Год назад +1

    Bravo

  • @AdamCichanowski
    @AdamCichanowski Год назад +1

    Gdzie ochrona osobista. Spawasz to sie zaslon. Pozdrowienia od spawacza z europy srodkowiej😊😊😊

    • @xinxianshi
      @xinxianshi  Год назад

      Rozumiem, że zwracasz uwagę na brak ochrony osobistej, takiej jak maska spawalnicza, podczas spawania. To ważne, aby stosować właściwe środki bezpieczeństwa podczas prac spawalniczych, aby chronić się przed promieniowaniem UV i innymi potencjalnymi zagrożeniami.

  • @matimac-man9799
    @matimac-man9799 Год назад +1

    11:00 was ist das für ein Zeug?Wo bekommt man das her ?

    • @xinxianshi
      @xinxianshi  Год назад

      Das Werkzeug, das er verwendet, nennt sich Druckluft-Klebepistole. Sie können es in einem Werkzeuggeschäft oder einem Baumarkt kaufen. Es handelt sich um ein ziemlich übliches Werkzeug, das normalerweise zur Auftragung von Klebstoffen, Dichtungsmassen usw. verwendet wird. Wenn Sie eines kaufen möchten, können Sie dies in Ihrem örtlichen Werkzeuggeschäft oder bei einem Werkzeuganbieter tun. Ich hoffe, das hilft Ihnen weiter!

  • @OldsmobileCutlassSupremeConver
    @OldsmobileCutlassSupremeConver 11 месяцев назад +1

    Everything is great except no Safety Glasses, or proper welding eye wear.
    It's easy when you're young.
    It'll catch up w you.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Your concern for safety is commendable. Indeed, safety glasses or proper welding eye protection are essential when undertaking tasks like welding to protect the eyes from intense light, sparks, and debris.
      Emphasizing the importance of using personal protective equipment (PPE) is crucial for preventing potential hazards. It's true that safety practices are vital for both immediate and long-term well-being.

  • @direktorada8908
    @direktorada8908 8 месяцев назад +1

    привет.можно ли к вам приехать из России научиться?

    • @xinxianshi
      @xinxianshi  8 месяцев назад

      Здравствуйте, к сожалению, на данный момент у нас нет планов по набору международных стажеров. Мы будем очень рады, если вы присоединитесь к нам, когда появится такая возможность в будущем. Пожалуйста, продолжайте обращать внимание на наш канал.

  • @tdclymore
    @tdclymore Год назад +1

    What is in the spray can?

    • @xinxianshi
      @xinxianshi  Год назад

      Hello, I spray cavity anti-corrosion wax, which is a common car maintenance operation. The purpose of cavity wax spraying is to form a protective coating in hard-to-reach areas such as vehicle cavities, skirts, beams, etc. to prevent corrosion and protect the body.

    • @tdclymore
      @tdclymore Год назад

      Thank you sir. You do excellent work.@@xinxianshi

  • @pranavjass5047
    @pranavjass5047 Год назад +1

    I am interested to work with you please take me I have a lot to learn from you 🙏🏻

    • @xinxianshi
      @xinxianshi  Год назад

      I appreciate your enthusiasm! If you're interested in the automotive repair and restoration field, consider reaching out to professionals or workshops in your local area. You can gain valuable experience through apprenticeships or by enrolling in relevant training programs. Best of luck with your endeavors!

  • @familiaagudelo7647
    @familiaagudelo7647 9 месяцев назад +1

    Excelente ver y goog.

    • @xinxianshi
      @xinxianshi  9 месяцев назад

      ¡Gracias por tu comentario positivo!

  • @conanconanian451
    @conanconanian451 Год назад

    good work. but please start using ear protection.

    • @xinxianshi
      @xinxianshi  Год назад

      Your concern for the worker's safety is valid. Hearing protection, such as earplugs or earmuffs, is crucial when working in environments with loud noise, such as those found in automotive repair and metalworking shops. Prolonged exposure to high levels of noise can lead to hearing damage or loss over time.

  • @oskosknextime6883
    @oskosknextime6883 Год назад +1

    ... po choooj ten kaganiec na pysku ?

    • @xinxianshi
      @xinxianshi  Год назад

      Przepraszam, ale nie jestem pewien, o co dokładnie pytasz. Czy mógłbyś udzielić więcej informacji lub wyjaśnić swoje pytanie? Chętnie pomogę, jeśli tylko mi to umożliwisz.

    • @oskosknextime6883
      @oskosknextime6883 Год назад

      @@xinxianshi This is fraud obrazki.elektroda.pl/3524733400_1698600429.jpg

  • @quiphanvan3116
    @quiphanvan3116 Год назад

    Rất hay thật tuyệt vời ❤❤❤❤❤❤

  • @PO6OKOHb
    @PO6OKOHb 11 месяцев назад

    У нас бы вытянули, поставили бампер, и на продажу)

  • @Ephbaum
    @Ephbaum 11 месяцев назад

    My first question is, why? If this was India, that would be one thing. I feel sorry for whoever winds up with this thing and gets into another wreck. Obviously they don't have CarFax.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Your concern is valid, and it raises important points about transparency in the repair process and the potential impact on safety. In some cases, the decision to repair a heavily damaged vehicle may be influenced by factors like cost and availability of replacement parts.
      It's crucial for consumers to have access to detailed repair histories, and platforms like CarFax play a significant role in providing such information. Transparency in the automotive industry helps buyers make informed decisions about the vehicles they consider purchasing.

  • @여호수
    @여호수 Год назад +1

    중국차인가요? 백패널이나 리어프레임에 고강도스틸을 사용하지 않았은거 같은데..?

  • @_Arovin
    @_Arovin Год назад

    Da können sich die Werkstätten in Österreich mal was abschauen. Bei uns nennt man die Leute Mechaniker, können aber nur Teile austauschen. Repariert wird selten was. Verlangen aber Meister-Preise.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Vielen Dank für Ihren Kommentar. Es tut mir leid zu hören, dass Sie mit den Werkstätten in Österreich negative Erfahrungen gemacht haben. Es ist frustrierend, wenn man den Eindruck hat, dass Reparaturen nicht richtig durchgeführt werden, besonders wenn die Kosten hoch sind.
      Es gibt natürlich viele hochqualifizierte und engagierte Mechaniker in Werkstätten, die ihre Arbeit sorgfältig und professionell ausführen. Dennoch kann es Unterschiede in der Qualität der Arbeit und im Service geben.

  • @НиколайФроленко
    @НиколайФроленко Год назад +1

    У меня такое чувство 🤨что машина с конвейера сразу же к жестянщикам попала 🤨, Уж сильно она чистая и герметик как новый 🤔

    • @xinxianshi
      @xinxianshi  Год назад

      Похоже, что мастер проводит отличную работу восстановления автомобилей, делая их чистыми и герметичными, как новые. Это может быть результатом высококачественных навыков и профессионализма. Если у вас есть дополнительные вопросы или комментарии, не стесняйтесь делиться ими!

    • @НиколайФроленко
      @НиколайФроленко Год назад

      @@xinxianshi За мастерство восстановления кузавщины Мастер молодец 👏. А вот то что машина чистая , герметик в идеале и даже вибро изоляция в ванночке под запаской не потёртая , вот это странно .

  • @badaro25
    @badaro25 Год назад +2

    Viciado nesses vídeos

    • @xinxianshi
      @xinxianshi  Год назад +1

      É ótimo saber que você gosta dos vídeos! Apreciamos o seu apoio e entusiasmo. Se tiver mais comentários ou perguntas, sinta-se à vontade para compartilhá-los. Continuaremos a trazer conteúdo interessante para você. 👍😊🎥

  • @TheFurettomagico
    @TheFurettomagico Год назад +1

    al prossimo tamponamento la lamiera gia debole si deformerà ancora di piu, con il rischio per eventuali passeggeri dietro....

    • @xinxianshi
      @xinxianshi  Год назад +1

      Le tue preoccupazioni sulla sicurezza sono giustificate. La lamiera danneggiata potrebbe non offrire la stessa resistenza strutturale di una lamiera originale e potrebbe comportare rischi in caso di futuri incidenti. È importante che le riparazioni mantengano gli standard di sicurezza strutturale del veicolo.

  • @pakalolo6765
    @pakalolo6765 Год назад +1

    no welding mask! 😨😨

  • @АлександрМартынюк-ц9й
    @АлександрМартынюк-ц9й 11 месяцев назад

    А ты виброизоляцию на клеил?

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Нет, мы не стали добавлять в него виброизоляцию, а просто восстановили его в том виде, в каком он был поставлен с завода.

  • @BillMulholland1
    @BillMulholland1 Год назад +1

    👍

  • @howardsen666
    @howardsen666 Год назад +1

    👍🏽

  • @hola-rr5ru
    @hola-rr5ru Год назад +3

    I don't recommend it
    The correct welding method is spot welding application.
    The welding method in the video cannot ensure appropriate rigidity.

    • @xinxianshi
      @xinxianshi  Год назад

      Your observation is valid. The welding method used in the video may not follow standard repair procedures recommended by vehicle manufacturers. Spot welding is a common and preferred method in the automotive industry for joining panels and ensuring appropriate rigidity and structural integrity. Deviating from manufacturer-recommended repair methods can compromise the safety and performance of the vehicle. It's important to adhere to industry standards and follow proper repair techniques for the best results and safety.

    • @andrazlogar861
      @andrazlogar861 11 месяцев назад

      So why are you doing it wrong then?

  • @widely06
    @widely06 Год назад +1

    Video impossibile da guardare per quanta pubblicità c'è

    • @xinxianshi
      @xinxianshi  Год назад

      Mi dispiace per l'inconveniente legato alla pubblicità. RUclips gestisce la distribuzione degli annunci nei video, ma capisco che può risultare fastidioso.

    • @widely06
      @widely06 Год назад

      @@xinxianshi si peró quando un video di 10 min. arriva a durare 6-7 min si esagera, gli utenti vengono danneggiati e comincia a non funzionare più.
      Naruralmente è RUclips che dovrebbe capirlo!
      Il troppo stroppia sempre!

  • @Berik-g2c
    @Berik-g2c Год назад

    😍😍👍👍👍👍👍👍👏👏👏👏👏👏

  • @Kinsanth_
    @Kinsanth_ Год назад

    How much worth is your car? 45k . We repair your car with 2-3k price and its like new again. What? Thats insane. A real bargain. How do you do it? Watch and learn ...

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      We would like to express our gratitude to you for your recognition of our ability to restore your vehicle to its pre-accident condition. We are dedicated to providing professional technology and high-quality craftsmanship. If you have any questions or need further consultation, please feel free to contact us at any time.

    • @Kinsanth_
      @Kinsanth_ 11 месяцев назад

      @@xinxianshi i am good. Your work is really special, shows, you care about the environment and the reusability of a vehicle, which otherwise would be deemed "totalled". Your work should really be way more appreciated, the final results speak for itself

  • @Cardo989
    @Cardo989 Год назад +1

    Ремонт на глаз😂😂😂😂

    • @xinxianshi
      @xinxianshi  Год назад

      Понимаю ваш комментарий, @Cardo989! Иногда в роликах о ремонте автомобилей может показаться, что работу выполняют без формальных измерений или инструментов. Тем не менее, профессиональные автомеханики и мастера часто обладают большим опытом, что позволяет им проводить оценку и ремонт с большой точностью, иногда даже "на глаз". На практике они, конечно, используют измерительные инструменты и рекомендации производителей автомобилей, чтобы гарантировать качество ремонта. Спасибо за ваш комментарий!

  • @gregj7916
    @gregj7916 Год назад +1

    Good effort, get some safety glasses before a metal splint gets you….

    • @xinxianshi
      @xinxianshi  Год назад

      Your concern for safety is valid. It's essential to prioritize safety while working with metal to prevent any potential injuries. Safety glasses or goggles are crucial to protect the eyes from metal splinters, sparks, or any other debris. It's important for individuals involved in such work to use the appropriate personal protective equipment (PPE) to ensure their well-being.

  • @TheNopsen
    @TheNopsen 11 месяцев назад

    Złom .

  • @Robinallenyukon
    @Robinallenyukon 11 месяцев назад +2

    this will fold like an accordion next time ... don't be fooled ... car companies spend million designing crumple zones !

    • @jayrom6237
      @jayrom6237 11 месяцев назад

      No it won't clown he re did with new panels

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      You raise a valid concern. The structural integrity of a vehicle, especially after significant repairs, is crucial for safety. Car manufacturers indeed invest heavily in designing crumple zones to absorb and distribute impact energy during a collision. While the repair showcased in the video may address visible damage, there could be underlying issues affecting the vehicle's ability to absorb impact effectively. It's essential for repairs to meet safety standards and preserve the original design's safety features.

  • @02t66
    @02t66 Год назад

    見た目は直っているが、ボディの剛性は完全に失われている
    事故の衝撃の吸収はもちろん、シャフトやそのほかの部品のゆがみは
    完全に直るものでもない 国産車の買い替えもまた止めたほうがいい

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      ご意見ありがとうございます。ボディの剛性や構造の変化は、事故修理がきちんと行われなかった場合に問題となります。衝撃吸収や車体の剛性の喪失が安全性に悪影響を与える可能性があります。
      国産車の買い替えを検討することは、新しい車両で安全性や信頼性を確保する上で良い判断かもしれません。ただし、修理の品質は修理工場や技術者のスキルに大きく依存します。信頼性のある修理工場で修理が行われれば、車両の安全性を確保できる可能性もあります。
      もし質問や特定のトピックについてお知りになりたいことがあれば、お気軽にお知らせください。

  • @jasonswift7098
    @jasonswift7098 4 месяца назад

    very poor quality job.

  • @ПапаОлег-с1з
    @ПапаОлег-с1з Год назад

    Молодец .

  • @tomektomek2475
    @tomektomek2475 11 месяцев назад

    WHAT FABRIC stand ??!?!?!?! Corrosion eat this car in 3 years.

    • @xinxianshi
      @xinxianshi  11 месяцев назад

      Regarding corrosion, the longevity of any repair depends on various factors, including the quality of materials used, the skill of the technician, and how well the repaired area is protected against corrosion. If the repair is done using proper materials and techniques and the car is adequately protected, it should have a reasonable lifespan.

  • @rafiko317
    @rafiko317 Год назад +2

    No comment

    • @xinxianshi
      @xinxianshi  Год назад

      Thank you for stopping by and watching the video, @rafiko317! If you ever have any comments or questions in the future, feel free to share them. Your feedback is always welcome. 😊📺👍

  • @peterjory8830
    @peterjory8830 11 месяцев назад +1

    Why?
    What a waste time scary it!!!!!!

  • @ستاتيواتساب-ع8ج
    @ستاتيواتساب-ع8ج 11 месяцев назад

    Bravo