I live in Olympia, Washington. The United States. I wanted to say THANK YOU!!!! I got so excited by your excitement. You and I both have the same adrenaline need. And express our excitement with such joy. Thank you again for your post.
@@UAERCADDICTS The batteries they use are very small and not powerfull enough. With these motors the boat shoul be flying. They need to buy bigger batteris and place them properly so the boat is stable and can turn smoothly.
Those are all great fun boats but victory team is the big dog on the pond. what was so funny was the rescue real boat was smaller than the RC boat Victory:)
Very nice rc boat, Needs some adjustments at the back , I can see it chine walking when he is speeding up , A set of adjustable trim tabs would fix that chine walking unless those stingers on the boat are movable but I still highly recommend trim tabs which can also help with torque roll , Have fun & best of luck .👍
Each of the hulls of the catamaran should house motor, esc and batteries. With main weight being on the second step. Only rudder servo and radio equipment should be on the tunnel.
I believe the tailfishing problem can be solved spacing the rudder cables wider. There should be a lot of water pressure at the rudder blade moving the rudder side to side. Also the cables inside the boat must be running inside a a larger tube. This will prevent the cables from bending.
That big boat is seriously under propped. You can hear it cavitating in the water. Also the horizontal oscillation can probably be fixed by tightening those rudder cables.
That big-ass boat if it had those metal stabilizers in the back it would probably track better Batman you have one hell of a collection very nice my friend my grandson turned score I just got him a 35-mph out-of-the-box it's like 55 km I know that's a lot for him being so young but I wanted to get him something he can upgrade with upgrades and take care of it and enjoy it I just wish I was there to enjoy it with him he's 600 miles away I'm trying to move back and get the RUclips channel going with the grandson you have a good one my friend it was really cool to see your video I did subscribe💯💪🏽💪🏽💚👍🏽👍🏽💚🤙🏽🤙🏽💚👊🏼👊🏼
Die Lenkung bzw das ruder hat zu viel spiel da sind vermutlich die Steuerseile nicht ausreichend stramm gezogen (gespannt) . Ein sehr beeindruckendes Modell auch vom Fahrbild her ich frage mich ob man dahinter sogar Wasserski fahren könnte, das wäre mal eine Challenge .
that huge blue cat looks great but needs to be adjusted or something ..all that shaky waky movement and very slow ...i am sure it cost a fortune though...
When rc boats start getting this big, the builder might want to consider making a life size boat, leave all this rc stuff behind. Still, it's a fantastic build and I wouldn't mind owning one myself.
@@UAERCADDICTS lol, you are wrong! MHZ was a Mystic and this is not. The rear of the boats are different. I own a HPR 233 and MHZ 245. HPR was Swiss made and MHZ is sold by Germans but not made in Germany. To prove my point, go and visit mhzengines and you will see you are wrong. Also the boat has HPR hardware which does not fit MHZ (rudder).
Hey my friend how in the hell would you come about getting one of those big ass clothes it seems like you guys have the best of everything on that side of the pond I'm new to this is the first video I have seen that thing is a b you probably could ride it just about LOL I would say that's probably at least a few thousand dollars worth maybe more💯👍🏽👍🏽💚💪🏽💪🏽💚🤙🏽🤙🏽💚👊🏼👊🏼
This is a HPR 233, originally built by swissmodelpowerboatteam. No longer trading. MHZpowerboats did offer a large catamaran, Mystic C5000R, but is no longer listed and not the same boat. Radtekpowerboats offers this hull.
Its struggling...those motors are way too small for this boat..the ecs are probably getting hot.. props are way too small as well....not enough to push this monstrosity ..but defined looks cool
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Big blue seems a lil underpowered. cool tho
I live in Olympia, Washington. The United States. I wanted to say THANK YOU!!!! I got so excited by your excitement. You and I both have the same adrenaline need. And express our excitement with such joy. Thank you again for your post.
Some serious boats, mega fun. Thanks for showing 👍🏻
A huge boat.
So cool!!!👍👍👍
Nice boat, its definitely hugely awesome!
KEEP ON BASHING, OR SPEEDING! FROM BARRIE ONTARIO CANADA
NICE VIEWS, LOVELY PLACE..
Thanks alot mate
Hey guys FJB you got a beautiful place there I might have to come visit your pond someday
You have a very informative channel.
Thank you very much!
Drinking game; take a shot each time he says OMG🤣🍻
Damn thing is slow and unstable.
Zelos though is flying!💙
😂😂😂
We still testing it on 12s , its capable-of 24S
@@UAERCADDICTS I'd say you need to sort the stability out before contemplating 24s.
Lmao 🤣
@@UAERCADDICTS The batteries they use are very small and not powerfull enough. With these motors the boat shoul be flying. They need to buy bigger batteris and place them properly so the boat is stable and can turn smoothly.
Wow, seeing the rudder servo and cable connections at 1:39 explains a lot. Nice boat, but the engine room looks like the budget was gone already ;-)
I agree... That rudder/servo linkage is janky as hell.
Beautiful place for RC Boating. Really enjoy your videos.
Those are all great fun boats but victory team is the big dog on the pond. what was so funny was the rescue real boat was smaller than the RC boat Victory:)
Nice boat,awesome back drop
Thanks 👍
Holy shit!!!!!!!!what a Amazing Boat😍😍😍
Very nice rc boat, Needs some adjustments at the back , I can see it chine walking when he is speeding up , A set of adjustable trim tabs would fix that chine walking unless those stingers on the boat are movable but I still highly recommend trim tabs which can also help with torque roll , Have fun & best of luck .👍
that's a lovely looking massive RC boat brother, lucky guys you are!
Very big boat !! It runs very good 👍
I will star building the boat like this....from 🇲🇾Malaysia...next week my project start
thats a huge rc catamaran bro..i love rc boats this big one is amazing its electric oh myyy..
Thats a beautiful boat!!
Love it awesome boat , beautiful surroundings thanks for sharing 👍🏽
Each of the hulls of the catamaran should house motor, esc and batteries. With main weight being on the second step. Only rudder servo and radio equipment should be on the tunnel.
Fully agree. It would stop that slight weaving we were seeing .
Thanks man
An adjustable skeg on "inside" hull/sponson?
awesome rc boats,cool video brother
Thanks bro
The Victory boat was bad ass but that smaller orange one was a beast!
i agree :)
I like that rc boat you sir I'm here in the phillipines
Most welcome bro
Nice boat, I would focus on balancing the weight. Its super unstable.
It looks like he has a gyro on it. Needs to turn the gain down...
Yeah also seen them dual motor set ups do that when not matched up .
😳 Dude I love this boat! I need one! I have a proboat zelos 48g modded gasser but this is much bigger!!! 🤘😎🤘
Beautiful bro
Nice ossom chincriat and video
Beautiful place to be.
I believe the tailfishing problem can be solved spacing the rudder cables wider. There should be a lot of water pressure at the rudder blade moving the rudder side to side. Also the cables inside the boat must be running inside a a larger tube. This will prevent the cables from bending.
Riding on a prop and a prayer 😊👍
That big boat is seriously under propped. You can hear it cavitating in the water. Also the horizontal oscillation can probably be fixed by tightening those rudder cables.
Would love this with Gas Motor 😏. Need it for Fujairah/Dibba waters
Mind Blowing
thanks
That big-ass boat if it had those metal stabilizers in the back it would probably track better Batman you have one hell of a collection very nice my friend my grandson turned score I just got him a 35-mph out-of-the-box it's like 55 km I know that's a lot for him being so young but I wanted to get him something he can upgrade with upgrades and take care of it and enjoy it I just wish I was there to enjoy it with him he's 600 miles away I'm trying to move back and get the RUclips channel going with the grandson you have a good one my friend it was really cool to see your video I did subscribe💯💪🏽💪🏽💚👍🏽👍🏽💚🤙🏽🤙🏽💚👊🏼👊🏼
thanks Roy :)
@@UAERCADDICTS big welcome thank you my friend
Excellent 👍👍👍
Very good!where did you buy it???
Awesome
Did he put some sort of gyro on the rudder? Fishtailing very bad.
Die Lenkung bzw das ruder hat zu viel spiel da sind vermutlich die Steuerseile nicht ausreichend stramm gezogen (gespannt) .
Ein sehr beeindruckendes Modell auch vom Fahrbild her ich frage mich ob man dahinter sogar Wasserski fahren könnte, das wäre mal eine Challenge .
Hmm 94" Hull is not available to buy on the MHZ website ?
I like that rc speed boat you sir how much that I'm here in the phillipines
Cool bro
The big boat has some serious prop walk. Needs to have some rigging work done to make it stable. The way it’s handling it’s impossible to run wot.
Fantastic!
Glad you like it!
The ship is shaking from side to side, so I can't sail properly.
Servo Horn of that hull, Linkage needs to be changed.
this dude really using Chopper props? loads of money but no clue what prop to use als owhy 360p?
Its 180p servo but trying to keep it stable
@@UAERCADDICTS huh?
In english it need bigger servo 🙃
@@UAERCADDICTS iam talking about the propellers not servo
That proboat needs some serious setup, shouldn’t porpoise like that
needs stabilizers and bigger rudder with stronger servo
Why does it make this wobbling left/right sometimes? Motors not sync?
that huge blue cat looks great but needs to be adjusted or something ..all that shaky waky movement and very slow ...i am sure it cost a fortune though...
Qual a largura desse bolt catamaran amigo 2.35x ???
It’s fast even on 12s.
Why's it all wobbly?
The blue one should get jet turbine.
dude could u reply plz the baja is 5bss
no thank you bruh not interested
looks like motors are out of sink or problem with rudder
Synchronization is the issue
Looks to me there is to much slack in the rudder cables allowing it to sway bavk and forth in the prop wash.
When rc boats start getting this big, the builder might want to consider making a life size boat, leave all this rc stuff behind. Still, it's a fantastic build and I wouldn't mind owning one myself.
Hole in the water
niceeee zelos 48". is it ridding in 2X 6S bateries total 12S ?
2x 3s =6s
3:25 Put some real batteries in it and take the slack out of the steering cable, and that big dog will rip!
thanks ken yes we are still testing it on 12 s it can run up to 24 but first let us make the 2 motors and esc lunch exactly at the same time :)
Nice video , what is the set up of the zelos? I still got that 1000 kv engine en it fast. But this one is faster i think
1650 kv leopard 4s run 70c zoomer battery
@@UAERCADDICTS thank you , that helps me allot
How speed your boat
What the fuck is awesome 😎😮😮 from ph 🇵🇭❤️
Haha victory team, my dad worked on the real race boat
Steering setup is not good!! Could possibly be a propshaft alignment issue also! My guess is both...
Really nice boat and video. Do you know the motor and ESC Brand?
thanks man yes its a HIFE swordfish esc
and the motor POSEIDON BRUSHLESS MOTOR P2240-PV22 880KV
How fast is it
Chine walking and what appears to be uneven thrust!
This looks like HPR 233, not MHZ 245.
Need to set this up correctly.
it is German boat and its called MHZ 235
@@UAERCADDICTS lol, you are wrong!
MHZ was a Mystic and this is not. The rear of the boats are different.
I own a HPR 233 and MHZ 245. HPR was Swiss made and MHZ is sold by Germans but not made in Germany.
To prove my point, go and visit mhzengines and you will see you are wrong. Also the boat has HPR hardware which does not fit MHZ (rudder).
@@e46s54 it is MHZ 2.35 Meter
@@e46s54 it was the Mystic C5000 | Catamaran | 2350mm (94") | 2strock dual motor version we converted to brushless
All show no go.
Dope
Appreciate it ❤️
Subscribed!
Thanks mate and welcome to the channel
@@UAERCADDICTS thanks! I have a few boats myself but nothing that big!
Kindly share the link from where that we can buy it
This is a vintage boat build in germany 1989 so i tried to trace the source but the vid all what i got
Owner flew Europe because of cold
Beautiful boat....I think my 8s blackjack is faster
I think just about any newer boat is faster than that. That new BJ looks sweet!
He is not going full throttle and it’s a heavy boat
nice one but need engine balance
How do I buy this
5:50....you don't RIDE the boat. You say Pilot the boat or steering the boat or navigating the boat.
Hey my friend how in the hell would you come about getting one of those big ass clothes it seems like you guys have the best of everything on that side of the pond I'm new to this is the first video I have seen that thing is a b you probably could ride it just about LOL I would say that's probably at least a few thousand dollars worth maybe more💯👍🏽👍🏽💚💪🏽💪🏽💚🤙🏽🤙🏽💚👊🏼👊🏼
The wire to the rudder is way too small.
this is true but we still need to match the timing and throttle response to the ESC's and motors
Was ist das viel zu langsam mit den Komponenten.
If you can tell in english bro
lerne immernoch
The big boat needs sort the rudder servo out as there's some serious wobble , very unimpressive
Will sort it out soon
thnx bro
Wow☺
可惜了，船都没调好，左右晃。
Are both props turning the same directions ?
yep and we fixed it thanks for noticing cannot wait to hit the waves again
looks like the motors are not equal power on each side
motors are equal but esc is delay throttle response on one side that's why we still testing
Need bigger propellers maybe
More V 😁
Looks like he can't keep it straight
Who made it? Can I buy one?
MHZ rc boats Germany google them online
This is a HPR 233, originally built by swissmodelpowerboatteam. No longer trading.
MHZpowerboats did offer a large catamaran, Mystic C5000R, but is no longer listed and not the same boat.
Radtekpowerboats offers this hull.
@@e46s54 👌
@@UAERCADDICTS Glad to see you finally agree.
@@e46s54 most welcome
$15,000 RC boat!
LOL
What the heck is wrong with it? It's swaying back and forth.
Check the slack in his steering linkage
Its struggling...those motors are way too small for this boat..the ecs are probably getting hot.. props are way too small as well....not enough to push this monstrosity ..but defined looks cool
This is a vintage boat
@@UAERCADDICTS I understand.. ship it to me to the USA...I let me build it the way it should be built...donate it to me please...
THAt big boat should be 3 times that fast. Something is wrong. Nice however!
Yes 8s instead of 12😢
This is so big 😁 that's what she said
🤣👌
I was expecting a much better performance
Stay tuned 😎
bro why are u not replying
OMG
The bigger the less the power
Where can i get that? Fuckin awesome bro!
Really though where can I buy one?
You can get it from www.mhz-powerboats.com/shop/en/
@@UAERCADDICTS thank you so much man! That is awesome of you!👊🏼
@@travisrieder8710 most welcome
حسنا لما لا تتكلم بالعربية و تضيف ترجمة للفيديو؟ أفضل لك و لأنتشار المحتوى لأن كما هو واضح الهواة معظمهم مواطنين و عرب
ساتكلم ولكن اغلب متابعيني من الناطقين باللغه الانجليزيه
@@UAERCADDICTS
كما تشاء، قناة عمرها ٩ سنوات لم تجمع أكثر من ٢.٨ مليون مشاهدة رغم أن محتواها رائع (و خصوصا ال offshore RC boats)...
تحياتي
عزيزي لم اقم بالتحميل في القنا سوا منذ سنتين تقريبا
Slow as hell....open that that thing up and turn off the Gyro