How to Make Wood Jack-O-Lanterns Without a CNC! - Cheap DIY Fall Craft Fair Favorites for Halloween!
HTML-код
- Опубликовано: 18 сен 2023
- How I make these low cost, best-selling fall craft fair favorites. These easy to make Halloween Lanterns have been quite popular for the past few years, but I haven't had time to make them myself until now. I needed to add some small products to my lineup to sell at local fall craft fairs and other seller venues and had some extra time on my hands this year, so here is my take on them. Check it out if you want to see how I made them!
Amazon Affiliate links to the tools used in this build:
KOABY LED Tea Lights: amzn.to/3RsP1Rc
Olson Saw SP46500 Spiral Scroll Saw Blade: amzn.to/3ZqyXS0
Dewalt 18 Gauge Brad Nailer: amzn.to/44fD9FU
18 Gauge Brad Nails: amzn.to/428GiWi
FastCap Glue Bottle: amzn.to/3Ln8mhM
Bernzomatic Torch Kit: amzn.to/3uM3xqB
*As an Amazon Associate I earn from qualifying purchases.
How To Burn Wood For the Perfect Rustic Finish - DIY Torching Tips, Tricks, and Techniques: • How To Burn Wood For t...
#woodworking #woodworkingprojects #woodworkingideas #diy #diyprojects Хобби
Pro tip: cover the board in painters tape. Hit it with spray adhesive, attach pattern, saw it, easy removal😊
Thanks for the tip!
I made some of these for last year's Halloween, but I never thought about making a ghost.that looks pretty cool
I made a few others as well, like an owl and frankenstein. The frankenstein was the three most popular of them all. I'll probably do a follow up video on those soon.
Very cool! Thanks for sharing!
You're welcome, Mark, and thanks for watching!
These look awesome!
Thank you!
Love them!! 🎃
Thanks, Rachel!
Love the radial arm saw!!!
I built it into my miter station. It's meant to be my dado station, but I haven't gotten around to finishing it up. Still need to level it, build the fence and dust shroud, and plumb the dust collection. Someday. It's on my list. I'll make a video and plans when I do.
Love the coloring, never seen them like that before!
Thanks. Yeah, the extra burn around the cutouts makes a cool effect.
I really like this. It's so simple. Thank You.
You're very welcome. Thanks for watching.
Love the detailed, but no nonsense delivery. looks like an easy project with a cool result!
Thanks. I've gotten a lot better at that. The cross build is my top performing video, but it's 45 minutes long. Some people appreciate the extra information, but some prefer them more like this. Getting better at editing has a lot to do with it, too, but I've been working on making them more efficient videos while still trying to give as much info as I think is important. It's a balance.
Great vid man.
Great job.
Thanks David!
Good job and project thx for sharing they look amazing
Thanks Larry!
when you hit the lights at the end! awesome way to end it! Going to start making these right away
Thanks! I think most people don't stick around long enough to get to the end of the video to see it. I've added bloopers at the end of a couple of other videos and no one has ever mentioned it.
looks great
Thanks!
I’m gearing up to make some of these too! Great video guy! Good luck on the sales!!!!
Thanks. I'm making a couple more designs right now, and then I'll be selling them all this weekend. I'll probably put out an update video next week to show the new designs and let you guys know how the sales went.
Very cool great idea
Thanks Jim!
Well done!!
Thank you!
Great project and great video. This one will definitely get noticed.
Thanks buddy!
Really awesome
Thanks!
I really like how the grain came out from the burning 👍🎃
Thanks, me too!
Awesome idea and video
Thanks!
New subscriber, this was a cute project, thank you for sharing!
Thanks, I'm glad you liked it. Welcome to the channel!
Love the burning around the faces!
Me too! It makes a big difference.
Good video. Suggestion for the lid to save some time…instead of trying to “trim to fit” the short sides, do the same thing you do with the long sides. Leave some extra length on the short sides, attach them to the lid BEFORE the long sides and cut them flush to the lid with the miter saw, then continue doing the same thing with the long sides that you’re already doing.
Good idea!
Nice work
Thanks!
Awesome video. Love how you got so in depth in explaining what you were doing. You would be a great teacher. I wasn't subscribed but I am now.
Wow, thank you. I really appreciate it.
I'm a beginner woodworker so when creators get in depth like you just did it helps people like me a ton. Not many creators for that anymore. They are too worried about just getting veiws haha. Love the video.
First video I've seen from you and I enjoyed it........I think I'm going to end up making these for the neighbors I only have two lol. Great concept I like your ideas and wanted to add one. Tissue box covers made from hardwood for fall gifts. I made some with mitered and splined joints and they came out really nice using contrasting woods.
Ooohhh, I like that. Thanks for the idea. I'll see what I can come up with.
Just found your channel. Good job. Good build. I'm new to making little things like this. Great ideas 💡 😊
Thanks, I'm glad you like it!
This is awesome! I might have to try to make a few!
It's actually kind of fun to make simpler stuff like this every once in a while. Even if you're not selling them, friends and family will all love them.
Great tutorial Sir! ... Thank You!! =)
My pleasure, Clinton. Thanks for the support!
great job
Thank you!
Thank you for the video, I'm new to wood working ( 2 cutting boards in ) and this looks like a fun project to make. You got a sub from me!!
Thank you for watching, and welcome to the family!
Same and same. Love your work @maverickdesignswoodworking
@@ZER0MPH Thanks and welcome!
Spiral blade! Thank you!
You're welcome!
When scrolling there are 2 main options. Wrap the template and board in clear packaging tape. It helps lube the blade. Alternatively spray adhesive on just 1 surface. If going that route and ya have trouble removing the template remnants, mineral spirits will dissolve it after a quick little misting. Twomajor upgrades for the dewalt scroll saw is a good light and I love using a variable speed foot pedal. Many ppl use a pedal that are deadman switches or just simple on and off. Great job!
Thanks, and thanks for the tips. Mine has light, I just wasn't using it, but a foot pedal would definitely be nice.
I tried this myself and it was awesome! I love that orange and green. I found them at lowes like you said. I was wondering what white you used for the ghost and if you think it would be a good one for snowmen?
Glad to hear that! I believe the white is called Pure White, and I'm sure it would be good for a snowman. I'm going to do some Christmas themed ones myself, and that's the white I'll be using as well, unless I decide to paint instead, which is a possibility. I don't think the burning will look good on the Christmas ones, so I'll probably test the stain and white paint to see which looks better.
Excellent video Thank You ; ) I have the same chop saw, do you have a video showing how you made the zero clearance bottom plate and the enclosure? I would be willing to pay for plans.
Not yet. I do plan to make plans for the whole miter station, as well as just about everything else in my shop (CNC table and enclosure, run out/assembly table, tool and hardware bench, sanding storage station, clamp storage, dust collection cart, glue up jig, other jigs, etc.) but haven't had time to do it yet. It's all coming though, as soon a I can get it all done and get the website up and running. I have a short on me installing the zero clearance insert on the miter saw already, but I didn't make it--i bought it from Etsy.
When I made something like this I wasn't able to find any orange tinted stain, so I had to use regular matte orange paint and put it on very lightly with one of those sponge brushes. It doesn't look as good as yours but it doesn't look terrible either.
Also I made mine as a set of three. One each at 10", 8", and 6".
Fiesta Orange minwax solid stain from Lowes.
Great video. What is the minwax product you are using and where did you buy it from? Thank you
Thank you! It's minwax solid stain clear Tint Base from Lowes. The two colors I'm using here are hunter green and Fiesta Orange.
Love your work what is the color on the minwax trying to find it
Thanks. It's Fiesta Orange. You take a can of solid clear Tint Base to the paint counter and ask them for Fiesta Orange.
Great video...what blade are you using on your scroll saw?
Thanks. It's an Olson #4 spiral blade. It's linked in the description.
Thanks so much.@@maverickdesignswoodworking
If you put down either contact paper or painters tape on the wood, and then use spray adhesive on your pattern paper. The pattern stays in place and easier to cut. I’ll cover mine with packing tape which lubricates the blade and you’re able to cut longer without heating up your blade.
Thanks for the tips, I'll try that.
Thanks for the tips, I'll try that.
Great project~! Will have to make some of these for gifts. If you have the link for the pumpkin faces, would be great if you could provide a link. Thanks much~!
New subscriber~!
Thanks, Andrew, glad you liked it. This is the one I got, but there are a lot of others as well.
www.etsy.com/listing/1068596566/pumpkin-face-x100-bundle
wonder if you could tape/glue a little level on the nail gun so it would be easier to line up the brads
That's not a bad idea. I might try it.
Curious about the Minwax stain you used. Do you use the solid or semi-transparent formula?
Definitely solid. The new formula semi transparent is terrible stuff in my opinion. The solid applies just as easily as the old formula (just apply, no need to remove) and is just as transparent. I have a couple of videos on this, the second of which does a direct comparison between the new solid and semi transparents, and the old formula. I only use the solid now, but if you still have some semi transparent, the first of those 2 videos shows the technique I use to apply it to get the best results.
Would a 23 gauge pin nailer work better? I don’t have one personally, but the 18 gauge blowout has messed up a couple of my projects
It might, depending on why you're getting so much blowout. If it's mostly due to an inability to shoot the nails level, I suspect you'd have the same problem. You can definitely try. I'd test on some scrap pieces first, as I would be worried about the pins going all the way through the top board with the cedar being so soft. Or use some scrap to practice with the 18 gauge to get better at placement. Worst case scenario you could just glue them up. The nails mostly serve to just hold everything together while the glue dries.
What brand orange stain did you use? TIA
Fiesta Orange minwax solid stain from Lowes
I have been making some of these recently as well. I bought a 2 1/2" Forstner bit to put a recess in the inside bottom for the candle to sit in. That way it won't slide around. What color orange did you use with the Minwax? Was that one of their standard colors or did you use a color code to have them mix it like your flag colors?
It's not premixed, but it is one of the current available colors for minwax stains, Fiesta Orange. You just get a can of Minwax Wood Finish Solid Color Stain Clear Tint Base (NOT semi transparent), take it to the paint counter, and ask them to mix it with Fiesta Orange. I like that candle holder idea, it's a nice touch!
@@maverickdesignswoodworking it's actually a 1 1/2" bit. Not a 2 1/2".
first questions is about the planer dust collection. what set up is that?
It's the dewalt 735x with a 4 inch 90-degree elbow and a dust right bag from rockler. An even better way is to add a few feet of 4 inch hose so that you can put the bag either hanging down to the side, or underneath the planer on the shelf below it if you have the stand. I'm working on piping an actual dust collector to it, though, which is why i haven't done that.
Thank you, i dont have any plans for actual dust collection so i have been looking for something like this. @@maverickdesignswoodworking
This only works because the 735 has its own blower. Any other planer that doesn't will need to be hooked up to some type of vacuum or dust collection.
What is the stain you used
Minwax solid stain in Fiesta Orange.
How much did you sell them for
Started at 20 each, 3 for 50, but that was tough. Sold better at 15 each, 3 for 40. But that was only in person sales (craft fairs, etc.). You'd have to be in the higher range if you're selling online due to the shipping (if you're offering free shipping). I think they get 20-25 each on Etsy, but I haven't sold there.
What do these sell for?
I'm not sure yet. I'll be selling them actively at two different shows this weekend. I'll probably start at 20 each, or 50 for 3, and go from there. If nobody's buying, I'll have to consider going down, if their selling like crazy, I'll consider going up. It really will depend on the market.
Good plan. Can you keep us updated? How many would you say you make an hour?
what are the dimensions?
Hi Ronnie. I mentioned them in the video, but basically the box is 10 inches tall. The front and back panels are 5.25 wide-- just enough to square up both the edges from the 5.5 stock. The sides are 3.5 wide. The base is 1 inch larger than the assembled box both in width and length so that it will overhang by a half inch all the way around. What that is exactly will depend on the dimensions of the assembled box, which will vary based on how thick your boards are after planing, sanding, or whatever you do to them. Same with the top, which is just a hair bigger (about 1/16) so that it fits easily j the box and isn't too tight. The edges around the top are 7/8 wide, and the stem is 1.5 inch. Hope that helps.
@@maverickdesignswoodworking thanks, I re-watched the video and saw where I missed it. Thanks for responding, love the vids, very informative, much appreciated for a newbie like me.
Happy to help! I learned a lot from RUclips myself in the beginning. It's an awesome tool for that.
if you order a stack of rare earth magnets you can add those to the base place with a spacer board tacked to it and a candle recess cut . . . then you're not juggle'n a light into the bottom . . . you can also option to 'frame' the inside of the front of the box with small off cuts use rare earth magnets and then you can use different face plates on the candle box . . . either swapping designs for that particular season or go to a neutral box and create multiple seasons / holidays with one box . . . i'll put my video up once i get my stuff in :) nothing wrong with help'n each other out to make production easier to move more product :)
oh and subscribed / liked :) fellow woodies should stick together
Thanks!
I like the base idea, and minus the magnets had considered making a holder for the candle, but I also wanted to make it as fast and easy as possible to make these. Because if the low selling price, I wanted to increase the profit margin by being able to make more in a shorter time. Plus, it's really not a huge nuisance to lift the lid and drop the light in, so from a business perspective it made more sense to me this way. I've also considered the replaceable face idea, and may still do that. That will increase the sales price though, and I wanted to make a quick batch of these for a show coming up to first see how much interest there is and if they'll even sell well in my market. If they're a huge hit, it's definitely something I'll consider, especially since the holiday season is rolling in and there will be other patterns to make. The main thing keeping me from that, though, is if need to leave the boxes unstained, and I feel like the colors and look of them are what makes mine stand out from others. It's definitely all stuff I'll be considering going forward, once I determine how well they sell.