TRAXXAS WHEELIE BAR (

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024
  • In this video I install the Traxxas Upgraded Wheelie Bar (Part #3678) on my Traxxas Stampede 2wd….I also install the Traxxas Battery Expansion Kit (Part #3725X) so I can run a taller 3s Lipo Battery Pack
    Traxxas Stampede 2wd Hardened Steel Driveshafts -
    www.ebay.com/i...
    1/10 2wd Traxxas Hub Bearing Kit - 10 pcs for Slash 2wd, Rustler 2wd, Stampede 2wd -
    www.ebay.com/i...
    Amazon Affiliate Links -
    Traxxas Wheelie Bar (#3678) for Traxxas Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
    amzn.to/3U9hER2
    Traxxas Battery Expansion Kit (#3725X) for Stampede 2wd, Rustler 2wd and Bandit 2wd -
    amzn.to/3GTwE2l
    RPM Rear Hub Carriers for Traxxas Slash 2wd, Stampede 2wd, Rustler 2wd, Bandit 2wd (Black) -
    amzn.to/3Ev8pVq
    Traxxas Blue Anodized Front Steering Blocks (3636A) for Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
    amzn.to/3Ex8DLL
    Onyx 1/10 Scale 4 Pole Brushless Motor (4000kv) with 70 amp Esc with Ec3 Connector -
    amzn.to/3gbponc
    Hot Racing Medium Duty Servo Saver (Blue) -
    amzn.to/3T4K2ny
    Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
    amzn.to/3AfJzYG
    Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
    amzn.to/3dkYgkd
    Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) -
    amzn.to/3bT6nnN
    Amain Hobbies Links -
    Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (PINK) (Battery and Trickle Charger Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (GREEN) (Battery and Charger Not Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (ORANGE) (Battery and Trickle Charger Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) -
    www.amainhobbi...
    Traxxas Stampede 2wd Xl5 (ORANGE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (PURPLE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
    www.amainhobbi...
    Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
    www.amainhobbi...

Комментарии • 38

  • @gavinc.9785
    @gavinc.9785 Год назад +2

    Funny story, not sure if you remember, but my slipper clutch was tightened all the way and 10 minutes into driving it sheared off the roll pin on the input shaft ! Lol. Great video! Love the stampede!

    • @RCKnockout
      @RCKnockout  Год назад

      Glad you liked it! Wow…that’s highly unfortunate…shoulda probably loosened it….hindsight’s always 20/20 though lol

  • @twowheelingnut7898
    @twowheelingnut7898 Год назад +3

    The old hold down was on my 1994 stampede. The receiver would sit in front for it. Doesn’t work for lipos.

  • @cjchannel12RC
    @cjchannel12RC Год назад +2

    Cool video, That wheelie bar the wheelie bar part is also used on the Stampede 4x4 just a different bumper mount and can also be used on the Slash 2wd. I agree with you on Philips head screws my dad has a Tamiya TT-02 and it has all Philips head screws on it and it's tricky to get them out without the risk of stripping them. I like hex heads way better but they can still strip if you're not careful i have stripped a few but i was using lower quality drivers.

    • @bombpoprc2023
      @bombpoprc2023 Год назад +1

      Agreed with the Phillips. My rustler 2wd xl5 came with all Philips screws. I had converted it all over to hex hardware. stripped out both phillips and hex before but I strip phillips the most.

    • @RCKnockout
      @RCKnockout  Год назад +1

      Oh ok I gotcha…..yeah I can’t stand the Philips head screws…they’re so difficult to get out

  • @islandrc-duke1972
    @islandrc-duke1972 Год назад +2

    cool upgrade and install

  • @JayJay.951
    @JayJay.951 Год назад +2

    Great video 👍That part might just be for the brushless Vxl stampede

    • @RCKnockout
      @RCKnockout  Год назад

      Thanks! That’s kinda odd that it would be a part needed for the vxl model though?

  • @HNunyabusiness
    @HNunyabusiness Год назад +3

    Wheelie bar is cool. How about adding a few grams of weight to the front? Amazon sells small metal weights in very small increments such as a single gram. Placed in the bumper or front of the chassis will keep it planted. It did in a very old nitro slash I used to have.

    • @RCKnockout
      @RCKnockout  Год назад

      We will see….first I wanna test the Stampede with just the wheelie bar installed

  • @JJsWorld79
    @JJsWorld79 Год назад +1

    That foam piece is for the black stampede chassis and it goes in the little boxed in portion of the chassis on the very back under the platform and ull probably need that hold down cause ur chassis is shorter than the black chassis

    • @RCKnockout
      @RCKnockout  Год назад

      Didn’t realize the Stampede was available with different chassis lengths?

    • @JJsWorld79
      @JJsWorld79 Год назад

      @@RCKnockout ya I will send you a picture of via email cause I can't get to my camera from here to take a picture of mine

    • @JJsWorld79
      @JJsWorld79 Год назад

      I tried to send an email through this link but it wouldn't let me but if you have an email address I can send it to you that way

  • @byx3493
    @byx3493 Год назад +4

    You will want to zip tie that wheelie bar in the desired position they like to pop out of place all the time

  • @tibss
    @tibss Год назад +2

    any problems with that servo? also try moving your receiver to the front or add about 1 pound to the front and it will help alot i think.

    • @RCKnockout
      @RCKnockout  Год назад

      No this servo has been holding up well since I’ve installed it

  • @Lorenz_c
    @Lorenz_c Год назад +2

    Nice

  • @JJsWorld79
    @JJsWorld79 Год назад

    It is all u need to raise the platform but it raises it too much with the spacers that come with it but if you go to ace hardware and get some aluminum spacers that are not as tall and a 3s pack will still fit under the platform cause it's too high for my taste with those spacers in the kit it looks stupid with the spacers in the kit and I had to drill different holes in the battery hold down posts to make the battery hold down fit tight against the battery and where it wouldn't slide out of the truck all together but I bought the kit too and just modified it with parts from ace hardware

  • @EJ-74
    @EJ-74 Год назад +1

    Cool vid 👍🏻✌🏻

  • @bawx
    @bawx Год назад +1

    Next time dab a little super glue on the spacers on the backside of the plate. Less fiddling around. 😉

    • @RCKnockout
      @RCKnockout  Год назад

      Thanks for the tip! 👍

    • @bawx
      @bawx Год назад +1

      @@RCKnockout I recently did straps on my Xmaxx where you have zero room for fingers in the trays. Works like a charm! 🙂 Enjoy!

    • @RCKnockout
      @RCKnockout  Год назад

      @@bawx nice man!

  • @davidcoffman2674
    @davidcoffman2674 Год назад +1

    Just buy you a bag of different mm hex screws and replace the Phillips head screws?

    • @RCKnockout
      @RCKnockout  Год назад +1

      Yeah…they’ve got kits you can buy too….it would have been nice to have hex screws from factory though

    • @davidcoffman2674
      @davidcoffman2674 Год назад +1

      I just bought the stampede truck and I like it,I've been checking out upgrades on Ebay and I'm going to completely up grade it,I call it thre rock spitter, lol..

    • @RCKnockout
      @RCKnockout  Год назад

      @@davidcoffman2674 nice! It’s fun to upgrade rc cars!

  • @Miko_of_the_North
    @Miko_of_the_North Год назад +1

    Do you think you could do a 4s upgrade?

    • @RCKnockout
      @RCKnockout  Год назад

      Not to mine….it wouldn’t make much sense….wouldn’t be able to get the 4s power down with a 2wd rc like the Stampede

  • @brandoneast3885
    @brandoneast3885 Год назад

    I run mine without a wheely bar, it's called throttle control. A