Replace Water Pump in Toyota Corolla 2008 - Leaking Coolant Overheating
HTML-код
- Опубликовано: 1 фев 2025
- Is your car Leaking coolant , overheating , or maybe blowing steam? You may have a failing water pump. In this video Josh walks you through the process, step by step, of removing and replacing the water pump in a 2008 Toyota Corolla. The steps he follows will generally apply to most modern vehicle.
STEPS:
-Lift car
-Drain fluid
-Remove belt
-Remove alternator
-Remove and replace water pump
-Same in reverse
TOOLS NEEDED:
-Jack & stands
-Pliers
-Flat screwdriver
-Drain pan
-Socket set (with extender)
-Breaker bar or pipe (fits over socket wrench)
-Funnel
-Flashlight
Please if you like this video do us a solid and subscribe. It enables us to continue making useful videos! Thank you and thanks for watching!
Please if you like this video do us a solid and subscribe. It enables us to continue making useful videos for you! Thank you and thanks for watching!
This guy did excellent explaining the video in detail, right to the point. Stealership wanted bank to do this little stuff
You saved me a couple hundred $s, Dude! Very insightful and I appreciated the torque settings and fastener sizes. Thanks so much for this excellent video.
You are one of the best describer of this process with a basic tools,thanks
Great video. Only thing I would do different is change the coolant. It's cheap plus it will lubricate the waterpump. You could reach drain knob from top. Especially with long arms. Use hydrometer and test old coolant or just replace with Zerex Asian coolant. Well done video though overall.
Excellent video. Socket sizes and torque settings included. Thank you!
Are you an automotive technician? You are excellent at demonstrating "how to".
Thank you for the video. My sister needs hers changed (03 Corolla 1.8L) with only 37k!
37k fo an 2003 corolla. Are you sure that car wasnt rolled back.
Really well done video. Helped me out a lot. Thanks!!
Thanks for the video !!! You do a nice job. !!!
Excellent Video! Thank you very much
Excellent video
Very detailed way to explain it, Thanks!!!
Really Appreciate the Video.
Usefull video. Thanks!
I would like to add, after refilling the coolant you need to run the engine with a bleed funnel to get the air out of the coolant system. Then after bleeding top up the over flow bottle.
Mu 2006 corolla is leaking water kinda in the midle of the engine underneath intake manifold. Should it be a bad water pump? Idk what to think
Great stuff, thanks!
Very helpful video thank you
Should I replace my radiator if there is no leaks? My 2008 Corolla has 238 thousands miles with all original parts except serpentine belt and parks plugs.
Leave it alone u less there's a leak
Great video
I’m running into a problem I cant get the bottom bolts loose because my tools I only have a small ratchet 2 other ratchets but extension too long which won’t work a 10 mm wrench won’t work what length are those sockets ?
What about the torque specifications for the alternator?
Not sure. I do arm torque ;) snug with a 1/2” ratchet.
Can a bad water pump cause the AC to not work properly?
No lol it's not connect3d. Could be a bad fuse or connector or ac compressor or condenser Probably a leak from condenser but you need to get it inspected with dye freon to find where there's a leak.
Do you have any videos on Nissan Pathfinder how to flush power steering fluid brakes bleeding
Larry Cortes afraid I don't have anything up on that right now! Coming soon!
Dont worry bout warping or cracking the old water pump, its no good anyways. No need to be careful with it. And, the step of the other pulley being in the way of the last bolt was left out of the video.
Why save on new toyota coolant. A jug cost about $20. Thats the main reason why the pump goes bad.😂 but ngood job on tutorial.
What size were the bolts for the for the water pump
Side? 10 mm wrench is what you need
Budget Mechanic Hawaii than you
I have a 2005 Corolla and the bottom of the car make a screach noise by the catalyst converter. Do you know the problem?
Not sure without being there to hear it sorry. Catalytic converter's will make a screeching noise under acceleration when they are clogged tho!
Fantastic video! What kind of torque wrench is that? Looking for a recommendation because mine did not fit
It was an amazon one I believe. The 3/8” ones with low torque readings are the most useful for most people
muito bom
Can you please tell me the name of that gasket glue you used? Thanks!
just a generic water pump or designated water-sealing rtv from a parts store. usually its blue. I know a lot of guys even use the black stuff designed for oil and they say it works fine
Dealership just quoted me $1300 for the water pump and the serpentine belt.
That’s nuts
Crazy
I was taught that we're not supposed to spin the pulley on a new water pump.
I think mine is leaking like gray
I would like to add, after refilling the coolant you need to run the engine with a bleed funnel to get the air out of the coolant system. Then after bleeding top up the over flow bottle.
I would like to add, after refilling the coolant you need to run the engine with a bleed funnel to get the air out of the coolant system. Then after bleeding top up the over flow bottle.