Homemade Welding Fixture Table + Storage Hack - Built for my Home Garage Shop

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии •

  • @RathaSochenda
    @RathaSochenda  2 года назад +31

    Want to build your own? Link to the DIY Welding Fixture Table Build Plans:
    www.etsy.com/listing/962221433/garage-shop-welding-fixture-table

    • @doingcarthings
      @doingcarthings 2 года назад +6

      No I want to move next door to you so you can be a good neighbor and build me one :)

    • @RathaSochenda
      @RathaSochenda  Год назад

      @@doingcarthings 😂

    • @gdriver550
      @gdriver550 Год назад +2

      Hi Ratha, I purchased the plans for this table and am excited to get it built. By any chance do you know the model number for the casters you used? There are a lot of options from that company

    • @RathaSochenda
      @RathaSochenda  Год назад

      @@gdriver550 Thank you for the support! Check the link in the video description and should be good to go!.

    • @KikeLagos-z9e
      @KikeLagos-z9e 9 месяцев назад

      Hola que medida tiene de largo alto y ancho saludos bendiciones excelente trabajo felicidades

  • @bobanristic9047
    @bobanristic9047 3 года назад +153

    Best HomeMade Welding Table on RUclips!

  • @randal3122
    @randal3122 Год назад +15

    the way you used leveling nuts like that to make the table nice and flat was pretty damn smart. great job

  • @greasyHands66
    @greasyHands66 Год назад +14

    The mechanism for assuring flatness is amazing. Simple and right to the point.

    • @RathaSochenda
      @RathaSochenda  Год назад +3

      Still works great until this day. Table is still flat haven’t even had to readjust since the making of this video

  • @biglouie69
    @biglouie69 Год назад +6

    Finally took the plunge and ordered my 1/2" steel top material. Thanks for an excellent and inspiring video!

  • @tdg911
    @tdg911 3 года назад +168

    This video was suggested to watch and I'm so glad I did. I think this is one of THE best laid out and functional welding table I think I've seen! Trust me, I've done my research on welding tables in the past. My first one came out horrible! Your attention to fine detail, planning and craftsmanship is incredible! Let's not forget the job well done on your videography. Awesome job brother and thank you for posting the plans and video for us.

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      I’m glad you watched it and enjoyed it. 🤙🏾

    • @tdg911
      @tdg911 3 года назад

      @@RathaSochenda bought your plans too :)

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      @@tdg911 🤩 thanks for the support! I hope they serve you well. Let me know if you have any questions during the build. I’m here to help.

    • @tdg911
      @tdg911 3 года назад

      @@RathaSochenda Thank you. people never cease to amaze me. thumbs up

    • @selariunicusor2013
      @selariunicusor2013 3 года назад +2

      Same here to :) Glad to find your video
      Thumbs up

  • @bpallen1228
    @bpallen1228 3 года назад +2

    I started my table build last summer and stopped and moved onto a powder coating oven build. I now know why...I needed to find this video before finishing my table BEST VIDEO EVER!

  • @AutoExpertJC
    @AutoExpertJC 3 года назад +92

    Hey Ratha - awesome work mate, and greetings from Australia. I have a degree in mechanical engineering, and there's not one thing I would change about your design or execution. Well done. Respect. If I had a table like that I would be looking for an excuse to use it every day.

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      Thanks appreciate the words from a fellow ME!

    • @eddyhoek8919
      @eddyhoek8919 2 года назад

      Hey John, love your channel, you call it like it is about the auto industry with no bullsh*t! I've put a lot of friends onto your videos and one wants a new car so I gave him your link. Cheers from Eddy, Orstralya!

  • @GoughCustom
    @GoughCustom Год назад +2

    The design and execution is beautiful mate! You should be proud of that table!

  • @Oh6Torch
    @Oh6Torch 3 года назад +10

    1/2” top is the star of this build. I was quoted a small fortune for a 30”x48”x3/8” top. Can’t imagine how much that top set you back... Great build. Subbing!!!

    • @RathaSochenda
      @RathaSochenda  3 года назад +4

      I was able to purchase a remnant 5ft x 8ft x 1/2” thick plate in my neck of woods for about $400. I could of saved another $60 bucks had I had them cut it down to 3.5ft x 5.5ft. But I figured it was nice to have extra for future projects. If I purchased a new 4x8x1/2 thick plate it would of ran me $560. So I guess it kind of all depends... The crazy part is I actually wanted 3/4” thick plate just to future proof it for life. But that was $$$. Thanks for the sub!👍

    • @markfryer9880
      @markfryer9880 3 года назад +1

      @@RathaSochenda A think that a 3/4” plate would have been too much for you and your engine crane to deal with.

    • @davidpaterson2643
      @davidpaterson2643 3 года назад +1

      @@markfryer9880 I agree, those cranes are only good for 500kg at full extension (where most people exclusively use them as any shorter is useless).

    • @cecilandrews7479
      @cecilandrews7479 5 месяцев назад +1

      This is a great build and well thought out.

  • @wolfiemcwolf6617
    @wolfiemcwolf6617 4 месяца назад +2

    Great build! Outstanding process used with "basic" tools. I would say that this is comparable to anything produced by big companies with hundreds of thousands in tooling. Truly genius bud!

  • @rocketoba
    @rocketoba Год назад +10

    Impressive design, I especially love the table top leveling system you designed.

  • @kulaniscap
    @kulaniscap 2 года назад +1

    Beautiful, just beautiful. The engineering, the film, just Beautiful.

    • @RathaSochenda
      @RathaSochenda  2 года назад +1

      🙏🏽

    • @kulaniscap
      @kulaniscap 2 года назад

      You’ve inspired me man, God Bless you to do more💪

  • @cliffordcooley1273
    @cliffordcooley1273 2 года назад +7

    Beautiful welding table. I love how you engineered future leveling under the surface. Brilliant!

  • @muhammadmehdi6937
    @muhammadmehdi6937 3 года назад +1

    The Best of the Video is the Peace and Confidence.
    Excellent Design Brother for Better Creation.
    Bravo from Pakistan.

  • @jeffreystroman2811
    @jeffreystroman2811 3 года назад +7

    One of the most difficult metal working tasks I have found is to drill a hole in an exact location compared to multiple other holes. That you were able to DIY the top of a welding table is downright amazing

  • @juanmoorethyme3119
    @juanmoorethyme3119 3 года назад

    This is what youtube was created for. You should have 500k subs, min. Amazing work, amazing vid. Good on you.

  • @jameswieler3295
    @jameswieler3295 3 года назад +3

    Am I the only one who's geeking out over the ratcheting feet/casters?

  • @mrbigman190
    @mrbigman190 2 года назад +1

    .....un tavolo performante sotto ogni punto di vista, grande cura, grande precisione, cura dei dettagli, ottimo sistema di livellamento del piano......complimenti.

  • @roxifbabyyy
    @roxifbabyyy 2 года назад +5

    A year later and this video has proven to be amazing. Great work Ratha! 🎉

  • @Shrubtastic
    @Shrubtastic 25 дней назад +1

    I really like how you set up the adjustable top. I’m going to incorporate that into my table.

  • @garyschopshop
    @garyschopshop 3 года назад +11

    Mate this is excellent, everything about this table is great so well thought out and the finish is out of this world! I would pay big money for a table of this high quality!

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Glad you liked it🤙🏾

    • @skizilla
      @skizilla 3 года назад

      Seriously...that is professional level stuff.

  • @olddawgdreaming5715
    @olddawgdreaming5715 Месяц назад

    that's a very well engineered Welding Fixture Table. You and your little helper did a great job. You have reason to smile when you see it each day. FRED

  • @markfryer9880
    @markfryer9880 3 года назад +12

    Ratha well done with your welding table! As similar professionally made welding table costs @ $1800 Aussie dollars including clamping and fixtures. That table is smaller than yours. I did like the addition of the catch trays as they will be great for reducing how much crap falls down onto your tools stored below. A second benefit is when a screw or nut or something else small and value falls through the holes and it will, it will be easier to find it in the tray rather than searching through your stored equipment. I was surprised that the wood router and carbide bit worked so well as a Carpenter of 36 years I was actually expecting disaster. I thought that the 3 inch hole centre’s was an interesting choice. Have to think about that one and see how it works for you. You will find the table is great for cabinetmaking projects but be prepared to oil your table first with a canola oil spray like used for cooking and to lay down wax proof paper when doing a large glue up because there will be glue spills and runs no matter what. Same thing goes for painting items, a protective surface benefits your project and your welding table.
    Mark from Melbourne Australia

    • @SH19922x
      @SH19922x 2 года назад

      A decent 1200mmx2400mm table in Australia with a 12mm plate is going to cost $3500 minimum.
      Even worse if you want a fixture table.
      $1800.. what a laugh

  • @timham3125
    @timham3125 Год назад

    Phenomenal build. Better than any "affordable/diy" commercial table out there!

  • @ghentrosson8945
    @ghentrosson8945 2 года назад +3

    Amazing workmanship!

  • @user-bf9qj3im7j
    @user-bf9qj3im7j 2 года назад +2

    Sweet build, thanks for the video. I just had to rewind when I saw that blade on backwards, glad you caught it, no better way to smoke a blade. Though a backwards blade is a valid technique for cutting thin sheet or corrugated roofing etc.

  • @mcenteep
    @mcenteep 3 года назад +14

    Amazing engineering and fabrication. Looking to build my own soon and will be adopting some of your creativity. Great job!

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      That’s awesome. I’m glad this will help with your build.

  • @KatSeBladEngraving
    @KatSeBladEngraving 2 года назад

    Kudo's brother. This was my favorite welding table build video I have watched, and I watched a lot. Love your work.

  • @timothysoup7098
    @timothysoup7098 3 года назад +4

    Love the attention to details, especially being able to fine tune the surface to keep it perfectly flat. I've been trying to find a table I want to build for myself and I think I found it.
    Thank you

  • @jasonstuck7080
    @jasonstuck7080 3 года назад

    Im super glad to find someone else on youtube that uses my workflow for home projects.

  • @jeffanderson1653
    @jeffanderson1653 3 года назад +8

    Great design
    I can’t believe you drilled all those holes.
    I was looking to see where you bought it and how much it cost.

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      Thanks. Definitely had my work cut out for me with the drilling holes. Once I got the hang of it wasn’t all too bad. 🤙🏾

  • @bore95
    @bore95 15 дней назад

    WOW! Just wow! You really put in the work, both on this video and the table itself. Inspiring!!

  • @elbrujelito2649
    @elbrujelito2649 3 года назад +3

    Dude, my next goal would be creating something like this. The efforts you did from planning to creation are commendable. That's one beautiful welding table.

  • @peterhall6656
    @peterhall6656 3 года назад

    Greetings from Australia. What can I say other than that you are a God! The design and execution are simply first class.

  • @theyoutubeguy1545
    @theyoutubeguy1545 2 года назад +3

    What an fantastic video. Great balance between detail and efficient use of time with the video. Seems professionally done. Not only do you have incredible designing, building and welding skills, you’re also a great instructor and video maker. I’m so glad I found you, thanks! Oh yeah and the table is beautiful too

  • @joelsalto2731
    @joelsalto2731 2 года назад

    I'll lying if I said I ain't jealous of your garage and your welding skills. Bad ass table man

  • @_the_Chad_
    @_the_Chad_ 3 года назад +4

    Man... some nice work. I'd list out all the things I like but damn it's just all of it. Nicely done!

  • @CH-fy7xe
    @CH-fy7xe Год назад

    That is insane! (Insanely good!!!) Anyone would love to have a table this big and well done. I can imagine being able to do everything except drilling the holes in the tabletop in such a clean and repetitive pattern.

  • @Nick_Selleck
    @Nick_Selleck 3 года назад +11

    That was so relaxing to watch! Your voice is really calming to listen to and I love the build project. Great job!

  • @Valleysyder
    @Valleysyder 3 года назад

    It’s so awesome to see another Cambodian fabricator and welder , love the table and the swing out stool .. good job , keep doing these videos ! I’m subscribed ..

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Thanks Donny! I’m glad I could represent 🇰🇭🤙🏾.

  • @whunderwood
    @whunderwood 3 года назад +3

    absolutely phenomenal job on the fabrication. I will make some 'adjustments' to the current one sitting in my garage, using some of your ideas.

    • @RathaSochenda
      @RathaSochenda  3 года назад

      That’s awesome I’m glad the video helped👌

  • @gc7782
    @gc7782 3 года назад

    You deserve a medal for drilling all those holes! Excellent work!

  • @brucethomson2049
    @brucethomson2049 3 года назад +3

    Great job man. A couple of things I would have done differently is ordered the plate from a laser or water cut cnc place with the holes already done to match the pilot on your annular cutter. Then you can set your mag drill up on them and they will be good to go. The second thing is make the perimeter flat bar four pieces instead of lots of little bits. Every day is a learning day so enjoy the ride!!

  • @JMHUK82
    @JMHUK82 2 года назад +1

    I’ve been in the industry for 4 decades plus, though ur build was so so until u addressed the issue of flatness . Awsome solution to a necessary fix and can be adjusted after a year of work. Keep it up , you’ll do great my friend 👍👍

  • @MultiAsdfsdfsdf
    @MultiAsdfsdfsdf 3 года назад +4

    First off - Go Dawgs! Sub'd cos the project was awesome, filmed/edited perfectly and you come across as an awesome individual. Keep the projects coming.

  • @vitaminwaterpapi
    @vitaminwaterpapi 3 года назад +1

    This video might be the best homemade welding table on RUclips! So many details, very clear explanations. Good Job !!!

  • @audechilderes9402
    @audechilderes9402 3 года назад +3

    This dope man, love the build absolutely stunning, and love the coilover set up lol for leveling a very unique way to solve the unleveled area I dig it.

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Yeah those casters are a game changer definitely worth it

  • @franciscofilho9528
    @franciscofilho9528 Год назад +2

    Hello from Brazil. I'm here through the Oficina Garagem channel. Good work.

  • @ethanshawn583
    @ethanshawn583 Год назад +3

    good job bro nice weld😊

  • @josephcitizen4195
    @josephcitizen4195 2 года назад

    Impressed with you making the table top. Wow, at the beginning of the vid I was like, yea, normal fab stuff. I do that all day. I would have bet you bought the table top. Cool af. The hole jig was a great idea. Gonna watch the rest to see your tool layout. I'm sure I'll learn something.
    A little back ground. I'm a manufacturing engineer who designs (in Inventor) welding cells for a manufacturer of class 8 truck truck and trailer frames. Weld tables, weld fixtures, assembly fixtures, you name it. Around 38 part # specific weld cells in our shop with 120 welders in two shifts. Imma steal some of your ideas for sure, lol. Great vid man glad I ran across it. Subbed.

  • @kevintaylor113
    @kevintaylor113 3 года назад +4

    Solid design and perfect execution of your design! I’m gonna have to say, your son will probably be working from it soon in the future and I’m sure it will last for decades
    Well Done 👍🏼

  • @outback3791
    @outback3791 Год назад

    by far the best DIY Fixture Table build on RUclips. My plan is for a 4x8x.50 table with 3/4 holes on 2x2 pattern. That pattern is going to be a 2 to 3 solid days of drilling. Thank you for sharing. Liked and Subscribed.

  • @robotskirts
    @robotskirts 3 года назад +12

    This showed up in my recs too. Just a really exceptional build!

  • @flex-ranger2
    @flex-ranger2 5 месяцев назад

    One of the Best videos i've seen on youtube for diy. Such a great methodically planned and executed video. thank you

  • @ShadeAkeley
    @ShadeAkeley 3 года назад +7

    Really nice table, and those welds are really gorgeous. Subbed and I can't wait to see what you'll produce. Now that this video was recommended to many people, I bet your channel will skyrocket soon :) Great workflow, great skill, soft and no non-sense narrating and top notch videography especially for a small channel like yours. Keep up the good work and the efforts on that RUclips channel it will pay for itself soon enough :)

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Thanks 🙏🏽. This video performance definitely has helped the channel. Thanks for watching🤙🏾

  • @JonesingUSAF
    @JonesingUSAF 3 года назад

    One of the best recommended videos RUclips has ever given me! Great job bro!!

  • @SmartChannelSC
    @SmartChannelSC 3 года назад +11

    Отличная работа и респект мастеру! Шикарный сварочный стол! Мне о таком только мечтать, потому как размеры моей небольшой мастерской не позволят его разместить)

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Thanks really appreciate it!

    • @СергейЛойченко-р7й
      @СергейЛойченко-р7й 3 года назад +3

      Все листы с проката изогнутые , он его фрезеровал или выгибал , ровный как стекло .

    • @Рафаэль-з9з
      @Рафаэль-з9з 3 года назад +2

      @@СергейЛойченко-р7й он всю площадь на квадраты разбил и по углам регуляторы высоты, он же в конце показывал

  • @heartlandguy1
    @heartlandguy1 3 года назад

    Like wow who would have thought to attempt this without a CNC plasma cutter
    Made it look so easy , you’re very talented is an understatement
    Thanks for the video

  • @timconover5781
    @timconover5781 Год назад

    Excellent video, Thank You.
    I was just cruising the internet about welding tables and shocked at cost and shipping.
    this gives whole new direction for this project . thanks for doing the leg work for us .

  • @robey60
    @robey60 2 года назад

    I ended-up buying three of his plans and they are TOP NOTCH! Highly recommend them!!

  • @NikeMS11
    @NikeMS11 Год назад

    Now THAT is a labor of love! I can't even imagine. So impressive!

  • @uncleblack7322
    @uncleblack7322 3 года назад +1

    Your directions were precise...very well planned...you got great skills...enjoyed the vid...Thank You, Uncle Black...

  • @Jim-du9xv
    @Jim-du9xv 3 года назад

    I was a welder/fabricator for 45 years and I think you did a VERY NICE JOB!!! ( - :

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Thanks Jim I still have a lot to learn🤙🏾

  • @rusty3172
    @rusty3172 3 года назад +1

    Young man you have done a awesome job in designing and fabricating your table!

  • @gordonagent7037
    @gordonagent7037 3 года назад

    Ratha, firstly let me say how calming this video was, nice background music and you spoke so clearly for my old deaf ears. I love the content, this was a great project and I will be having a crack at it soon. Just subscribed so now I will go and watch more, thank you so much

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Thanks Gordon I’m glad you enjoy this video

  • @JamesLongOnGoogle
    @JamesLongOnGoogle Год назад

    that was an excellent build. I would not have thought of the leveling design. I really appreciate you taking the time to illustrate and explain that. great video.

  • @DanielSilva-dh1jv
    @DanielSilva-dh1jv 2 года назад

    Hi Ratha, I'm a welder, and your project added a lot to an idea I already had, I learned a lot, congratulations on your work.

  • @peteryeung111
    @peteryeung111 3 года назад

    Not sure how money you’re saving, the joy, satisfaction is priceless. Amazing job 👍👍
    Btw, your video editing is great. Good flow and easy to watch without loud musics

    • @RathaSochenda
      @RathaSochenda  2 года назад

      Thanks for watching. I’m glad you enjoyed this one

  • @reecewatson773
    @reecewatson773 3 года назад

    First video I've seen someone square up anything properly. Very well done. CNC router operator for 17 yrs. I watch lots of builds, you made the table build as easy and able to be done as quickly as possible. The ease of your leveling, best I've seen. May need to build one myself. I do both metal fab and wood working. Thanks keep up the good work.

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Thanks really means a lot. Just trying to do things right to the best of my abilities.

    • @reecewatson773
      @reecewatson773 3 года назад

      @@RathaSochenda humble, your abilities are understated. Keep up the good work, looking forward to going through your library...

  • @magnum357225
    @magnum357225 3 года назад +1

    Great job, the table looks amaizing!
    Just to give you a hint for the cuttning saw, if the video is correct u put the red disc the wrong way arround unless ur saw can change cutting rotation direction.

  • @jjfore0921
    @jjfore0921 2 года назад

    By far the best table build I’ve seen on you tube! Nice work! Your a true craftsman.

  • @Ron-FabandBuild
    @Ron-FabandBuild Год назад

    Good job Ratha. I like the table. I started with a small but not cheap table that I bought and still use today. I am going to build my own in the future and go with a custom size to fit my need and drill the top myself as well with my mag drill. Thanks for your video. As a fabricator myself I will be watching your channel as well. Again great job on the jig and build.

    • @RathaSochenda
      @RathaSochenda  Год назад +1

      That’s awesome. Glad the video help and thanks for watching

  • @ifitsnotbrokenfixit1193
    @ifitsnotbrokenfixit1193 3 года назад

    I don't know how I got suggested this but I'm glad I did. I've been using an old homemade table for a few years now. And I've been thinking about building a better one. The one you made is top notch. Thanks for sharing.

  • @brianhrycak4127
    @brianhrycak4127 3 года назад

    That has to be the most beautiful home made welding table ive seen yet on youtube.the time spent doing it right.helped with the end product being a beauitful work of art.

  • @FJ80Coop
    @FJ80Coop 3 года назад

    That's got to be the best diy home built fab table I've ever seen... Well thought out,made to a reasonable and easily workable size and dimensions,perfectly executed,and finished out to perfection... This from a 57 year old,45+ years welding and fabricating guy who has built a few welding tables throughout the decades ... Top notch work,and those table plate adjustment blocks are the s4it... Fine job there...

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Thank you for the kind feedback especially coming from someone like you that has been in the trade for quite sometime. It really means alot. Glad you like this table build!

  • @MrAircraftGuy
    @MrAircraftGuy 3 года назад

    Wow bro! No joke, excellent job. I’m jealous. You killed it.

  • @bigmotter001
    @bigmotter001 3 года назад

    Excellent job Ratha. I will be incorporating most of your ideas into my slightly smaller table. Thanks for posting and take care.

  • @ShainaReed30
    @ShainaReed30 15 дней назад

    wow the time effort and pride in this table...great work!

  • @MidAtlanticBracing
    @MidAtlanticBracing 2 года назад

    I enjoy your methodical work style--I found your video as I plan my own welding table. Sort of intimidating, and your ability is far beyond my own--but a great example of craftsmanship I plan to follow. Cheers!

    • @RathaSochenda
      @RathaSochenda  2 года назад +1

      Right on! This was my third metal fabrication ever. The first was my roofrack, then welding cart, then welding table. I still consider myself a newbie in this trade. To be honest its really just a mindset thing. It definitely was a challenge but at the end things just seem to work out.

  • @MrBrettStar
    @MrBrettStar 3 года назад

    I am now rethinking my table top for my CNC, I was going to weld rhs but then someone mentioned that they did that and it wasn’t flat and is now using a torsion box. Searching that came up with your video which looks like the best of both.

  • @hannibal2.067
    @hannibal2.067 3 года назад

    This video was pleasure to watch. Audio, video and narration were of the highest quality. Hell of a build young man.

  • @fabmakebuildcook6274
    @fabmakebuildcook6274 2 года назад

    Super legit build man! I've watched this video at least 4 times now :) Respect.

  • @restorick2378
    @restorick2378 Год назад

    Just came across this while I was searching Etsy for a DIY shop stool build. Simply fantastic! The thought, attention to detail and how you explained things was outstanding! Thank you for sharing - looking forward to seeing more great things coming from you in the future! Congrats!

  • @JustJereInCalif
    @JustJereInCalif 3 года назад

    Outstanding workmanship and narration. Very clearly articulated and nicely conceived and executed.

  • @francais197
    @francais197 Месяц назад

    Thanks Ratha ,...for the 8ft * 4ft plans and the extra assitance you supplied me.

  • @fredio54
    @fredio54 3 года назад

    Love your soft voice tone, very warm and natural. Un poco de mexicano en alli? I thought so. Very thoughtful build, too. Amazing how well those diablo blades cut plate steel, isn't it. The only one I damaged so far was accidentally cutting a bunch of rust inside an old pipe. Your modesty goes a long way, too. 11/10 Was reminded of myself when i designed mine I audited all of the work surfaces in my life, desks, tables, benches, bathroom, kitchen, etc etc and discovered various patterns between standing vs sitting and min/max for each, then finalised on what I liked for each and still ended up wanting it adjustable in height. :-)

  • @erictaylor394
    @erictaylor394 Год назад

    Ratha, absolutely amazing build! So glad I came across this 2 years after you posted.

  • @Aastan
    @Aastan 3 года назад +1

    Beast of a table, you should be proud! This has been added to my list of projects for the future.

    • @RathaSochenda
      @RathaSochenda  3 года назад +2

      Thanks. Yes it definitely puts a smile on my face every time I work on this table 😊

  • @MrMEmEmEmEMEMEeeeeee
    @MrMEmEmEmEMEMEeeeeee 3 года назад

    After having my eyes water when I saw how much commercial fixturing tables cost, I began combing YT videos. Have just skipped through this one so far but it is far and away the most thoughtfully laid out one I've seen. Loved the cordless saw cutting 1/2" plate, sounds like my approach! Chamfering using the router was also pure gold.
    Thank you very much for all the work involved in shooting and editing, putting together the product link list as well as the links to various sections within the video.

  • @steveaylor376
    @steveaylor376 3 года назад

    Bruhhhhh ... This DIY table is sick. Great design - thanks for sharing and creating this video!

  • @FastEddie203
    @FastEddie203 2 года назад +1

    Great job,love the type of casters you used.

  • @steventwiddy3402
    @steventwiddy3402 2 года назад

    Man I’ve got to tell you, you really have your crap together, what an amazing job of planning, designing and building a table as good as you could find anywhere……….

    • @RathaSochenda
      @RathaSochenda  2 года назад +1

      Thanks. I’m doing my best 👍

    • @steventwiddy3402
      @steventwiddy3402 2 года назад

      @@RathaSochenda I know your father has to be very proud of you and I thought it was really cool that you had your lil man out there helping you, I miss those priceless moments with my kids

  • @Stelios.Posantzis
    @Stelios.Posantzis 3 года назад +1

    This is very impressive work - best I've seen this far.
    I love the castor feet, they look superb! It shows some serious research has been done into this design.

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Thanks for noticing the details!

    • @Kelvinkid100
      @Kelvinkid100 3 года назад

      Ya I have seen similar casters in another video and that design has always stuck with me.They are definitely the way to go.👍

  • @claudemaggard7162
    @claudemaggard7162 6 месяцев назад

    Good job drilling those holes. That was impressive. Very impressive.

  • @MrEllhel
    @MrEllhel 3 года назад

    Respect from germany Brother.......perfect work, and a wonderfully calm voice

    • @RathaSochenda
      @RathaSochenda  3 года назад +1

      Thanks 🙏🏽

    • @MrEllhel
      @MrEllhel 3 года назад

      @@RathaSochenda I am a old guy... (52 Years old)..... working since 35 years in Metalbuisness as a pro... but what you build is awesome

  • @mikefrench6404
    @mikefrench6404 2 года назад

    Nice work bro! Great craftsmanship! A problem was never a possibility you couldn’t overcome. you found great ways to make a great table. Be proud!

    • @RathaSochenda
      @RathaSochenda  2 года назад

      Appreciate it Mike. Makes me smile every time I work on the table.

  • @cornelburger
    @cornelburger 2 года назад

    Best video I have seen on welding table. Wish I saw it before building mine.

    • @RathaSochenda
      @RathaSochenda  2 года назад

      🙏🏽. You could always build another one 😁

  • @tdmjason
    @tdmjason 2 года назад

    Don't give props to many peeps on RUclips. But you did a great job on the table . Might tackle my own now with your ideas.

    • @RathaSochenda
      @RathaSochenda  2 года назад

      Thank you! Nice I’m glad the video helped!

  • @stephenormsby3662
    @stephenormsby3662 3 года назад

    Pro job on both the design and fabrication. I’m using a number of your ideas on the one I am building. Thanks so much for sharing.

    • @RathaSochenda
      @RathaSochenda  3 года назад

      Thanks Stephen. Glad it gave you some ideas 🤙🏾 on building yours.