My wife called and said that this just started happening to our faucet today. I haven't had a chance to look at it yet, but I told her that it was probably the sprayer. Now I'm very very confident that it is! I'll update when I get home. Thanks, Steve!
Thanks brother! My sink has been doing the same thing for months and kept getting worse. I took nozzle off sprayer, reseated and tightened and problem gone! Thank you!!!
Good deed and great service for making a valiant effort to find the sprayer Steve. You just saved her $100 for the faucet and who knows how much for labor! Class act friend! 😎💯☝️👍👌💥
My sink looks almost identical. I replaced the main faucet o-ring and it still machine guns. I will check my sprayer next. Thanks for the video. Hopefully the sprayer is the issue and an easy fix.
Keep an assortment kit of rubber o-rings on hand, replace the o-rings on the hose since you pulled it off and then the sprayer head should unscrew from the sprayer handle, pull that piece out and there should be another probably plastic piece that comes out and you should find an o-ring on that/in there, swap it also. Should do the trick. Hope this helps someone.
I have a similar problem. I usually take the sprayer apart And clean out with vinegar. Why does the sprayer cause this hammering? Does it not fully cut off?
Good fix Stever. You got it in the truck. Nice lady means good outcome means good Karma for all involved. My pappy used to say you get more bees with honey than with vinegar. Ain’t that the truth!!
I had a toilet that made noise after flushing it. Called a plumber to find out that I had the shut-off valve for the water supply on it not turned up enough.
Looks like a Moen. I just installed 2 of these Moen.. they work nice. Moen has best customer service.. if you call them, I'll bet they'll send you a new faucet.. they send you broken parts for free on their products.. at least they used to.
Can Someone give me any idea about that I have basement kitchen faucet has same problem it’s escalated this other main kitchen faucet both has same problem and also they have spray ?
Steve you need to charge extra to take an oscillating facet to regular facet, people pay extra for that, just kidding, the You Tube was boring, when you truck was down, glad your back. Good job Steve, you try your hardest to make the customer happy.
Having bit of a similar experience, except mine doesn’t shake like that. Instead you hear the loud vibration noice when you turn on the hot water and it’s hot enough past a certain pressure point then you hear the hammering but not sure where it’s coming from exactly. But it’s only the kitchen sink in my house.
Could this be the same result? I’m trying to diy but can’t figure. The spout is fine sink and faucet runs smoothly it’s just built up pressure I guess but it only happens when hot water in kitchen is on
My wife called and said that this just started happening to our faucet today. I haven't had a chance to look at it yet, but I told her that it was probably the sprayer. Now I'm very very confident that it is! I'll update when I get home. Thanks, Steve!
8:20 "I'm fecking useless" husband in the background. Too funny.
Now that's a good fix ... I liked that woman and her attitude and charm ... Good vid ...
Thanks brother! My sink has been doing the same thing for months and kept getting worse. I took nozzle off sprayer, reseated and tightened and problem gone! Thank you!!!
It's nice to know we still have people that know how to fix thing, instead of just replacing the whole fixture.
My dad the Plumber saved a lot of old stuff in his shed saved his customers money most of them thrifty like him good job Steve!
I just want to say this video worked for my kitchen sink. Thank you so much. No more hammer water. 🙌🙌🙌🙌🙌
Your a good man Steve, determined to fix it and save the lady money having to buy a new one
You're the best Steve! Glad you're back on the road.
Steve looks like he surprised HIMSELF ! Good find in the warehouse truck ! Keep them old parts !
"Steven save the day". You are a good guy steve. wish you a good health and much more money.
Great job as always. Glad everything worked out with your truck. Your subscribers love your videos and miss the daily postings when you have an issue
Great job Steven!! One of the nicest customers you have worked for!!!
Yes she was sweet and laid back.
Good deed and great service for making a valiant effort to find the sprayer Steve. You just saved her $100 for the faucet and who knows how much for labor! Class act friend! 😎💯☝️👍👌💥
Lav Saves the day of Course " He's Probably Got it in the Truck "
Love this man. Same problem I'm having. Brilliant!
What an absolutely sweet woman. Some people are so nice.
Yes indeed!
My sink looks almost identical. I replaced the main faucet o-ring and it still machine guns. I will check my sprayer next. Thanks for the video. Hopefully the sprayer is the issue and an easy fix.
Karma is real and you are definitely building up the "good" kind! And the lady was very nice and had a good perspective on things.
Keep an assortment kit of rubber o-rings on hand, replace the o-rings on the hose since you pulled it off and then the sprayer head should unscrew from the sprayer handle, pull that piece out and there should be another probably plastic piece that comes out and you should find an o-ring on that/in there, swap it also. Should do the trick. Hope this helps someone.
Hey Steve! Steve Lav safes the day! That's why you drive a bread truck!
He “kneads the dough.?”
@@Samlol23_drrich 🤣
One person's junk, another person's treasure.
This was my exact problem, thanks for helping me!
That faucet sounded like a machine gun! Steve to the rescue!
The job The commentary The accents 😂 thanks good stuff
You sure this isn’t a dawn commercial, nice save
Good job man. I like how you don't just change stuff. You actually try and fix it if you can.
Quality Mama.....it is all plastics....
Longshanks was the guy from Braveheart......William Wallace (Mellie Gibson) wanted a new one too.
You remind me of my grandfather, saved stuff like you and ended up with many fixes!
Good job! No one else could have done that! 👍👍👍They wouldn't have had the part.
You and your plumbers mouth love it
Great job! Missed the videos. Hope all good and the truck keeps going.
Good find nice lady..👍
Man great job hanging in there to help them out and get it fixed!!!
What kind of camera and stand u have
Steve to the rescue again 👏 🙌
I have a similar problem. I usually take the sprayer apart And clean out with vinegar. Why does the sprayer cause this hammering? Does it not fully cut off?
Not satisfied until you figure it out, great job 👍
Good fix Stever. You got it in the truck. Nice lady means good outcome means good Karma for all involved. My pappy used to say you get more bees with honey than with vinegar. Ain’t that the truth!!
Good afternoon Steve!!
Steve saves the day again!!
Great Job Steven, we missed you and Miss Molly
I had a toilet that made noise after flushing it. Called a plumber to find out that I had the shut-off valve for the water supply on it not turned up enough.
Nice job Steve
Finally didn't get a Bluon commercial 😂
Berry nice to work like that. Have kind understanding
helper.
Saved the day!
Thanks again for the videos!
🥃🥃🍺🍺🍺🎳⛳
Stay safe.
Retired (werk'n)keyboard super tech. Wear your safety glasses!
Nice save.
Steve's portable tame black hole comes to the rescue yet again!
Great diagnosis and fix!
Hello Steve!
Great job man,I need a new unit myself,sprayer works but the faucet still goes to ,O well lol.someday soon.
Great fix!
Looks like a Moen. I just installed 2 of these Moen.. they work nice. Moen has best customer service.. if you call them, I'll bet they'll send you a new faucet.. they send you broken parts for free on their products.. at least they used to.
Had this same problem once. I recall that it was something with the mechanism in the button on the handle that had broken.
Nice work buddy 😁
Very cool! Steve saving the day again
Steve is back at it again mama
Can Someone give me any idea about that I have basement kitchen faucet has same problem it’s escalated this other main kitchen faucet both has same problem and also they have spray ?
This was a very nice women Steve and I think she liked you. She was so nice to you. You were so nice to her and I respect you Steve.🥰🙋♂️👍🏻💒
I just tried it... it worked for me.
I never would have figured out that the sprayer was causing the faucet to do that.
lol that's why you not a plumber
@@snicks50 Yup. You and me both.
Sa-weet!!
cool video steve hows miss molly i lernd alot of fixing bolier and clean out the filter
Yóu the man Steve. Sometimes yóu need to dig deep. Nice job.
That was really great.
Mine just keeps noisily switching modes from stream to spray and I don’t know what to do :/
Steve you need to charge extra to take an oscillating facet to regular facet, people pay extra for that, just kidding, the You Tube was boring, when you truck was down, glad your back. Good job Steve, you try your hardest to make the customer happy.
I like that lady's voice. Good job 👍
Impressive!
reminds me of the trouble in Athens... people aren't waking up as normal. Dawn is "tough on Greece"
That was a crazy one.
Thank you
So, what the problem? You put the same sprayer, right?
"how much shit is in there" i will be kicking you out of my house!
This was today man it’s 100 in California
Hi Steve!!
I’ve got the same problem at home!
Well done Steve. How did you charge her then?
May the 4th be with you.
"Gunslinger" pow,pow
I have the same one and its doing something very similar
New sprayer fixes that problem every time for me, no idea why.
I was worried about ya the last two days! May sleep better now!!!
"Let me look in my drawers and see what I can find....."
Hi Steve
May the forth be with you LOL
When don’t upload one day we get concerned
Hey Steve and Miss Molly! Workin’ again y’all. 👍👍
Multi generational experience.
I have the same problem with mine and its the same brand.
Steve is determined to fix that vibrator for the nice lady....
Having bit of a similar experience, except mine doesn’t shake like that. Instead you hear the loud vibration noice when you turn on the hot water and it’s hot enough past a certain pressure point then you hear the hammering but not sure where it’s coming from exactly. But it’s only the kitchen sink in my house.
Could this be the same result? I’m trying to diy but can’t figure. The spout is fine sink and faucet runs smoothly it’s just built up pressure I guess but it only happens when hot water in kitchen is on
it dose sound a lot better tbh
It is doing that because it is made in China....
The lady should trade in her husband for Steve.....he's a fixer and.....a keeper....
Steve.....you're worth more money!!!!!
That woman really talks too much.
Come on..
No need to go instantly online buying a new one while he's still there trying his best.
a little chooch goes a long way