When I first started I bought all cheap tools and upgraded the one's I found I needed. That was back before the internet, so it was hard to get good advice. Also a friend of mine told me to make a router table. But I really didn't have the confidence starting out, so bought as small one. But it wasn't long before I made myself the kind of router table you could put in your living room! (Well, not quite, but it looked like a chest of drawers!) I'm going to be starting over again soon, hopefully, and will start with a jigsaw, router and electric drill. Then I intend to make everything I can. Router table, saw table, spindles sander, sanding disc, possibly a drum sander, lathe, drill press and so on and so on. I'm also really restricted for space so I'd be better off making stuff that fits into the space I have. Good job on selling a table for good money.
Dumpster Dive for your wood. Construction sites throw away perfectly good lumber all of the time. Start with small projects that are easy. Coasters, cutting boards, bird houses, flower boxes, etc, and work your way up.
WoodFixer.xyz is an amazing book about woodworking. I`m a graduate of a one-year carpentry course from a local tech college. Of all books I`ve read during my study about carpentry, I think this is the finest book I`ve read so far. It explains everything regarding woodworking as well as complements it with helpful photos.?
when I was first setting up my shop I looked for used tools on the Internet in local classifieds. I basically looked for things that were cast iron, and at least 30 years old. usually the tools from then go really cheap because no one wants them. However they are by far the best way to go for being able to stand the test of time.
here's a few things to think about before you start your own woodworking company Will you get support from your family? Are you self-motivated? Will you carry out your plan? Do you have the funds to go ahead? (I discovered these and the reasons they work on Enata wood system site )
hey ,if anyone else trying to find out small woodworking business ideas try Letza Woodworker Lessons (do a google search ) ? Ive heard some pretty good things about it and my brother in law got amazing results with it.
here's a few tips to think about before you start a woodworking company Will you have support from your spouse? Are you self-motivated? Will you carry out your plan? Do you have the funds to begin? (I learned these and the reasons they work on Enata wood system site )
Thank you for this! I've had this love for woodworking for a while now but just getting a garage shop together. I've made a couple end tables and coffee table with the few tools I have and the lack of skill and still have all my fingers. I'm trying to learn more and a video like this help. Much appreciated.
I used to work in construction, so I already had invested alot through the years...but! The best buys I ever did, where secondhand professional tools. Sometimes it takes a while before you encounter a true gem, but it is totally worth the wait! I started off with just a jigsaw, drills and sandingmachines and obviously did alot of smaller and rough work. 2Years ago I had alot of tools for free from an old lady and had major luck, I just needed to help her out and i could take whatever I needed from her former husband's workshop. Over the years I accumulated alot of professional tools from auctions, second hand websites etc and still am looking out for some things to improve, but i totally recommend it! And get the word out! Sometimes people remember you looking for something and when they cross something, they'll tell you !
Really good video man. Over the years I've had tools and sold tools. Now that I'm thinking about getting back into woodworking hot and heavy I definitely appreciate videos like these. The only thing I would highly recommend that you didn't mention is an air compressor.
Griffin Benchmark yep for many an air compressor and brad nailer is a necessity. Rarely comes up in the stuff i do, but my good friend uses his on everything. Thanks for the tip!
Excellent video. I like how it just gives you the bottom line on how to get started, so you don’t have to watch 12 other videos. I’m an intermediate level woodworker and agree with everything you’ve recommended. Keep up the great work!
Awesome video Mike, you really don't need a whole lot to get started in woodworking. You just have to get out there and start making something! Keep the videos coming!
There are several ideas to consider before you begin a woodworking business are you likely to have help from your spouse? Are you self-motivated? Will you stick to your plan? Do you have the money to begin? (I read these and why they work on Enata Wood System site )
Good job on this. I'm broke and getting into it so I'll throw a suggestion. As the man says, you can always upgrade. I've got a $30 black and decker jigsaw. Not the best, but with some decent blades it makes cuts and continues to keep on ticking. I find some craftsman, ryobi, and harbor freight tools to be satisfactory as well. Just the 2 cents from someone just starting to get serious about the craft.
+PoorKidOne i couldn't agree more. People often get caught up in brands. A hobbyist doesn't need a tool that can still work after being dropped off a roof.
I'd say it's also worth mentioning Craigslist. With some patience and luck you can score some really great deals on there. I was able to buy my planer, jointer, miter saw, and table saw from CL.
Nice! Thought I would share my first power tools. 1)Jigsaw 2)Drill - corded 3)Sander (Though I accidentally bought a finishing sander instead of a rotary orbital) 4)Bench Grinder - It was on a garage sale for $20, so what the heck 5)F clamp x2
got into woodworking about 2 years ago..I learned how to do dovetails box oints ECT.. they were by hand at first .. I am building a pocket hole jig today..I want to build some cabinet doors and the jig will be used for the stiles and rails keep up the good work
I'm just getting into wood working and I've been on swapmeets finding all my tools, this last week i found a ryobi set which had 2 drills, a circular saw (small 4 inch) and a vacuum, with a battery and 2 chargers all for $15 lol and ive been using all of them. also found a handy toughest plunge router brand new in its box for $20. ive found even more but ive been also buying and selling some people just don't know what they are selling sometimes.
Great video! I feel like I went down this road just the same. Craigslist was and still is at times, my best friend. Ultimately some of the projects I love the most were made with like three basic, rusted up tools that were given to me.
good useful video for people just starting. I watch a ton of woodworking videos every day so I am going to give yours a chance. I think the successful ones are the folks who are friendly, humble and energetic. Remember to keep looking at the camera cuz I am on the other side. Good luck.
The combination square (right) and the speed square (left) are both useful tools, but the speed square is more commonly used in construction. The speed square can be used for determining angles quickly. Some combination squares can do this too but not the one he has.
Thank you. I have all that but the table saw. I also have a wood burning set and I use Acrylic paint and wood sealer. the only thing I do not have is a sturdy work table. I have seen patterns for work tables but they are too complicated for me to try because I do not have a table saw. I have a regular table, but it is not sturdy enough to do wood work on. I was given a grinder and a vise.
Man i always wanted to get into wood working... Ive been told my gandpa was a master woodworker... He passed when my dad was 17... I unfortunately aint blessed enough to meet him in person... I wish i could... Dad aint into wood working... But i sure am... Anyway tnx man... Ill look into your advices... ❤
Have you head of shop smith? You can buy a sed mark five for 350- up to 1500 depending on condition but the quality is excellent parts are cheap and they have 5 machines built in thus the mark 5. lathe, horizontal drill/vertical drill press, table saw, sander, and bandsaw I believe...
The author does like to from scratch, ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
I think good drill bits are really underrated. Just a few sizes of Forstner bits say 1/2" ,through 1" and brad point bits down to 1/8" is a good start. Fill in the other sizes with an array of twist drills, it's always good to have the perfect size for the job. Same goes for router bits. You can make cheap tools work really well with good sharp blades and bits.
Think I was just bitten by the woodworker bug. I just finished refinishing some 200 year old barnwood beams for shelving and now want to do more. It was so relaxing and I didnt want to stop. I found a lot of stuff on craigslist....
Still needing to get a circular saw even though I've been doing this for 20 years. If I ever really need one, I just borrow it. Still, would be great to finally get my own
Just bought a new set of spade bits..walmart..Im sure Harbor Freight has them. The package was hard to get off ..took scissors started to cut and started to remove the spade bits. My SOP. Then AN AHA MOMENT. I looked and realized that I could remove just the top plastic. I put the package on a screw ..perfect..I don't need a special case etc..it comes with one.
Got the weed wacker going too.. I don't really like using it, but it's cordless and I dislike dragging cords around even more. Luckily it's still cold out so no weed wacking for awhile.
If I could go back in time...I'd buy a Bosch jigsaw instead of the massive RIDGID one I bought. The Harbor Freight clamp you want is item #96210...it's crazy how I have that memorized...I may have done a video or 2 on those clamps. Good info nevertheless.
Right now, it's just 3/4" ply with 1/4" waxed MDF on top to make it slick. I used my router's base plate as the template and cut 4 holes to make it fit. The whole thing rests on 4 bolts and is not even permanently attached. It's the quickest, dirtiest thing in my shop haha. I made it on the fly one night when I needed it immediately. I'll think about redesigning it soon.
Mad Raven Woodworks ah so you just put some bolts into the fence rail slots? Didn't think of that. I made some hardwood runners to go in those slots, but have no idea how to attach the runners correctly to the "table top" piece of wood I made. I'll have to try that out.
i made a router jig in high school to make the eastern maple look like it was a bunch of planks together rather than one continuous grain of wood. It looks way than what it did before and was heaps cheaper than using real wood.
great vid: I take issue with one thing, which is I never get ryobi products. They always break, def not worth it. rigid is a good quality cost ratio, but it depends what kind of tool. Bosch and DeWalt will not fail you, even if it costs a bit more
I payed 30$ for a 20 ish piece desalt but set, and 30$ for a ryobi spade&wood Bit Kit and a 60 ish piece kit... 99$ for a ryobi Drill and impact driver w/ 2 batteries and a charger, a ryobi circular saw for 45(bare Tool Version) and 50 something for a ryobi weed Wacker(we needed one lol) that came with another battery and charger. All from the one + lineup. I’m a 15 year old starting a wood shop, and I couldn’t recommend ryobi enough. Also, I got the same clamps at harbor freight which are great, and there were deals going on so if I bought anything I got a magnetic parts tray and a microfiber rag set... tools I wouldn’t trust so much.
Problem is. I want to learn it but I don't have enough experience to get a job in woodworking. Only source of experience I have is school and internships. But I want a job too.
Hey bro, I work as a painter but I'm also doing woodworking projects in my backyard to get some experience and begin putting together a portfolio so i can start selling what I make. You could do the same or something similar. Or you could always find a framing job as an extra hand just to get your foot in the door.
This t.co/z6o0f8z2H4 , is a very comprehensive woodworking book! It breaks every little thing down, utilizing words, drawings, real pictures, and different diagrams. It`s unbelievably informative and helps me feel like I could help my sibling while we make our furniture together.?
thanks for this video. I am just getting started in woodworking and not sure where/how to sell my products once I can make something worth buying. Do you have suggestions on where/how to get started selling? How did you start and how do you sell your products now. Thx again
I may have missed it, but what about a hand saw? I'm just starting out but I inherited a few things from my dad. One of them is a basic hand saw. Some electric tools (a router, I think), but I have to go through them properly. Dad's not dead, though. At least, not that I'm aware of. >
This isn't really "on a budget" that's what i was expecting to watch .. but you di choose the best and handy tool for doing many tasks working on wood .. i got a drill a circular saw i do not have any table saw , router , jigsaw or miter saw... anyway for my hobby woodworking it is pretty good .. i'm considering of buying a jigsaw but i think your shop it is more a professional woodworking shop than a hobby shop .. .thanks again for pointing out many useful tool indeeed :-)
Nate Adams thanks buddy! I haven't had much down time in the last two weeks haha. My days have been wake up, go to work, go to school, come home, shoot a video, edit a video, and go to sleep. Repeat.
I know this is a pretty old post but, any good recommendations for buying your first bandsaw? Is it worth buying a cheaper $200 model or a waste of time? Any brands or size bandsaws you would recommend for quality, multi-functional and on a budget?
Good vid, thanks. I'm retired and looking for a hobby and woodworking (vs. blacksmithing / in a Condo) looks good to me but unfortunately I'm limited to a small space (half of a two car garage) and to be honest I'm not all that comfortable with powered hand tools (saw especially). I'm trying to find a used (inexpensive) combination machine (5 in 1, preferably more) like a EMCOSTAR (6 to 16 functions). The cheapest combo machine I've seen was a 5 in 1 (brand?) for about $4500, Ouch! Thank-you for the time.
Since that comment, based on various videos I've considered that with extra care using hand power tools will be ok (even a saw). ;-) There's also several videos of ingenious ideas on building a multi-function work table with tools that rotate, flip over, lift up, etc... some from hidden compartments. if designed correctly (bang for buck, space) this would be my first project. :-)
Hello mate, I have never work with wood before but I want to build an "L" desk, hopefully I am not totally wrong but I fear I may be, my plan is to buy 1"x6"x10', cut 4 pieces of 6"x5' and glue them togheter to get a 24"x5' rectangle, is it that easy?, or even possible if I don't have equipment ( table saw, clamps, etc)? Do you thing I would be able to get a flat top on the desk? Will I need to buy a power tool? I'm sure this is a silly question, please bear with me.
I made the mistake of buying a Ryobi jigsaw. Blades are a serious issue. Apparently, their T-shank mechanism isn't friendly to other brands AND I can't find any Ryobi blades... Insanity. What that has effectively done is turn me away from the brand as I replace my corded tools with cordless in favor of Dewalt, Milwaukee, or Makita. Sometimes cheap is just cheap.
Look for high quality used tools, most of the time you can an excellent quality cast iron top contractors table saw for much less than a cheap job sight saw.
nice video, thanks! how about space? can you really afford spending 1000 or so dollars on rent or is this meant to be for those that have basements in house?
There are a few suggestions to think about before you setup your own woodworking business Will you get support from your spouse? Are you someone who is self-motivated? Will you carry out your plan? Do you have the money to begin? (I learned these and why they work from Enata wood system site )
Nice video, what would you recommend to a college student with a max of $100 to spend? Is it possible to get into the trade with that little of funding?
Brandon Reddish I think it is definitely possible. Home depot/lowes has circular saw/drill combos for around that price and they usually throw in some other extras, check Craigslist for some used tools such a jigsaw, circular saw, or drill to start on. When i first started I only had a hand saw and a drill from craigslist and it takes some more time and thinking, but i could start making some things. Also, if you are in college, check to see if your school, physics, engineering department has a machine shop that they would let you use. 👍 hope the best for you!
When I first started I bought all cheap tools and upgraded the one's I found I needed. That was back before the internet, so it was hard to get good advice. Also a friend of mine told me to make a router table. But I really didn't have the confidence starting out, so bought as small one. But it wasn't long before I made myself the kind of router table you could put in your living room! (Well, not quite, but it looked like a chest of drawers!)
I'm going to be starting over again soon, hopefully, and will start with a jigsaw, router and electric drill. Then I intend to make everything I can. Router table, saw table, spindles sander, sanding disc, possibly a drum sander, lathe, drill press and so on and so on. I'm also really restricted for space so I'd be better off making stuff that fits into the space I have.
Good job on selling a table for good money.
Dumpster Dive for your wood. Construction sites throw away perfectly good lumber all of the time. Start with small projects that are easy. Coasters, cutting boards, bird houses, flower boxes, etc, and work your way up.
Here are some great woodworking plans if you are interested: HootWood. com
Chris Denney z
WoodFixer.xyz is an amazing book about woodworking. I`m a graduate of a one-year carpentry course from a local tech college. Of all books I`ve read during my study about carpentry, I think this is the finest book I`ve read so far. It explains everything regarding woodworking as well as complements it with helpful photos.?
Lucky me lives right next door to one of these places. :) get all sorts of stuff
@@JohnSmith-bd3xh That website doesn't seem to exist. At least not anymore. Do you know of any other websites?
when I was first setting up my shop I looked for used tools on the Internet in local classifieds. I basically looked for things that were cast iron, and at least 30 years old. usually the tools from then go really cheap because no one wants them. However they are by far the best way to go for being able to stand the test of time.
here's a few things to think about before you start your own woodworking company
Will you get support from your family?
Are you self-motivated?
Will you carry out your plan?
Do you have the funds to go ahead?
(I discovered these and the reasons they work on Enata wood system site )
hey ,if anyone else trying to find out small woodworking business ideas try Letza Woodworker Lessons (do a google search ) ? Ive heard some pretty good things about it and my brother in law got amazing results with it.
here's a few tips to think about before you start a woodworking company
Will you have support from your spouse?
Are you self-motivated?
Will you carry out your plan?
Do you have the funds to begin?
(I learned these and the reasons they work on Enata wood system site )
totally agree! that way i found some of my best tools I ever got!
Hand tools are a good first step, even before investing in a bunch of electrical equipment if people are just starting out
Hammer+handsaw=everything 😃
Thank you for this! I've had this love for woodworking for a while now but just getting a garage shop together. I've made a couple end tables and coffee table with the few tools I have and the lack of skill and still have all my fingers. I'm trying to learn more and a video like this help. Much appreciated.
I used to work in construction, so I already had invested alot through the years...but!
The best buys I ever did, where secondhand professional tools.
Sometimes it takes a while before you encounter a true gem, but it is totally worth the wait!
I started off with just a jigsaw, drills and sandingmachines and obviously did alot of smaller and rough work.
2Years ago I had alot of tools for free from an old lady and had major luck, I just needed to help her out and i could take whatever I needed from her former husband's workshop.
Over the years I accumulated alot of professional tools from auctions, second hand websites etc and still am looking out for some things to improve, but i totally recommend it!
And get the word out! Sometimes people remember you looking for something and when they cross something, they'll tell you !
Thank you! Your friendly advice and enthusiasm has given me more confidence to give this a go. Been wanting to get into woodworking for years now.
Really good video man. Over the years I've had tools and sold tools. Now that I'm thinking about getting back into woodworking hot and heavy I definitely appreciate videos like these. The only thing I would highly recommend that you didn't mention is an air compressor.
Griffin Benchmark yep for many an air compressor and brad nailer is a necessity. Rarely comes up in the stuff i do, but my good friend uses his on everything. Thanks for the tip!
Ruler should have measurements/increments engraved into it and not _just_ painted on (otherwise it will wear off with use).
This was way more useful than a lot of the "getting started" videos out there. (Looking at you, "Start with about $1,000 worth of equipment" videos.)
Excellent video. I like how it just gives you the bottom line on how to get started, so you don’t have to watch 12 other videos. I’m an intermediate level woodworker and agree with everything you’ve recommended. Keep up the great work!
Awesome video Mike, you really don't need a whole lot to get started in woodworking. You just have to get out there and start making something! Keep the videos coming!
The most used tools in my shop.. The first aid box and probably the radio 😁
Cheers! ✌🏽️
Luan T hope you still have all of your fingers
There are several ideas to consider before you begin a woodworking business
are you likely to have help from your spouse?
Are you self-motivated?
Will you stick to your plan?
Do you have the money to begin?
(I read these and why they work on Enata Wood System site )
I'm studying starting up a woodworking business and found a fantastic resource at Enata wood system (check it out on google)
Man you must be richer than me, I skip the first aid box and go straight to Duct Tape
Good job on this. I'm broke and getting into it so I'll throw a suggestion. As the man says, you can always upgrade. I've got a $30 black and decker jigsaw. Not the best, but with some decent blades it makes cuts and continues to keep on ticking. I find some craftsman, ryobi, and harbor freight tools to be satisfactory as well. Just the 2 cents from someone just starting to get serious about the craft.
+PoorKidOne i couldn't agree more. People often get caught up in brands. A hobbyist doesn't need a tool that can still work after being dropped off a roof.
PoorKidOne totally agree.
I'd say it's also worth mentioning Craigslist. With some patience and luck you can score some really great deals on there. I was able to buy my planer, jointer, miter saw, and table saw from CL.
Love that wall where you hang your tiny gadgets!
Im getting into wood working as a new hobby. Thanks for the information
Nice! Thought I would share my first power tools.
1)Jigsaw
2)Drill - corded
3)Sander (Though I accidentally bought a finishing sander instead of a rotary orbital)
4)Bench Grinder - It was on a garage sale for $20, so what the heck
5)F clamp x2
Mikhail Galatinov you can make a ton of stuff with just that setup!
got into woodworking about 2 years ago..I learned how to do dovetails box oints ECT.. they were by hand at first .. I am building a pocket hole jig today..I want to build some cabinet doors and the jig will be used for the stiles and rails
keep up the good work
PIANOSTYLE100 aà
I'm just getting into wood working and I've been on swapmeets finding all my tools, this last week i found a ryobi set which had 2 drills, a circular saw (small 4 inch) and a vacuum, with a battery and 2 chargers all for $15 lol and ive been using all of them. also found a handy toughest plunge router brand new in its box for $20. ive found even more but ive been also buying and selling some people just don't know what they are selling sometimes.
Great video! I feel like I went down this road just the same. Craigslist was and still is at times, my best friend. Ultimately some of the projects I love the most were made with like three basic, rusted up tools that were given to me.
good useful video for people just starting. I watch a ton of woodworking videos every day so I am going to give yours a chance. I think the successful ones are the folks who are friendly, humble and energetic. Remember to keep looking at the camera cuz I am on the other side. Good luck.
The combination square (right) and the speed square (left) are both useful tools, but the speed square is more commonly used in construction. The speed square can be used for determining angles quickly. Some combination squares can do this too but not the one he has.
The safety glasses. 😂 great video bro
Thank you. I have all that but the table saw. I also have a wood burning set and I use Acrylic paint and wood sealer. the only thing I do not have is a sturdy work table. I have seen patterns for work tables but they are too complicated
for me to try because I do not have a table saw. I have a regular table, but it is not sturdy enough to do wood work on. I was given a grinder and a vise.
Man i always wanted to get into wood working... Ive been told my gandpa was a master woodworker... He passed when my dad was 17... I unfortunately aint blessed enough to meet him in person... I wish i could... Dad aint into wood working... But i sure am...
Anyway tnx man... Ill look into your advices... ❤
keep grinding! loving your content and IG posts!
shhvance thanks man! I appreciate the words 🙏🏼
Have you head of shop smith? You can buy a sed mark five for 350- up to 1500 depending on condition but the quality is excellent parts are cheap and they have 5 machines built in thus the mark 5. lathe, horizontal drill/vertical drill press, table saw, sander, and bandsaw I believe...
The author does like to from scratch, ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
For a smaller channel it looks like you have some nice content. I'll for sure check out more of your videos. 👌🏼
I think good drill bits are really underrated. Just a few sizes of Forstner bits say 1/2" ,through 1" and brad point bits down to 1/8" is a good start. Fill in the other sizes with an array of twist drills, it's always good to have the perfect size for the job. Same goes for router bits. You can make cheap tools work really well with good sharp blades and bits.
Joe Cleveland very true!
Think I was just bitten by the woodworker bug. I just finished refinishing some 200 year old barnwood beams for shelving and now want to do more. It was so relaxing and I didnt want to stop. I found a lot of stuff on craigslist....
I chose to do part time woodworking on my downtime. As i am a builder i already have the tools, i just find woodworking very calming.
thank you. I would add a drill press, it's extremely important in my opinion and you can have a basic one for 80$. used ones can be even cheaper
Thinking about trying woodworking as a hobby. You should do a harbor freight tool buy/don’t buy video.
Thanks for the vid!
Still needing to get a circular saw even though I've been doing this for 20 years. If I ever really need one, I just borrow it. Still, would be great to finally get my own
Just bought a new set of spade bits..walmart..Im sure Harbor Freight has them. The package was hard to get off ..took scissors started to cut and started to remove the spade bits. My SOP.
Then AN AHA MOMENT. I looked and realized that I could remove just the top plastic. I put the package on a screw ..perfect..I don't need a special case etc..it comes with one.
Thanks for posting brother
Dont'y buy a plastic square. They break easily, get an aluminum one.
you forgot to mention a broom. You're definitely gonna want a broom! lol
LevitatorMusic hahaha #truth
True SAY haha
and a room to put everything in. a room/workshop is essential. Pro Tip: It'll keep your stuff from getting wet when it rains.
you mean SHOP VAC
A stick and some grass will work.
Got the weed wacker going too.. I don't really like using it, but it's cordless and I dislike dragging cords around even more. Luckily it's still cold out so no weed wacking for awhile.
Great advice! I saving for a table saw and I'll be set for some major projects!
If I could go back in time...I'd buy a Bosch jigsaw instead of the massive RIDGID one I bought. The Harbor Freight clamp you want is item #96210...it's crazy how I have that memorized...I may have done a video or 2 on those clamps. Good info nevertheless.
Why did you quit making videos? Your channel is awesome!
Hey Raven. Can you walk through how you attached your diy router table extension wing? I have the same saw and am looking at doing the same.
Right now, it's just 3/4" ply with 1/4" waxed MDF on top to make it slick. I used my router's base plate as the template and cut 4 holes to make it fit. The whole thing rests on 4 bolts and is not even permanently attached. It's the quickest, dirtiest thing in my shop haha. I made it on the fly one night when I needed it immediately. I'll think about redesigning it soon.
Mad Raven Woodworks ah so you just put some bolts into the fence rail slots? Didn't think of that. I made some hardwood runners to go in those slots, but have no idea how to attach the runners correctly to the "table top" piece of wood I made. I'll have to try that out.
i made a router jig in high school to make the eastern maple look like it was a bunch of planks together rather than one continuous grain of wood. It looks way than what it did before and was heaps cheaper than using real wood.
Nick Feness a
great vid: I take issue with one thing, which is I never get ryobi products. They always break, def not worth it. rigid is a good quality cost ratio, but it depends what kind of tool. Bosch and DeWalt will not fail you, even if it costs a bit more
Adam Lans aa
Great tips! I've been looking to find the best tools for the lowest price.
I payed 30$ for a 20 ish piece desalt but set, and 30$ for a ryobi spade&wood Bit Kit and a 60 ish piece kit... 99$ for a ryobi Drill and impact driver w/ 2 batteries and a charger, a ryobi circular saw for 45(bare Tool Version) and 50 something for a ryobi weed Wacker(we needed one lol) that came with another battery and charger. All from the one + lineup. I’m a 15 year old starting a wood shop, and I couldn’t recommend ryobi enough. Also, I got the same clamps at harbor freight which are great, and there were deals going on so if I bought anything I got a magnetic parts tray and a microfiber rag set... tools I wouldn’t trust so much.
This guy is so chill. Please just start reviewing random things
Problem is.
I want to learn it but I don't have enough experience to get a job in woodworking. Only source of experience I have is school and internships. But I want a job too.
Hey bro, I work as a painter but I'm also doing woodworking projects in my backyard to get some experience and begin putting together a portfolio so i can start selling what I make. You could do the same or something similar. Or you could always find a framing job as an extra hand just to get your foot in the door.
Great video!
Very informative and it made me laugh, so super thumbs up.
Thanks for the tips.
Great video man! I've been following you in IG, but just found you on YT. Great stuff.
Haha I really like this, I already have a majority of tools you mention, Also I love Harbor Freight too!
Now when you say "a budget", I didn't realize it could be what appears to be thousands and thousands of dollars :D
"Did I say make decorative edges on your table tops? I'm not even sure anymore, because I'm starting to lose it." 😂
This t.co/z6o0f8z2H4 , is a very comprehensive woodworking book! It breaks every little thing down, utilizing words, drawings, real pictures, and different diagrams. It`s unbelievably informative and helps me feel like I could help my sibling while we make our furniture together.?
thanks for this video. I am just getting started in woodworking and not sure where/how to sell my products once I can make something worth buying. Do you have suggestions on where/how to get started selling? How did you start and how do you sell your products now. Thx again
I may have missed it, but what about a hand saw? I'm just starting out but I inherited a few things from my dad. One of them is a basic hand saw. Some electric tools (a router, I think), but I have to go through them properly.
Dad's not dead, though. At least, not that I'm aware of. >
Lol “I don’t know what I’m saying anymore because I’m starting to lose it” 😆🍻👍
FACT - here in the UK the most important tool in any workshop is a Kettle 👍
I've stocked up my shop with tools from estate sales and garage sales.
Band saw , bench drill press,planner,joiner
Very useful video. How high are you when you recorded it?
This isn't really "on a budget" that's what i was expecting to watch .. but you di choose the best and handy tool for doing many tasks working on wood .. i got a drill a circular saw i do not have any table saw , router , jigsaw or miter saw... anyway for my hobby woodworking it is pretty good .. i'm considering of buying a jigsaw but i think your shop it is more a professional woodworking shop than a hobby shop .. .thanks again for pointing out many useful tool indeeed :-)
Thanks for this video, really helped me getting started!
Good info man. Killing the videos lately!
Nate Adams thanks buddy! I haven't had much down time in the last two weeks haha. My days have been wake up, go to work, go to school, come home, shoot a video, edit a video, and go to sleep. Repeat.
Nice video with some great tips.
On a budget... That's literally everything in your workshop dude
Great tips Mike! 💪🏻
Probably the first video I've watched that made sure to include ladies lol. All great advice :)
I know this is a pretty old post but, any good recommendations for buying your first bandsaw? Is it worth buying a cheaper $200 model or a waste of time? Any brands or size bandsaws you would recommend for quality, multi-functional and on a budget?
Good vid, thanks. I'm retired and looking for a hobby and woodworking (vs. blacksmithing / in a Condo) looks good to me but unfortunately I'm limited to a small space (half of a two car garage) and to be honest I'm not all that comfortable with powered hand tools (saw especially). I'm trying to find a used (inexpensive) combination machine (5 in 1, preferably more) like a EMCOSTAR (6 to 16 functions). The cheapest combo machine I've seen was a 5 in 1 (brand?) for about $4500, Ouch!
Thank-you for the time.
I had to look those up on google because I've never seen one before. Pretty cool!
Since that comment, based on various videos I've considered that with extra care using hand power tools will be ok (even a saw). ;-)
There's also several videos of ingenious ideas on building a multi-function work table with tools that rotate, flip over, lift up, etc... some from hidden compartments.
if designed correctly (bang for buck, space) this would be my first project. :-)
Ha ha, thumbs up for the demon voice safety glasses advice! 👍
Whoever disliked this video is a tree hugging troll great video the only thing I didn't have is the router
Hand saws and those kinds things are important too
Subscribed!
Do you have a vid on small projects that are good to sell?
great job but i have never liked the irwin clamps or the harbor freight clamps never had good luck with them
Solid tips, thank you!
Hello mate, I have never work with wood before but I want to build an "L" desk, hopefully I am not totally wrong but I fear I may be, my plan is to buy 1"x6"x10', cut 4 pieces of 6"x5' and glue them togheter to get a 24"x5' rectangle, is it that easy?, or even possible if I don't have equipment ( table saw, clamps, etc)? Do you thing I would be able to get a flat top on the desk? Will I need to buy a power tool? I'm sure this is a silly question, please bear with me.
in the UK rulers are wood or plastic steel ones are 'rules'
Apparently every tool is the most "versatile." :)
Colin Fowler hahahaha, apparently
😂😂😂😂😂😂😂😂😂😂😂😂
Beginners need versatile tools..
mmmm... Quarantine has gotten interesting..
Nice info!!
I think thats my sticker in the background
I made the mistake of buying a Ryobi jigsaw. Blades are a serious issue. Apparently, their T-shank mechanism isn't friendly to other brands AND I can't find any Ryobi blades... Insanity. What that has effectively done is turn me away from the brand as I replace my corded tools with cordless in favor of Dewalt, Milwaukee, or Makita. Sometimes cheap is just cheap.
Look for high quality used tools, most of the time you can an excellent quality cast iron top contractors table saw for much less than a cheap job sight saw.
nice video, thanks! how about space? can you really afford spending 1000 or so dollars on rent or is this meant to be for those that have basements in house?
Yogesh Kale i work in a small shed the size of a one-car garage. Renting a space would probably pretty tough to keep up with payments.
There are a few suggestions to think about before you setup your own woodworking business
Will you get support from your spouse?
Are you someone who is self-motivated?
Will you carry out your plan?
Do you have the money to begin?
(I learned these and why they work from Enata wood system site )
Would you recommend corded or cordless saws? I have a outlet close to where i work.
No joke, my jr. High wood shop teacher was missing his index finger. Lol.
I love your shop name
Good advice. Cool video I just subbed you!!
Thank you! Very helpful!
I’m 16 I’ve got no where to do it, my garage is messy. I’m doing it in college tho
Thanks man
Nice video, what would you recommend to a college student with a max of $100 to spend? Is it possible to get into the trade with that little of funding?
Brandon Reddish I think it is definitely possible. Home depot/lowes has circular saw/drill combos for around that price and they usually throw in some other extras, check Craigslist for some used tools such a jigsaw, circular saw, or drill to start on. When i first started I only had a hand saw and a drill from craigslist and it takes some more time and thinking, but i could start making some things. Also, if you are in college, check to see if your school, physics, engineering department has a machine shop that they would let you use. 👍 hope the best for you!
This is great! Thanks for the helpful tips, I never thought to look on Craigslist and I'll be sure to see what there is on campus.
How do you like your Ridgid tablesaw? I found one used online and I'm trying to decide if I should buy it or not.
Collin Cunningham best money i've ever spent!
Thanks bro. Good vid
woodworking on a budget ?
My pocket knife
You forgot to mention paper towels! :D
Would u reccomed ryobi over de walt?