I was looking for a comment about this danger! Hope your finger healed quick. Careful yall - I've seen people use a brick or a long bar pressed forward with the seat adjuster.
This dude is a genius! Only thing not clear is was pushing down right side to rotate the box to pull it out. I figured it out and his tips saved a ton of time. Thank you so much Dad and son. Haha, yes!!!!
Just to be said. If you are doing this to an lx/dx automatic go ahead and pull the filter and change the transmission fluid. Broken down to this point it's exposed. A lot of honda transmissions fail because of the 30k service interval on them is neglected, great post.
There is a third bolt which looks like a screw, but is more like a rivet. There is a rubber grommet which keeps it fixed, and after I destroyed it with tools I was able to pull and twist the filter part out with a great deal of force while somehow also not breaking it. Cleaned the throttle body with a toothbrush duct taped to a chopstick and some rags and it runs great now. Thank you for sharing the video!
my aircon doesn't work, someone suggested a faulty aircon relay ? in order to test it i took out another relay and put in in the slot where the air con relay was, no different aircon still doesn't work . So i put the relay back where i got it. After that i get check engine warning light and having problems with my idle speed . Anyone got some advise ?? Did i messed up the relay by trying it in the aircon slot ??
The only thing is not clear to me is: do you leave your car turn on (part II) while dissabling all the parts and then when you need to clean inside the TBI your boy press the pedal or you just turn on your car righ at the moment you need to clean it???? Doesn´t it damage or blow the car motor??? I heard this might occur but i´m not an mechanic, so what is your view on this????
Makoy Macoy yes and it does not work , if you have problems you need to do a tps reset as the values are way out due to the dirty throttle valve , this can be done with a foxwell nt510 scanner , check my other video on how I did it , car now drives smooth as silk and returns a better mpg .
Hello buddy, Do you have any idea how I could remove the rear plexiglass spoiler on the 8th gen civic ? I can see two bolts each side when you open the boot but undoing them doesn't do much in terms of removal? Cheers
The cjrshop Cheers for the reply buddy. The reason for the question was that the coating had started to peel off. Got chips away to to re lacquer the spoiler clear and the lacquer is again peeling off. Was wondering if there was any way to take this off and have it sprayed. I can send you a picture if you like ? It's not the type r just the box standard perspex spoiler with the third brake light in
+Akhil Varghese yes I too am having this trouble I am going to purchase some black vinyl wrap and just cover the top lip back to the glass screen , no expensive spray job or messy removal .
superlauch25 almost like a lag on the throttle and really bad idle with the a/c on , once cleaned and reset I don’t even realise the a/c is on , previously it was very noticeable.
Hi, Its a great video just want ask 2 question. Did you remove battery terminal at any time during the throttle body cleanup procedure and is it compulsory to reset throttle body position with the computer after this job.
Fatimah Aamir if you unplug any sensors i.e. the maf then operate the key to ignition on and off it will log a fault code , so if you haven't got a code reader you will need to disconnect the battery to clear the fault , as for resetting the tps I needed to as my tb was filthy I've heard mixed opinions on this .but if you don't reset the tps you will find your car revving up etc .
The cjrshop yea i saw that website when it happened i googled it. just looking for your insight. i actually just cleaned it using ur video and going for a test drive now
The cjrshop i cleaned the throttle body, didnt have proper cleaner used fuel injector/carb cleaner got a screwdriver and wrapped a micro fiber around it anf cleaned all in there. then reset my battery to get rid of code. in my test drive now its runninh really good no bogging like i had and the cel js staying off
Hi. I have a problem with the same model of Honda,p2135 voltage correlation A/B. I can pay you 200£ if you fix me the error it doesn't matter is just a connector with 2£. Honda charged me 85£ for diagnose,and they told me it is throttle body,1.000£ to change it. They are i...ts. Every garage i found they wanted to change all throttle or pedal accelerator,without doing a test with multimeter.. if you are interested i can come next week any day and we shake the hands happy after this. Thanks
![Megan Thee Stallion - Otaku Hot Girl [Official Audio]](http://i.ytimg.com/vi/USxIYOaIpig/mqdefault.jpg)
That kid did well, I had a teenager to help me out, he released the pedal when I was cleaning, it clicked my nail so bad it turned purple
I was looking for a comment about this danger! Hope your finger healed quick. Careful yall - I've seen people use a brick or a long bar pressed forward with the seat adjuster.
This dude is a genius! Only thing not clear is was pushing down right side to rotate the box to pull it out. I figured it out and his tips saved a ton of time. Thank you so much Dad and son. Haha, yes!!!!
Just to be said. If you are doing this to an lx/dx automatic go ahead and pull the filter and change the transmission fluid. Broken down to this point it's exposed. A lot of honda transmissions fail because of the 30k service interval on them is neglected, great post.
There is a third bolt which looks like a screw, but is more like a rivet. There is a rubber grommet which keeps it fixed, and after I destroyed it with tools I was able to pull and twist the filter part out with a great deal of force while somehow also not breaking it. Cleaned the throttle body with a toothbrush duct taped to a chopstick and some rags and it runs great now. Thank you for sharing the video!
Hi there, is there a proper way of lifting the rivet?
Brute force. I think it was just stuck on there.
Spray some lube on the grommet and it comes out easy.
Hi great video mate very clear instructions. After doing this do I drive the car as normal or do I have to reset anything?
Lovely boy. Good Mechanical 👍
If you have time, please make a video for valve cleaning at the same Honda Civic please?
Cleaning throttle need to disconnect the negative terminal of the battery sir?
Hi. Can you tell me please what is that white connector at second 38? I am looking to clean it but i can't open that seal. Thank youuuu
Thumbs up! Josh, good job mate
Good boy. Helping daddy
What's that name of the hose that you disconnected at the beginning?
My civic 2009 1.8, rpm hesitate from 2000 to 2500, What might be the reason?
I will appreciate the tip.
Good job , Your son is very cute.
my aircon doesn't work, someone suggested a faulty aircon relay ? in order to test it i took out another relay and put in in the slot where the air con relay was, no different aircon still doesn't work . So i put the relay back where i got it. After that i get check engine warning light and having problems with my idle speed . Anyone got some advise ?? Did i messed up the relay by trying it in the aircon slot ??
Great video my friend i can c that your son is well into it
Thank you , I’m sure he will love cars as much or more as I do .
The only thing is not clear to me is: do you leave your car turn on (part II) while dissabling all the parts and then when you need to clean inside the TBI your boy press the pedal or you just turn on your car righ at the moment you need to clean it???? Doesn´t it damage or blow the car motor??? I heard this might occur but i´m not an mechanic, so what is your view on this????
do you have any video changing the intake manifold?
No sorry sold the car
Why don't you spray directly in throttle body?
Hi m8 why would i need 2 do this?
Do you have to disconnect negative battery cable before beginning any of this?
No
Hi, Did you do the relearn after cleaning your throttle body? cheerss.
Makoy Macoy yes and it does not work , if you have problems you need to do a tps reset as the values are way out due to the dirty throttle valve , this can be done with a foxwell nt510 scanner , check my other video on how I did it , car now drives smooth as silk and returns a better mpg .
ok thanks, I'm planning to clean my TB soon let see what will be the result hoping the relearn will work. i have civic 2010 4dr. cheers!!!
Hi! Could you link this other video? I don't find it. Thanks for the great videos!
Don’t forget to subscribe 👍🏻
ruclips.net/video/z5n3VPejFiY/видео.html
Makoy Macoy i was just about to ask the same question
ZOOMED TOO CLOSE, you'd be guessing which part of the elephant it is.
Is this the same as the 2008 American Honda Civic 1.8?
DabSHOW very similar 👍🏻
Hey good day. question does these 8th gen civics have an Idle Air Control Valve?
+marco rich no the car meters the air via the maf sensor and the tps adjusts to suit , hope this helps .
Hello buddy,
Do you have any idea how I could remove the rear plexiglass spoiler on the 8th gen civic ? I can see two bolts each side when you open the boot but undoing them doesn't do much in terms of removal?
Cheers
Akhil Varghese yes there bonded in place as it acts as the rear glass to, stick a type r spoiler on it job done 👍🏻
The cjrshop
Cheers for the reply buddy.
The reason for the question was that the coating had started to peel off. Got chips away to to re lacquer the spoiler clear and the lacquer is again peeling off. Was wondering if there was any way to take this off and have it sprayed. I can send you a picture if you like ? It's not the type r just the box standard perspex spoiler with the third brake light in
+Akhil Varghese yes I too am having this trouble I am going to purchase some black vinyl wrap and just cover the top lip back to the glass screen , no expensive spray job or messy removal .
One like for joshua.
Mini petrol head
Did you had a running problems?
Ahto Andron no I've been meaning to clean it for a while , Now I know how dirty it gets I will make it a yearly maintenance with the service .
Is it normal for rpm to be at and above 1000 right after cleaning. & engine light came on. Please help!!!
Hey Roomi, did this end up resolving? Or did you have to do a throttle position sensor reset?
Make sure your helper doesn't pull a coolant line and knows which is petrol lol
Why not spray throttle bottle cleaner in it
What symptoms will you have if this is dirty
superlauch25 almost like a lag on the throttle and really bad idle with the a/c on , once cleaned and reset I don’t even realise the a/c is on , previously it was very noticeable.
The cjrshop did you get a smoother acceleration when this is clean?
Yes , but if you do it make sure you have a way of resetting the TPS .
Hi, Its a great video just want ask 2 question. Did you remove battery terminal at any time during the throttle body cleanup procedure and is it compulsory to reset throttle body position with the computer after this job.
Fatimah Aamir if you unplug any sensors i.e. the maf then operate the key to ignition on and off it will log a fault code , so if you haven't got a code reader you will need to disconnect the battery to clear the fault , as for resetting the tps I needed to as my tb was filthy I've heard mixed opinions on this .but if you don't reset the tps you will find your car revving up etc .
i got a p1684 error code on my 06 civic lx. i have power loss bad while driving is this what fixes it?
www.google.co.uk/amp/s/www.autocodes.com/amp/codes/p1684_honda.html
The cjrshop yea i saw that website when it happened i googled it. just looking for your insight. i actually just cleaned it using ur video and going for a test drive now
So what have you cleaned the throttle body ? Or the maf sensor ?
The cjrshop i cleaned the throttle body, didnt have proper cleaner used fuel injector/carb cleaner got a screwdriver and wrapped a micro fiber around it anf cleaned all in there. then reset my battery to get rid of code. in my test drive now its runninh really good no bogging like i had and the cel js staying off
Thumbs to the kid ...how old is he now😅
Hi. I have a problem with the same model of Honda,p2135 voltage correlation A/B. I can pay you 200£ if you fix me the error it doesn't matter is just a connector with 2£. Honda charged me 85£ for diagnose,and they told me it is throttle body,1.000£ to change it. They are i...ts. Every garage i found they wanted to change all throttle or pedal accelerator,without doing a test with multimeter.. if you are interested i can come next week any day and we shake the hands happy after this. Thanks
Hi. You are interested for a check? I live in Northampton..i can come any day this week
Cant u just remove the air filter then spray the cleaner?
No, because all the carbon ale dupreeh gets loose and goes into the engine. You need to wipe it off so that it's clean.
Hey great video. However I did it my check engine light came on after finishing
marco rich did you unplug the the maf sensor on the air box ?
The cjrshop yea unplugged that and plugged. I have since disconnected and reconnected the battery terminal and the light is gone
The cjrshop also how do I reset the idle throttle
marco rich you need to get the throttle position sensor reset check out my other video I did it with the foxwell nt510
Can I have the link to that vid please
You didnt disconnect your battery before unplugging anything electrical
Lol can't see that doing much to the car
A dirty throttle body can cause the car to go into limp mode so cleaning it will eliminate that issue if someone has that issue
Is it just me or anyone else cannot watch the whole video?
Amateur