Thank you. Great as usual. Would you tell please why I can't delete the code on my ML500. When I press delete on the reader, the system just doesn't respond at all. Thanks a lot
Hello I have a 1987 300d turbo diesel and my s.r.s light is on. Once in a while it will go out. My car is too old to have the obd2 plug. Any ideas on where to look. Also I have 2 people telling me I should delete the intake air controle. Saying it will run better. Why would someone delete this box. I have kept everything original except modern cd player and e.g.r block off. Any advice or suggestions would be greatly appreciated. Thank you for your time and video. Robert
i have a 2013 C300 went to get an oil change, car wouldnt start when i was leaving the shop they jumped it. wouldnt start again this morning and i saw the srs alert. what might the problem be and will i have to take it to the dealership or can the shop fix it since it may have been an issue they caused?
May I ask what your cars problem ended up being. my exact same car was serviced for recalled air bags 2 months ago. Can will not start and SRS light warning on. don't know if its because service they just did.
Rachel McNally i took it to the dealership and they said apparently i had some water damage? it was 1900 just for them to see what the problem was not even the repair so i havent had it fixed and it’s been running fine since. engine light still on though
Hi Sir could this cause your vehicle to fail State and Emissions Inspection? I just bought a 2000 Mercedes Benz E 320 Sunday and a mechanic friend is supposed to drop it off at an Inspection Site a couple of doors down from his job after he puts in a few bulbs.
Hello and thanks for Tipton SRS light possible triggers. I just changed the LCD in the dashboard cluster, would that be a trigger for SRS? If so, should I disconnect the battery? Thanks 😊
@@iaingunn8387 its only worth it if your vehicle is not listed in the previous model. If its already there then you get nothing new. You should be able to update the older version as well.
@iRepair Autos I have 2002 cl500, during a rainy and windy day I forgot the moonroof open and in the morning I started the light and the SRS light was on, I tried to use a scanner (icarsoft 2) to read the code and there is no connection to the module. can you help me diagnose this please
Hi i got a srs light on after removing the connectors on the seat I forgot to disconnect the battery.. now my icarsoft won't connect to the srs fault code to clear? Any help would be appreciated
@@Amg641 2004 240c 4 matic oil position sensor where is it located on the vehicle?? Video on changing it. Not finding nothing on it anywhere.?? Appreciate your help. Thank you in advance.
Hey Keith, I got a quick question for you. I have a 2011 E550 and I replaced my steering wheel for the 2015 E550 AMG steering wheel all the buttons functions look to be the same steering wheel is installed but the only problem is my my horn and my buttons are not working for some reason on the new steering wheel. Do you have any idea? What could I be? I’ve been reading on the forms and everyone says I have to switch some kind of board from the old steering wheel to the new steering wheel, any help advice would be greatly appreciated. Thanks my man.
Thanks, this helps. I can't reset my son's 2005 C300 4matics service light. I followed the: Car off ignition on, press phone buttons and OK button, but it doesn't work. Can you help?
Hello my window wipers don't work either. Only once using window spray . And srs on after pulling a plug in the cockpit. Can you help me please 🙏 kind regards tom belguim
Sir I have an issue I want to contact you if you can be of help to me , I have bad both front door actuators (left & right ) how can pull the door assembly on 2006 R350 after taking all the screws 9 holding the door assembly.
I have a ML350 2006 Mercedes that I bought used like maybe I just moved from Sacramento to Nevada and once coming up the last Hill on overpass it acted like the transmission was going to give out so I thought I was going but it didn't and then it kind of like fix back and then it started doing it again so I just did your steps thank you so much man I'm broke I'm homeless enough I'm just blessed to have this car and I appreciate you if maybe later on down the line you could maybe upload that video about the transmission fluid and all that because the Mercedes act like you got to do everything at the dealership and it's $200 to walk in the door so I just thought I was out of a car thank you God bless you and trust and Believe when I'm financially able I will be making a donation
Hi Kieth I have the same car a 2008 Mercedes ml350. My cruise control is not working and I have esp abs rig test message on the dashboard. I was told it could be the brake sensor which is located just below the master cylinder on my particular vehicle. It’s in a very small compartment area and I can’t figure out how to reach it. I was wondering if I could remove the master cylinder to reach it. Do you have a video on that? If so what is the video title? I tried to scroll through but couldn’t find it. Also any thoughts on the matter would be appreciated. As always thanks for your channel. It has been such a huge help.
Good day. Wondering if you might provide some direction. When I purchased my Clk someone changed the front left sb pretensioner. It was replaced with a used one. SRS light is on. Vin codes don’t match. Mercedes says they can not fix this. They can not update the vin code. As it’s vin code locked and they cannot update my vehicle or the pretensioner to align hence getting the light to go off. Mercedes confirms the only reason the light is on is because of the non matching vin and I will need to buy a brand new pretensioner which is vin code blank. And then they can program it to match my vin code. Do you know this to be accurate?
Hello, subbie here asking if you have any tips 4 defective display message? Just started happening a week ago after hard slam on breaks 2 prevent accident. Accident was prevented, no contact. Now I get this message at random. Already making a meet with my mechanic. Would like your thoughts though. My car is a Benz C240 4matic sedan. Thanks in advance 4 any input, from anyone that knows about these Benzeses🤣🤗...
I did a diagnostic on my 2006 clk500 and the stereo screen is saying diagnosis even with my car off and the middle gage is on to how do I turn it off , I don’t wanna drain my battery
i found charging the battery up for two hours started my mercedes vito again - battery had dropped to 6.1 amps lit of night driving gadgets on charge etc... battery has to cope with a lot of drain from all its usages
When Weather gets cold, then it SRS sign and airbag off sign comes If you can please figure out with these symptom, what is the problem please let me know summer timer stays off but Winter time comes up
Thanks so much for the info. I am going to do a diagnostic test this evening and see if the light comes back. I did have an electrical issue with the tracking system fitted to the car and the battery was disconnected for a couple weeks. I also had the front SAM out of the car for repairs, and in the past I have has passenger seat occupancy issues. Any other Ideas?
Hello I have a 2004 slk 320. Have you ever seen a code 20 saying incorrect equipment??? When I connected das sentry it says seat belt buckles or passenger airbag programmed as not fitted when they are fitted
Is clearing the SRS light similar to clearing the Check Engine light in that you have to drive the car for X number of miles to reset the computer? Can this cause the car to fail inspection?
It is not necessary to drive the vehicle for a certain number of miles to reset the SRS light. However, the vehicle may fail an inspection if the SRS light is on. It is important to have any issues with the airbag system repaired as soon as possible to ensure the safety of the vehicle.
@@keithsutton3446 I have seen people cutting or removing the airbag wire so that the system light comes off. Does that remove the airbag function? And if yes, do all the airbags go off?
i brought my CLS 550 in to have it worked on. Oxygen sensor Problems would not clear, and I had the ESP ,ABS inoperative. They replaced the ECU, and then had to replace the ABS pump. Now they say the only light on is the SRS. I don't believe it was on when I brought it to them.
I have a 2002 c240 an have a clicking noise going on an off it last up to 1 minute sometime an sometime it stays clicking even when I shut car of an remove the key it's really annoying 😑 can u please help an my sis light comes on sometime
So do you need to drive the car around a bit so the srs light can come off after u clear the fault code with that tool that u had or will it automatically come off after u clear it with that tool??
Why would the SRS malfunction cause the car to not start? Everywhere I look it's all about how to set so you're not driving around with it on but it literally stranded me at work and wouldn't start. After catching a ride home and driving back in my backup car it magically went away and started fine. This better be a one time quirk cuz shame on mbz for letting a sensor strand you.
@@yahawahsspeckledbird9574 that's strange too cuz mine was completely dry. Drove it to work then 4hrs later at lunch time it wouldn't start. Brief trip home and back and voila it started again. A glitch in the matrix for sure.
Same for me 2010 c300. To get it to start I go in and out of the on position. As if leaving it in the on position let's power run thru it seems in my weird way idk if it makes sense. If this malfunction causes the car to not start, then let's not start the car if seatbelts are not on while we're at it
Hi! I recently tried to help someone with a jump. Apparently I did something wrong. I now have no radio, plate, interior, blinker lights, back up & etc. Any advice? (2010 GLK 350)
2012 ML360 4matic. I get a fault in communication with vehicle ECU when trying to select SRS. I have updated my tool. Ignition is in position 2. Any ideas?
Help! Srs light came on changed rear seat belt. Garage could not reset codes and a different warning came on for air bag (which they recent and it didn't come back on again) Can't get it on the road if I can't turn the light off) CLc 200 diesel 2008/9 any help appreciated
I came to see the SRS light get fixed on a 2000 E430 4matic v8 4.3 - I replaced the control unit as that is what the diagnostic code said to replace - light is still on and needs to get reset - or as I hear, the new control unit needs to be "programmed" with the CPU... is that accurate? I don't want to take it to dealer so I would have to sell my left Nu..I mean Kidney to have it reset.
Is there any way I can check my seat belt sensor on my w211? I was quoted at the shop that it was going to need fixed soon and now the srs light is on so I think it is the seatbelt
Hello sir, thank you for the content. I scanned my E55 and got a code for an open circuit on the passenger seat belt buckle. I replaced that seat belt buckle, and cleared the SRS fault memory. The light on the dash came off for 5 seconds and then re-appeared. I read the new code and now I'm getting "9382 N2/7 (Restraint systems control module): coding is faulty. What next steps should I take? My car was not in an accident or anything, just old. Thanks in advance!
hy mate.you can help me?,i have a amercedes benz a class A170 ,2005 .i was to one mecanic and he read me this errors:,,9025 Component B48(front passenger seat occupied and child seat recognition)is defective and 9242 The resistance value in the ignition circiuit containing component R12/21(Right front side airbag ignition squib )is too high...What i can do to fix this errors,because mecanich tell me is possible to be sensor from chair and is around 300 pounds...what you sugest me to do?
I just looked at mine (MB V2.0) which has a A140 (168.031 gasoline) listed. Seems to be the only "a140" model listed in this device, with another ""a140L" (??) with model code 168.131 I hope this answer your question.
Is there a tool that will reset the SRS warning in a 2019 Sprinter? I unplugged the drivers seat which caused the srs error. Dealership wants 150 to reset. I tried the iCarsoft unit but it won’t read the 2019 Sprinter yet.
SRS system failure Factory inspection 12:22 3.0ZZ times RND country ......that's the message that I'm gettin from my 2009 c200 kompressor what could the issue be
It is coming from one or more of your air bag sensors. You will need to scan the car to see which sensor is at fault and examine, clean electrical contact and possible replace. Did you have any work done on the car recently?
Now I have problem of airbag light on on my Mercedes E350. When I sit in the passenger seat And seat belt latched , it’s gone.. again when I drive alone , I see the light.. any danger if it stays there..?
You saying the low voltage on the battery got me thinking, because I had to change the battery and I put one I had here, and I also have a battery fault code. The batteries are fully charged so I don't know
Mine was triggered, and soon after Mercedes issued a recall for my 2011 C300 for a faulty air bag. The dealer performed the repair , but said they couldn’t clear the SRS light🙃I will try you video solution and get back with you. Thank you.
@@drenatech5740I wasn’t able to to clear the SRA message because I wasn’t sure of which scanner to purchase. The one I saw online said for Porsche. I have a 2011 C300, which one would I buy. Thank you in advance.
@@iRepairAutos I replaced the lower seat cushion for my brother in law and when i reinstalled had the SRS light come on. I was wondering how to turn it off. This answers that question! Thank you!
Hi Keith. I'm a new subscriber and new MB owner. We have been enduring a brain and back aching endeavor trying to locate the audio gateway in our 2009 R320 bluetec. We have removed the driver seat and second row seat as well as the head unit and the aux hub in the glove box, tore into the trunk...nothing! We have also done a deep dive into the web to find the location, but everyone looking for the R320 gateway this is just as befuddled as us. It seems to be a real mystery. Thank You
Appreciate ur video. Yep the srs sensor is way too common in these doggone cars! My issue is that. No accidents and the same day it came on the passenger seatbelt stopped fastening. However, It did happen 1 day after picking it up from getting work done. Of course they are clueless as to why it's on. Never saw this light nor seatbelt issues before. So frustrating because there is absolutely a charge.
Help me Brother.. de condenser fan (ac) and de compresor work together . Soon you start the AC both fan and condenser on together? Cool. Thanks (or someone)
Half of a 5 gallon jug of water spilled in the truck now car won't turn over please help I have a yellow triangle with a "!" In it and a SRS code who can help in Tampa FL
The back seat left side on my r350 Mercedes was remove to replace a fuel pump when the seat was replaced back the srs light came on. Can u help me to fix this problem please.
So I got hit on the driver side with my 05 c240 no air bag deployed. I changed the door and now it says airbag malfunction so the srs light is on, how can I take it off
Thank you! Question 92 500sl srs light intermittently comes on and I turn the steering wheel back and forth real quick and it goes out....could that be the steering wheel lock spring causing the issue?
No offense I’m sure he knows what’s up but this doesn’t do a damn thing for home mechanics didn’t even show where he plugged in 38 pin 16 pin multiplexers or anything helpful epic fail
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
So very happy to have ran across this video. My reader arrived today. My SRS fault is now cleared.
Thank you. Great as usual. Would you tell please why I can't delete the code on my ML500. When I press delete on the reader, the system just doesn't respond at all.
Thanks a lot
Its coming right back because the issue still exists.
Hello I'd like to know if you have a video on replacement of passenger side ballast , thanks
It's 2011 E550
Hello I have a 1987 300d turbo diesel and my s.r.s light is on. Once in a while it will go out. My car is too old to have the obd2 plug. Any ideas on where to look.
Also I have 2 people telling me I should delete the intake air controle. Saying it will run better. Why would someone delete this box.
I have kept everything original except modern cd player and e.g.r block off.
Any advice or suggestions would be greatly appreciated. Thank you for your time and video. Robert
i have a 2013 C300 went to get an oil change, car wouldnt start when i was leaving the shop they jumped it. wouldnt start again this morning and i saw the srs alert. what might the problem be and will i have to take it to the dealership or can the shop fix it since it may have been an issue they caused?
May I ask what your cars problem ended up being. my exact same car was serviced for recalled air bags 2 months ago. Can will not start and SRS light warning on. don't know if its because service they just did.
Rachel McNally i took it to the dealership and they said apparently i had some water damage? it was 1900 just for them to see what the problem was not even the repair so i havent had it fixed and it’s been running fine since. engine light still on though
@@sireemilan thank you
The description of the ICarsoft on Amazon says it doesn't support the W210 chassis. Any idea on that diagnosis?
Possibly, I will check mine later and get back to you
Hey Keith... thanks for this video. On my daughter's 2010 ML350, could the SRS light also be on because of a bad "alternate battery"? Thanks man!
Hi Sir could this cause your vehicle to fail State and Emissions Inspection? I just bought a 2000 Mercedes Benz E 320 Sunday and a mechanic friend is supposed to drop it off at an Inspection Site a couple of doors down from his job after he puts in a few bulbs.
Hello and thanks for Tipton SRS light possible triggers.
I just changed the LCD in the dashboard cluster, would that be a trigger for SRS?
If so, should I disconnect the battery?
Thanks 😊
* tips on
I’m wondering why my steering wheel is hard to use. Is that bc of the wheel speed Sensor?
Is the scanner you are using the icarsoft i980?
yes
@@iRepairAutos I thought so, noticed that the V 3.0 is now replacing it, think it’s worth ordering the latest? Thanks
@@iaingunn8387 its only worth it if your vehicle is not listed in the previous model. If its already there then you get nothing new. You should be able to update the older version as well.
@iRepair Autos I have 2002 cl500, during a rainy and windy day I forgot the moonroof open and in the morning I started the light and the SRS light was on, I tried to use a scanner (icarsoft 2) to read the code and there is no connection to the module. can you help me diagnose this please
Hi i got a srs light on after removing the connectors on the seat I forgot to disconnect the battery.. now my icarsoft won't connect to the srs fault code to clear? Any help would be appreciated
Which icarsoft model do you own? Maybe that model didn’t allow to erase srs lights
@@iRepairAutos icarsoft mb v3
It won't communicate to the srs
Thank you for the quick reply
@@Amg641 2004 240c 4 matic oil position sensor where is it located on the vehicle?? Video on changing it. Not finding nothing on it anywhere.?? Appreciate your help. Thank you in advance.
Hey Keith, I got a quick question for you. I have a 2011 E550 and I replaced my steering wheel for the 2015 E550 AMG steering wheel all the buttons functions look to be the same steering wheel is installed but the only problem is my my horn and my buttons are not working for some reason on the new steering wheel. Do you have any idea? What could I be? I’ve been reading on the forms and everyone says I have to switch some kind of board from the old steering wheel to the new steering wheel, any help advice would be greatly appreciated. Thanks my man.
Cat's good. Practical, insightful repair steps. Helped on a number of issues.
Thanks, this helps.
I can't reset my son's 2005 C300 4matics service light. I followed the: Car off ignition on, press phone buttons and OK button, but it doesn't work. Can you help?
Hello my window wipers don't work either. Only once using window spray . And srs on after pulling a plug in the cockpit. Can you help me please 🙏 kind regards tom belguim
Sir I have an issue I want to contact you if you can be of help to me , I have bad both front door actuators (left & right ) how can pull the door assembly on 2006 R350 after taking all the screws 9 holding the door assembly.
What is the difference between restraint system service and restraint system malfunction
I have a ML350 2006 Mercedes that I bought used like maybe I just moved from Sacramento to Nevada and once coming up the last Hill on overpass it acted like the transmission was going to give out so I thought I was going but it didn't and then it kind of like fix back and then it started doing it again so I just did your steps thank you so much man I'm broke I'm homeless enough I'm just blessed to have this car and I appreciate you if maybe later on down the line you could maybe upload that video about the transmission fluid and all that because the Mercedes act like you got to do everything at the dealership and it's $200 to walk in the door so I just thought I was out of a car thank you God bless you and trust and Believe when I'm financially able I will be making a donation
Hi Kieth I have the same car a 2008 Mercedes ml350. My cruise control is not working and I have esp abs rig test message on the dashboard. I was told it could be the brake sensor which is located just below the master cylinder on my particular vehicle. It’s in a very small compartment area and I can’t figure out how to reach it. I was wondering if I could remove the master cylinder to reach it. Do you have a video on that? If so what is the video title? I tried to scroll through but couldn’t find it. Also any thoughts on the matter would be appreciated. As always thanks for your channel. It has been such a huge help.
Every time I have a problem with my 2011 w212 e class you always have a video pertaining to my problem thanks 👍🏾
Good day. Wondering if you might provide some direction. When I purchased my Clk someone changed the front left sb pretensioner. It was replaced with a used one. SRS light is on. Vin codes don’t match. Mercedes says they can not fix this. They can not update the vin code. As it’s vin code locked and they cannot update my vehicle or the pretensioner to align hence getting the light to go off. Mercedes confirms the only reason the light is on is because of the non matching vin and I will need to buy a brand new pretensioner which is vin code blank. And then they can program it to match my vin code. Do you know this to be accurate?
Hello, subbie here asking if you have any tips 4 defective display message? Just started happening a week ago after hard slam on breaks 2 prevent accident. Accident was prevented, no contact. Now I get this message at random. Already making a meet with my mechanic. Would like your thoughts though. My car is a Benz C240 4matic sedan. Thanks in advance 4 any input, from anyone that knows about these Benzeses🤣🤗...
sir where is your diagnostics procedure? you show us how to use the scanner
I did a diagnostic on my 2006 clk500 and the stereo screen is saying diagnosis even with my car off and the middle gage is on to how do I turn it off , I don’t wanna drain my battery
i found charging the battery up for two hours started my mercedes vito again - battery had dropped to 6.1 amps lit of night driving gadgets on charge etc... battery has to cope with a lot of drain from all its usages
When Weather gets cold, then it SRS sign and airbag off sign comes If you can please figure out with these symptom, what is the problem please let me know summer timer stays off but Winter time comes up
Thanks so much for the info. I am going to do a diagnostic test this evening and see if the light comes back. I did have an electrical issue with the tracking system fitted to the car and the battery was disconnected for a couple weeks. I also had the front SAM out of the car for repairs, and in the past I have has passenger seat occupancy issues. Any other Ideas?
Hey my 2008 ml63 hit a curb and is now srs and wont start, any pointers on where to look
Hi.Thanks for the vid!Is there any chance to get rid of SRS fault after I disconnected the whole sit and then I disconneted battery?
Hello
I have a 2004 slk 320. Have you ever seen a code 20 saying incorrect equipment??? When I connected das sentry it says seat belt buckles or passenger airbag programmed as not fitted when they are fitted
Driver side on a Mercedes S550 window does not go down all of the windows from the driver side work is that particular switch is bad it's a 07
Hi was wondering how to get the kband to turn off in a 2013 63 amg it keeps beeping while I'm driving and is annoying me to death
Will it cause the car to shut down ?
Is clearing the SRS light similar to clearing the Check Engine light in that you have to drive the car for X number of miles to reset the computer? Can this cause the car to fail inspection?
It is not necessary to drive the vehicle for a certain number of miles to reset the SRS light. However, the vehicle may fail an inspection if the SRS light is on. It is important to have any issues with the airbag system repaired as soon as possible to ensure the safety of the vehicle.
@@keithsutton3446 I have seen people cutting or removing the airbag wire so that the system light comes off. Does that remove the airbag function? And if yes, do all the airbags go off?
i brought my CLS 550 in to have it worked on. Oxygen sensor Problems would not clear, and I had the ESP ,ABS inoperative. They replaced the ECU, and then had to replace the ABS pump. Now they say the only light on is the SRS. I don't believe it was on when I brought it to them.
I have a 2002 c240 an have a clicking noise going on an off it last up to 1 minute sometime an sometime it stays clicking even when I shut car of an remove the key it's really annoying 😑 can u please help an my sis light comes on sometime
So do you need to drive the car around a bit so the srs light can come off after u clear the fault code with that tool that u had or will it automatically come off after u clear it with that tool??
And 4 years later it's still helping lol thank Gov
Is an ML350 yr10 145k km worth buying
You are the best. It fixed my problem right away with w220.176.
Why would the SRS malfunction cause the car to not start? Everywhere I look it's all about how to set so you're not driving around with it on but it literally stranded me at work and wouldn't start. After catching a ride home and driving back in my backup car it magically went away and started fine. This better be a one time quirk cuz shame on mbz for letting a sensor strand you.
i have the same problem when mine gets wet srs lights comes on and car will die and will not start for hours i have a 2012 gl450
@@yahawahsspeckledbird9574 that's strange too cuz mine was completely dry. Drove it to work then 4hrs later at lunch time it wouldn't start. Brief trip home and back and voila it started again. A glitch in the matrix for sure.
Same for me 2010 c300. To get it to start I go in and out of the on position. As if leaving it in the on position let's power run thru it seems in my weird way idk if it makes sense. If this malfunction causes the car to not start, then let's not start the car if seatbelts are not on while we're at it
That exactly happened to mine
Before getting a new battery I'd like to know if charging the battery helped anyone. My battery is only 3years old
What tool do you use to unscrew those 4 screws on mercedes w204 srs module?
Hi! I recently tried to help someone with a jump. Apparently I did something wrong. I now have no radio, plate, interior, blinker lights, back up & etc. Any advice? (2010 GLK 350)
I love this video and your straight forward on explaining the Icarsoft i980 . Thanks for the tips
I have a A170 mercedes benz. It goes up to 50km per hour and fail to go beyond at times it goes beyond what can be the problem please help
I try clear it, ot just doesn't clear. My battery went flat and after jump starting it the SRS Light came on
2012 ML360 4matic. I get a fault in communication with vehicle ECU when trying to select SRS. I have updated my tool. Ignition is in position 2. Any ideas?
Help! Srs light came on changed rear seat belt. Garage could not reset codes and a different warning came on for air bag (which they recent and it didn't come back on again) Can't get it on the road if I can't turn the light off) CLc 200 diesel 2008/9 any help appreciated
I came to see the SRS light get fixed on a 2000 E430 4matic v8 4.3 - I replaced the control unit as that is what the diagnostic code said to replace - light is still on and needs to get reset - or as I hear, the new control unit needs to be "programmed" with the CPU... is that accurate? I don't want to take it to dealer so I would have to sell my left Nu..I mean Kidney to have it reset.
Is there any way I can check my seat belt sensor on my w211? I was quoted at the shop that it was going to need fixed soon and now the srs light is on so I think it is the seatbelt
I have a c230 mercedes year 2006 the light not working and the seat and doesn’t start
Hello sir, thank you for the content. I scanned my E55 and got a code for an open circuit on the passenger seat belt buckle. I replaced that seat belt buckle, and cleared the SRS fault memory. The light on the dash came off for 5 seconds and then re-appeared. I read the new code and now I'm getting "9382 N2/7 (Restraint systems control module): coding is faulty. What next steps should I take?
My car was not in an accident or anything, just old. Thanks in advance!
Hi was your issue rectified?
@@drenatech5740it was not. Still driving around with the SRS light on.
I tried replacing the seat belt buckle , that didn’t rectify it.
hy mate.you can help me?,i have a amercedes benz a class A170 ,2005
.i was to one mecanic and he read me this errors:,,9025 Component B48(front passenger seat occupied and child seat recognition)is defective and
9242 The resistance value in the ignition circiuit containing component R12/21(Right front side airbag ignition squib )is too high...What i can do to fix this errors,because mecanich tell me is possible to be sensor from chair and is around 300 pounds...what you sugest me to do?
My scanner reported "Right Front Crash Sensor". Is it behind the bumper?
What's your year and model?
I only adjusted my driver seat right after that i got srs malfunction service needed error and car is not starting,, can u help c300 2012
Are you close to Tucson AZ
No, in Boston
Is icarsoft includes Mercedes a140 model? It seems like it start from 164
I just looked at mine (MB V2.0) which has a A140 (168.031 gasoline) listed.
Seems to be the only "a140" model listed in this device, with another ""a140L" (??) with model code 168.131
I hope this answer your question.
Hey, I have the scanner like that, but the model above it, same brand. I am getting an error when attempting to clear codes. Any ideas? Thanks.
Thank you. I and my Family will follow and support you. Thank you youngman.❤
Yes - often times - with my luck. Those cleaners never work.
Excelente vídeo!
Bem detalista.
Gostaria de saber se este icarsoft atende ao mercedes classe A 160 /190 2003 ( W 168 ) Grato.
Is there away to reset/ turn off the air ride suspension notification , from switching from Air to coilovers?
Yes from the star diagnostics tool and from icarsoft and other scanners that can erase DTC codes.
@@iRepairAutos ok I have icarsoft, what do I look for, thank you
Is there a tool that will reset the SRS warning in a 2019 Sprinter? I unplugged the drivers seat which caused the srs error. Dealership wants 150 to reset. I tried the iCarsoft unit but it won’t read the 2019 Sprinter yet.
Hmmm. Try a software update on that scanner. Instructions to do it is on the icarsoft scanner.
iRepair Autos Thanks for the reply. I did update, emailed iCarsoft and they said they were still working on the 2019 model.
As of Mar 2021. I have a 2020 sprinter with same code. Icarsoft mb2 did not work.
Iyah....di headrest deployed on it’s own.Iman reset them still the alert light is on
Hi there I have code 9103 / R12/13 driver airbag ignition too high ! Any tips ?
which scanner to pic , up to 2016 if the price does not jump for newer 2019.SRS and ABS.
SRS system failure Factory inspection 12:22 3.0ZZ times RND country ......that's the message that I'm gettin from my 2009 c200 kompressor what could the issue be
It is coming from one or more of your air bag sensors. You will need to scan the car to see which sensor is at fault and examine, clean electrical contact and possible replace. Did you have any work done on the car recently?
Now I have problem of airbag light on on my Mercedes E350. When I sit in the passenger seat And seat belt latched , it’s gone.. again when I drive alone , I see the light.. any danger if it stays there..?
My Mercedes is 2014 model
Could not see. The reply.
On My 2010 c300 this light came on in the morning wen I was about to go to work and the car also wouldn’t start could it b the batter?
Can you display the project instead of pointing the camera on yourself? We need to see what your talking about.
You saying the low voltage on the battery got me thinking, because I had to change the battery and I put one I had here, and I also have a battery fault code. The batteries are fully charged so I don't know
If I delete the code, it will come out again?!
I have a 2008 c200 compressor its saying (left air bag malfunction) anyone can help me what could that be?
Mine was triggered, and soon after Mercedes issued a recall for my 2011 C300 for a faulty air bag. The dealer performed the repair , but said they couldn’t clear the SRS light🙃I will try you video solution and get back with you. Thank you.
Hi how did it go?
@@drenatech5740I wasn’t able to to clear the SRA message because I wasn’t sure of which scanner to purchase. The one I saw online said for Porsche. I have a 2011 C300, which one would I buy. Thank you in advance.
This is the one I use for Mercedes
amzn.to/3XVvmfz
I have R350 2006 srs light is on,All the seat belts and 3 airbags was replaced need to reset the SRS light,
My problem came from my wet sam module. Water leak from gasket light! Put some dielectric grease on it and put it back.
Where are you out of
Boston
w212 (e550 coupe) i removed my seat and now i have an srs airbag light
You will have to turn it off with a scanner that can handle this. iCarsoft can handle this.
@@iRepairAutos I replaced the lower seat cushion for my brother in law and when i reinstalled had the SRS light come on. I was wondering how to turn it off. This answers that question! Thank you!
After changing batteries light came on and will not go why
Hi Keith. I'm a new subscriber and new MB owner. We have been enduring a brain and back aching endeavor trying to locate the audio gateway in our 2009 R320 bluetec. We have removed the driver seat and second row seat as well as the head unit and the aux hub in the glove box, tore into the trunk...nothing! We have also done a deep dive into the web to find the location, but everyone looking for the R320 gateway this is just as befuddled as us. It seems to be a real mystery.
Thank You
Appreciate ur video. Yep the srs sensor is way too common in these doggone cars! My issue is that. No accidents and the same day it came on the passenger seatbelt stopped fastening. However, It did happen 1 day after picking it up from getting work done. Of course they are clueless as to why it's on. Never saw this light nor seatbelt issues before. So frustrating because there is absolutely a charge.
Help me Brother.. de condenser fan (ac) and de compresor work together . Soon you start the AC both fan and condenser on together? Cool. Thanks (or someone)
Half of a 5 gallon jug of water spilled in the truck now car won't turn over please help I have a yellow triangle with a "!" In it and a SRS code who can help in Tampa FL
This video seems very helpful! Could my voltage regulator be causing issues with that? I have the red battery light and the srs light!
I'm also having the same problem any ideas? Thanks
The back seat left side on my r350 Mercedes was remove to replace a fuel pump when the seat was replaced back the srs light came on. Can u help me to fix this problem please.
This is easily turned off with the icarsoft scanner. I have a link to this item in the description.
@@iRepairAutos where you located please
Yoo my 2007 c280 srs light on dash also no start no crank heeelp
Hi I have a fault coad of 92c2 drivers window air bag low Circuit r12/17 any ideas
Start by clearing the code to see if it comes back.
So I got hit on the driver side with my 05 c240 no air bag deployed. I changed the door and now it says airbag malfunction so the srs light is on, how can I take it off
Do you have an icarsoft scanner or something equivalent that can erase dtc codes?
I dont have Icarsoft scanner, what's its equivalent and where can I get some to use
Please get one, amazon has them. I can help you once you get it. I980 for mercedes
I just got my icarsoft scanner from Amazon can you show me how I can clear that srs on the dashboard
I'll create a video.
Thanks for the information
Strange, the airbag menu doesnt even show up on mine.
Is there anything that didn't go wrong with that ML 350 lol
no - just about everything that could go wrong did. Well I take that back. The transmission stands strong.
How much u charge to fix a Cadillac 🤷🏾♂️
Sir how do you connect me with mrcedes benz for online coding
Thank you! Question 92 500sl srs light intermittently comes on and I turn the steering wheel back and forth real quick and it goes out....could that be the steering wheel lock spring causing the issue?
Anyone got a solution for the ESL on a w204 c220 cdi. Year 2009. Prefacelift
Hey Keith, you’re Bajan?
Hey! No, Virgin Islands
I just got a née battery put in and now the car say it say
You are the Best
4:30 is when he diagnois with scanner
Thanks. I was just about to pull my eyeballs out.
No offense I’m sure he knows what’s up but this doesn’t do a damn thing for home mechanics didn’t even show where he plugged in 38 pin 16 pin multiplexers or anything helpful epic fail