The tricks and cunning thoughts of the skilled worker at work
HTML-код
- Опубликовано: 5 мар 2024
- Teaching metal turning, teaching general metal turning.
Innovative and new daily methods in the field of metal turning, the method of operating the metal lathe, and identifying all its parts and the laws of metal turning.
The tools used in turning metals and the method of preparing them for work.
Daily positions on a metal lathe
Daily innovations on the metal lathe
Components of teaching metal turning, teaching general metal turning.
Innovative and new daily methods in the field of metal turning, the method of operating the metal lathe, and identifying all its parts and the laws of metal turning.
The tools used in turning metals and the method of preparing them for work.
Daily positions on a metal lathe
Daily innovations on the metal lathe
Components of metal turning workshops
The most important daily repetitive tasks in the field of metals
Can you believe this? You have that much skill that can for example make a bolt and screw the size you like with material you like instead of going to Home Depot trying to find it. What a level of freedom in life. Thank you for showing this dream to even be possible.
Friend of my parents makes scale steam locomotives from scratch on his lathe. He even machined a screw that had fallen out of my mom's glasses. Crazy indeed
Электросварка заземление через подшипники шпинделя?
Я тоже об этом подумал!!))))))))))))
А чего нормально потом немного бить будут😂
Стенка за спиной ,,специалиста" очень близко.Случись что и убежать будет некуда .
I wish I'd known more Men growing up, known mor People with skills like this that I could learn from. As it was, I was raised by a bunch of Women, never had any Male role models and have to self-teach myself just about everything. I'm a good laser engraver/cutter now and am looking to add a CNC router to my toolset soon, then into plasma cutting. Hoping to have a lathe like this at some point as well- one step at a time though!
кто интересно этого умельца к станку подпускает
How's the bearings in the lathe after all that welding ?
Good and butifull idea❤
Мне кажется что при таком варианте обработки лучше было приварить станину к патрону)
Для токаря 1 разряда пойдет, только остальным не подглядывать.
Excelente trabalho
Он даже не знает какой стороной поршень вставляется
Шпиндельный подшипник не очень рад таким действиям
Hahaha!
This is called Thinking out of the Box.
Again a Lathe is called the Mother of All machines, because a Skilled operator can do multiple things with a Lathe.
Thanks.
Good idea
Отрезать гГ образный отросток , проделать все и приварить обратно в разы быстрее имхо
Muy bueno
Local ground clamp or sent thru the lathe? Easy fry method
I hope it's grounded on the part. Poor bearings if not.
Ну и название. Перевод что-ли такой?
Массу на деталь ...
Загадка: Хреновина изогнутая до невозможности?
Ответ (коленвал)
Глушак от москвича😂
Если клиент доволен то почему бы и нет. Пакистанские технологии.
Я один ждал когда это мастера на мотает на эту конструкцию???🤔
Now seriously, that drill is wobbling horribly, just putting and end mill in the drill chuck until you had a flat, then use a center drill and you could have had the hoe on center and not have had to clean up all the weld.
Parece uma suspensão dianteira de vespa.
And that, my friends, is one of the best ways to destroy the bearings in your lathe, if that’s what you’re after!
Esse sim pode dizer sou profissional da area
При фрезеровании подачу делают навстречу вращения фрезы. При попутной подаче фрезу закусит.
No hay fresado...
É SHOW !
Биение не вооружённым взглядом видно
Хитрая наматывалка токаря
🇹🇹🇹🇹🙏🙏❤❤
крура .
Наверняка засрал искрами станок
😂😂😂😂
How horrid, all that welding spatter all over the machine! As a machinist I want to make you sweep chips for the rest of the day and think about what you've done!
See that mill over there, the one noone else is allowed to touch, its 25 years old been run 16 hrs a day and it doesnt have a single mark in the table or ways!!! GO SWEEP!!!
Поршень должен под своим весом падать!
точно нагреется и заклинит нафиг
А он без колец будет работать😂