A lathe technique that not everyone knows!? How to split & drill 3 holes on PCD
HTML-код
- Опубликовано: 22 мар 2024
- This technique of dividing 3 holes with a lathe is a technique that is rarely known, this technique does not require a dividing head and also does not require a rotary table, of course it does not require many tools.
Наука
Bueeens profe mesing, sigue apoyándonos con tus grandes lecciones, desde Perú 😊😊
love the heath and safety, welding with bare feet exposed priceless, but nice work.
Stupenda idea!!!👍 a me spesso occorre montare un mandrino uguale al tuo...Bravo!!!
Using a digital spirit level is an interesting idea. I think a 1:8 reduction gearbox, which larger lathes are usually equipped with, could be conveniently used here. This gear is usually designed so that the gear has a number of teeth divisible by 3 and 4, just so it can be used as a simple dividing device. You simply switch the lever from the intermediate position to the 1:8 position and roughly rotate the chuck by hand. With 1:8 gearing, the motor won't usually turn that easily, and for this purpose it might be enough.
Vamos arriba hermano Messin excelente, un Abrazo para ti y todos los hermanos Indoneses ❤❤
Saya suka teknik nya🤩👍
좋은 영상 감사합니다. 응원합니다!😊😊😊😊😊
Очень красивая работа, когда все получается!
Brilliant Hard working 👍👌
Cool work thanks 👍
The title doesn't describe the project. It appears to be a chuck back plate. If that's a bearing that I saw you install on the press I'm guessing this chuck is going on the tail-stock?
Wakodahatchee Chris
Лайк. Молодцы. Отлично!👍👍👍
We probably don't have the same notion of precision work on a lathe
Arc welding a part on a lathe, may be a technique that you would not do tomorrow in the same shop.
Hi Yanto. Best regards from a german saturday afternoon.
🙋♂️🇩🇪
Hy to brother Frank.. in Indonesia Saturday afternoon to 😁♥️
Absolutely brilliant work ❤️❤️💚💚👍👍🇬🇧🇬🇧
Brilliant???
good job 👍👍
Aguardando o próximo episódio
Amazing ❤
02:25 La masa debe estar lo más próxima a la pieza a soldar SIN QUE MEDIEN ELEMENTOS MECÁNICOS MÓVILES... en este caso, conviene morder la masa en la pieza de mayor diámetro. Saludos!
Bom dia! Muito bom.
I wish I had seen this before I tried making the back plate for my 1942 South Bend 10R! So much math... I didn't have another chuck to hold it in (hence the need for a back plate), but I could have used the digital angle gauge... wow, easy! Too late, I'm done, but I'll remember that for next time!
Thanks brother ♥️
Szép munka mester
I'm sure you're lathe is not happy about all the welding spatter in/around the chuck and on the ways.
Can an anti-spatter spray be used?
@@laszloiszlai yes, please do.
Смотрю тебя, и сам хочу быть токарем. Очень интересная работа
Купи станок и точи на здоровье.
@@fainderskurs-koi8767 уже едет станок
В трехкулачковом патроне было-бы удобнее.
Sangat presisi sekali
Grande monstruo te pasaste
Молодец супер 👍
👍👍👍
Teknik yg sulit untuk ditiru 🤍👍
Жёсткий тип,сварка в шлепанцах,да он посуровее челябинских мужиков будет)
❤
What is the incisor in the video? что за резец на видео ?
👏🏿👏🏿👏🏿😃👍🏿
😁🙏♥️
Used to do that sort of thing in a 3 jaw chuck lot less faffing about.
Halo bang, saya baru kelas 11 smk, jurusan mesin
Saya salut dengan cara kerja abang, sangat baguss
Numpang tanya bang, mini digital level kegunaannya apa ya?
Maksud saya, cara penghitungannya bagaimana?
Niw spawa się w uchwycie tokarki a jak już to robisz to zakryj uchwyt od oprysku stopionego metalu. Jak widzę to pracujesz jakby to była cudza maszyna i robota.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Cutting Oil? What's cutting oil?
PPE LOL
Hey mr big game 😆.
I did more than 20 years ago! It's not new.
Manda um divisor desse pra mim
Buraco matou a técnica sim furos
Voce esta atrezado
There's far easier ways of doing this.
This is going to make me wonder what your making for a week. 🤣
considering it has a chuck and a bearing in it, probably a rotary weld positioner or something. Either that or "high precision chuck backplates" that are on amazon or ebay
@@gorak9000 next vid shows it's a combination chuck and live center.
Creative video, thanks :)
👍
Pamiętaj aby nie puszczać wiórów wstęgowych bo może ci poobcinać palce, rękę lub nawet i kark. Dobry tokarz wie jak pracować aby nie tworzyły mu sie splątane wstążki na nożu bo czasem pęknie Ci nóż.
Máy điện tử tên gọi là gì a
Als ge met platte messen werkt zegt al genoeg.
А как вам удаётся так быстро центровать деталь на четырёх кулачковом патроне?
Да так, стук бряк и готово!
практика. чем больше тем быстрее
how do you centre things with four independendt teeth ?
Jaws, not teeth! Centring a workpiece in a four jaw is a 90 second operation after the first one of a batch, and... a four jaw holds tighter than a three jaw... I've roughed 1.5" off a diameter of a steel billet using a HSS knife and face tool, at low speed, requiring high torque, which I doubt the machine's three jaw could have transmitted... 7.5HP machine...
Anyway, centring in a four jaw... The chuck face has reference grooves in it. They're cleverly arranged so you can compare the independent jaws "corners" to the grooves, interpolate the position of the jaws between grooves. So, you adjust the jaws 1,3, and 2,4 so the workpiece centres roughly, but reasonably well, by eye, then...Either use a DTI to check the workpiece centres on axes 1,3, and 2,4, or... spin the chuck reasonably slowly, and, holding a piece of chalk (blackboard or French) in your hand, approach the workpiece with the chalk, until it touches the periphery of the workpiece. It'll leave a witness mark in one spot if the workpiece is running out a great distance, and you do it right... (with bright stock, you have no excuse for being far out...) Anyway, if the mark's at jaw one, relax the tightening screw at jaw three, add pressure at jaw 1, retighten jaw one, repeat the chalk thing. if you're lucky, the chalk mark will be at both jaw 1 and 3, or if not, there'll be a wider mark on jaw 1 side... Then deal with 2, 4 Continue until approaching the billet with chalk, the periphery is marked continuously... If you're turning cast stock, it may not be round, nor will "black bar" then, it's down to experience and judgement... Once you've centred your first component, when you unload it, loosen jaws 1 and 2, remove finished component, mount next, tighten 1 and 2, you'll not be far out, check, adjust, turn. 90 seconds for a component you can mount by hand. Big stuff, handled by hoist or crane... A but longer...
I was taught not to hold black bar in a three jaw chuck, and never did... But... Not everyone was taught that... In my last job, I ground my three jaw's chuck jaws in situ far more often than I had previously in my entire working life...
"Use the four jaw for turning black bar, you arse!" didn't have the desired effect with fitters...
You can regrind four jaw independent chuck jaws more easily than those from a three jaw self centring chuck... (or a four or six jaw self centring chuck)
I used to leave a four jaw mounted on my "best" lathe at the end of the day, to deter fitters from using it overnight. They thought they could turn... Most, if not all, were wrong...
so with the four tooth ones, you do not have the swirly synchronisation plate on the back? you just individually adjust?@@robertlawson8572
חתיכת עולם שלישי. עובד יחף עם ברנר, 😮
Сынок тебе станок не жалко .после сварки в станке ты выбросил все подшипники в переднеи бабке .очень скоро .
Es lo ke le dije yo pero no entiende ke se dañan los rodamientos o baleros
А еще этот умелец не умеет затачивать резцы, стружка должна закручиваться, а она лентой сползает.
lathe abuse
Воистину купликан!
ediet work 😢
Да геморой это а не метод , не точный не позволяет сделать муфту без люфта . Отверстия для фланца или такого рода соединения . Если нужно точно ставьте энкодер на 3600 имп на оборот .
То ми маємо дивитись поки ти то звариш ???
😁🙏🙏
Свистун
Was soll daran so besonders sein?
Nun, es ging schnell den Winkel zu finden. Hat aber nichts mit Drehtechnik zu tun, allenfalls Messtechnik. Mit einem Zirkel hätte man das ähnlich schnell finden können.
Nice craftman skills but, all of them are a piece of shit. Use a cnc 😂
You don't need a cnc to do good work but a manual mill would have made a much better part.