really looking into getting PPF for my car, dont want to spend 2-4k for a pro when i can get everything i need and more from your kit and site. Are there any reassurances or ways we can minimize our mistakes if we buy your kit? im most worried about the front bumper since thats the hardest
You'll have access to the full step by step course on how to install your kit - courses.tesbros.com/ - plus access to our facebook DIY group where you can reach out to us and other people that have also installed this kit to ask questions and get feedback. If you have any questions before starting or purchasing, reach out to us at support@tesbros.com so we can help you out!
If you put ceramic coat, it will be too late. Ceramic is usually the last step. For color change, as long as you high quality film, it should not change color.
It's a trim tool! And yes it works with all Teslas. We have a trim tool kit specifically for Teslas since they have so many clips everywhere 😅 tesbros.com/products/trim-removal-tool-kit
Just front kits for the 3 and Y for now, but we’re working on the full body kits! They will most likely be Avery Supreme Defense like the front kits though.
To me, they are charging too high for vinyl or ppf installations (roughly 10% of the car cost). Imagine, if you own a house and they are charging you 10% of the house value for painting the house, would you pay them?
Any precut kits available for the front end of a 2018 P100D? I bought your chrome delete kit and would love to DIY some PPF but don’t see it in your website
Thanks for asking, Matthew. After the Model 3 kit comes out June 24, we’ll focus on the Model Y, S & X. Not a clear timeline right now, but we are planning on coming out with that kit too. For now, this is what we offer for Model S: tesbros.com/collections/model-s-accessories
You'll just have to remove the 1 small piece on the fender. We actually recommend that you have that rocker protection too so you're already one step ahead 😄
why moved a knife over the car paint and not between the slots? If you were to pass between the slots, you would have ends left that you could fold inside the slots and thus close the sticker. That way you wouldn't risk a knife on the paint. The chance that the sticker would have come off is much lower. And this also makes the whole business more aesthetic.
If you cut between the slots and fold over, you risk those edges peeling back. If you have enough material to fold over like on the hood, you can fold over and tack down without worry, but when it’s only a little bit like what you would have left over here, it just won’t stay down
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Would you ever attempt to cut PPF out on a car?
Love that you use your own car How can Sophia do anything with those nails Love the show
Thank you! Sophia impressed us too lol
Great explanation on the process. Thank you for the vid!
Glad it was helpful!
I'll def be doing the piece by piece kit. Much faster and smoother process imo.
Best of luck! You got this.
Thanks for the video.
You bet. Thanks for watching!
really looking into getting PPF for my car, dont want to spend 2-4k for a pro when i can get everything i need and more from your kit and site. Are there any reassurances or ways we can minimize our mistakes if we buy your kit? im most worried about the front bumper since thats the hardest
You'll have access to the full step by step course on how to install your kit - courses.tesbros.com/ - plus access to our facebook DIY group where you can reach out to us and other people that have also installed this kit to ask questions and get feedback. If you have any questions before starting or purchasing, reach out to us at support@tesbros.com so we can help you out!
I just fully ceramic coated my Model Y, is it too late to apply PPF the front? Also will the color change over time on a white car?
If you put ceramic coat, it will be too late. Ceramic is usually the last step. For color change, as long as you high quality film, it should not change color.
what does that red plastic piece used to remove the side camera called? does it work with any other teslas? thanks!
It's a trim tool! And yes it works with all Teslas. We have a trim tool kit specifically for Teslas since they have so many clips everywhere 😅 tesbros.com/products/trim-removal-tool-kit
Why dont you sell a complete Tesla ppf kits? I'd love to see one for sale using top of the line Suntek film.
Just front kits for the 3 and Y for now, but we’re working on the full body kits! They will most likely be Avery Supreme Defense like the front kits though.
I am waiting for the Model Y kit.
That's next after the Model 3 kit!
Can you also do pre cut kits for other cars aside from tesla?
At this time, we only make them for Teslas. What car are you looking for?
Will the pre-cut PPF be for the entire car or just the fender?
It’ll be for the front. So bumper, fenders, headlight, fog light, mirror, and full hood with wraparound edges.
@@tesbros are you making it pre cut for the re lst later?
@@willijs8 yep! Absolutely.
To me, they are charging too high for vinyl or ppf installations (roughly 10% of the car cost). Imagine, if you own a house and they are charging you 10% of the house value for painting the house, would you pay them?
Any precut kits available for the front end of a 2018 P100D? I bought your chrome delete kit and would love to DIY some PPF but don’t see it in your website
Thanks for asking, Matthew. After the Model 3 kit comes out June 24, we’ll focus on the Model Y, S & X. Not a clear timeline right now, but we are planning on coming out with that kit too. For now, this is what we offer for Model S: tesbros.com/collections/model-s-accessories
Do you sell whole Model Y pre-cut PPF kits or just PPF kits for certain sections of the Model Y?
We currently don't sell full car kits for the Model Y, but we're working on DIY Front PPF Kit for the Model Y. Should be out in a little bit :)
What’s the size for full body ppf for tesla model 3 ? If u can reply would be great bulk
One full 60 inch wide roll is plenty to do a full Tesla Model 3.
Are you guys planning on coming out with one for the hood and front bumper?
Yes, it’ll be the whole front kit. Includes front bumper, hood, mirrors, fenders, and headlights!
@@tesbros you guys currently have the rocker protection. Will this ppf get in the way of the other one? Specifically where the front meet by the wheel
You'll just have to remove the 1 small piece on the fender. We actually recommend that you have that rocker protection too so you're already one step ahead 😄
why moved a knife over the car paint and not between the slots?
If you were to pass between the slots, you would have ends left that you could fold inside the slots and thus close the sticker.
That way you wouldn't risk a knife on the paint.
The chance that the sticker would have come off is much lower.
And this also makes the whole business more aesthetic.
If you cut between the slots and fold over, you risk those edges peeling back. If you have enough material to fold over like on the hood, you can fold over and tack down without worry, but when it’s only a little bit like what you would have left over here, it just won’t stay down