Thank you so much. My motorcycle is a Yamaha R1 and I was about to pull it apart thinking it was the gear lever internal spring. So glad I saw your video. That’s exactly what the problem was. Thanks again great video. Luke from Merimbula NSW Australia. I’m a happy man 😊
“80% or 90% of the people are having this problem” I said to myself BS! i went out and my shifter was stiff as a board! I lubed it up and it works awesome thank you man appreciate it thought I was gonna need to remove the shifting spring thank god!
This was the problem with my bike FZR 600, just needed some lube at the foot peg / shift lever from being dry. The bike now shifts into gear, great video.
After lubing the ball joints of the quickshifter, my bike shift with way less effort for the foot. It seems like a different bike now. It was very helpful, thanks for sharing this video.
Thanks and I have ktm 200 duke. I have that issue with spring broken. I didn't know what do we call it but your video helped. The service center has mentioned same it cost less and its minor problem. I too got scared
Hey! Just wanted to send a big thanks as your video helped me understand why after I installed rearsets on my Z900, it wouldn't shift into 2nd gear. (it was due to the dot on the shift cylinder thingamabob being misaligned). I had no idea about that dot! You're the best and thanks again for the helpful video.
Shops will charge you an arm and a leg to look at it. And will tell you'll need a new transmission along with an engine overhaul 😂 Thanks for the great explanation!
Freaking lifesaver, the very exact thing changed oil a few weeks back bike was tripping oiled down the spots you spoke of just a few minutes ago and nine is fantastic! Thanks sir
Thank you, helped me find out my 01r6 shifter mount was bent so my shifter rod was rubbing on the chassis where I was almost ready just to send it to yammy..
Hey I'm having problems with that same situation but I don't got a line and a dot to show me where to put it back to I got a 2004 gsxr 1000 and I replaced the gear shifter because the last one broke and I took it off can't put it back in its original place can you help me??😢
@@rossesteban7859 I did it mate, thanks all the same. Since doing it, i've had no problem changing gears at all. The last person to touch it was the yamaha mechanic???
Had a similar problem with 2013 r1, turns out the shift rod was adjusted too high also the slide motion up and down was kind of sluggish so I sprayed it with some wd40. Adjust the clutch cable and the rod mechanism should resolve your problem.
Thank you so much.
My motorcycle is a Yamaha R1 and I was about to pull it apart thinking it was the gear lever internal spring.
So glad I saw your video.
That’s exactly what the problem was.
Thanks again great video.
Luke from Merimbula NSW Australia.
I’m a happy man 😊
you’re the best. just used this for my Yamaha R7. I already ordered a return spring thinking that was the issue and then I came across this 😂
“80% or 90% of the people are having this problem” I said to myself BS! i went out and my shifter was stiff as a board! I lubed it up and it works awesome thank you man appreciate it thought I was gonna need to remove the shifting spring thank god!
This was the problem with my bike FZR 600, just needed some lube at the foot peg / shift lever from being dry. The bike now shifts into gear, great video.
After lubing the ball joints of the quickshifter, my bike shift with way less effort for the foot. It seems like a different bike now.
It was very helpful, thanks for sharing this video.
I had same problemit happened after changing oil
Ur video helped me out fixin it . thanks
Thanks and I have ktm 200 duke. I have that issue with spring broken. I didn't know what do we call it but your video helped. The service center has mentioned same it cost less and its minor problem. I too got scared
Hey! Just wanted to send a big thanks as your video helped me understand why after I installed rearsets on my Z900, it wouldn't shift into 2nd gear. (it was due to the dot on the shift cylinder thingamabob being misaligned). I had no idea about that dot! You're the best and thanks again for the helpful video.
Good video! Hopefully this works laid my bike down a year ago. Was only going between 3 4 5 gears. Now n 1 2. God I hope this is my problem.
Shops will charge you an arm and a leg to look at it. And will tell you'll need a new transmission along with an engine overhaul 😂
Thanks for the great explanation!
Great video you ran over everything and you said what all symptoms are and what they can cause. I hope I can fix my bike. Appreciate it man.
Freaking lifesaver, the very exact thing changed oil a few weeks back bike was tripping oiled down the spots you spoke of just a few minutes ago and nine is fantastic! Thanks sir
Thank you, helped me find out my 01r6 shifter mount was bent so my shifter rod was rubbing on the chassis where I was almost ready just to send it to yammy..
Do i need to take that thingy out to lube it or do i just spray it on there with the cap off?
Hey I'm having problems with that same situation but I don't got a line and a dot to show me where to put it back to I got a 2004 gsxr 1000 and I replaced the gear shifter because the last one broke and I took it off can't put it back in its original place can you help me??😢
Hey bro, how do you get the dot to line up? do i have to take the linkage off from the shaft?
Take the bolt off the shifter rod and pull it out cafully alight it properly with the teeth and tight it back up
@@rossesteban7859 I did it mate, thanks all the same. Since doing it, i've had no problem changing gears at all. The last person to touch it was the yamaha mechanic???
I’m am gonna try to lube everything up , my 08 M109 won’t go up from 2nd . Did a clutch plate change which it needed. Now I’m having this issue.
Thanks it helped a lot!😎
Really appreciate the help!
What kind of lubricant did you use?
I just mused my chain lub
“I like to get to the chase” doesn’t get to the chase first 3 fken minutes repeating the same thing over and over
Then dodnt watch video bud.
Had a similar problem with 2013 r1, turns out the shift rod was adjusted too high also the slide motion up and down was kind of sluggish so I sprayed it with some wd40. Adjust the clutch cable and the rod mechanism should resolve your problem.
Mine won’t go on neutral on a complete stop but when engine is off goes like butter. What could be the problem?
Yeah mine doesn’t return back after shifting, what’s the name of the spring i need?
Restore spring or reset spring
Great video !
Very helpful
My problem is I’m stuck in between 1st and 2nd gear the bike skips past neutral and won’t upshift into 3rd… happened while I was riding
What kind of lube?
You can use the same lolube you use for your chain
My problem is once im in third and begin to slow down, my bike wont shift into second or first unless i make a complete stop? Please help
Try cleaning your ball joints and lubing them see what happens
My r1 wont shift into second but it wil if the engine is not running
Any update on the fix for this issue?
@@mowercameron27 bought a new engine. The gearbox was broken. The shift fork is bend thats why it doesnt shift
Bro get to the point omg
Thanks very informational & helpful good video🤙🏻