I did my own research, because you didn't want to help me, I finally added the 4 MSRs, and the mouse thing is crazy, I found another setting that is much lighter and more fluid than the option you set to set all of them to 0. Thank you for these settings
I don’t help people for simple simple things because we are on the advanced side of tweaking which requires due diligence and trial and error, just like how you were able to solve the problem with no help, helps me create more content that is like this without having to worry about people who don’t pay attention and wants to be spoonfed. Be careful with how you set the values in this, if u don’t set all 0’s then im pretty sure some type of interrupt moderation is still enabled. This setting works well depending on how the system is setup and your hardware.
As soon as i replace the "00C8" Address with all 0's my overclocked controller drops from 8000hz polling rate to 169hz. What could be the issue for this happening and is there an alternative address that will work better for a dualsense ps5 controller?
@@anceltweaks I have an intel i7-11700K @ 3.60GHz and i have two sticks of 8gb ddr4 ram @2400 Mhz, could this just be a low ram issue? Would upgrading my ram to 32 or 16gb do the trick or would i have to upgrade my cpu to an i9 also? what do you mean my system setup is not good? I think my system setup is better than most and i feel like i could fix this with either a small upgrade or fix and any help or advice towards figuring out.
You say use XHCI-IMOD-Interval to make it work automatically, but the RW-Everything program turns off, and you say do not turn off the RW-Everything program. I don't get it and how do I save my settings in the RW-Everything program?
You can export it into a file but sometimes the bar’s change so i recommend just setting up the powershell file for it to work automatically like I shown in the video and leave it.
I am always reluctant to install such programs from the administrator level . Question , why is there 103 entries left in the registry after uninstalling this program ?
@@anceltweaks I checked again , there are indeed entries left in the registry after uninstalling the program , but they are only some links to the "start menu " . Rather nothing dangerous .
@@zygyt12 there are always registry entries left even if you uninstall the program, if you want to remove these reg entries during uninstall then use programs like revo uninstaller to do it
open cmd as admin and paste this command: reg add "HKLM\SYSTEM\CurrentControlSet\Control\CI\Config" /v "VulnerableDriverBlocklistEnable" /t REG_DWORD /d "0" /f
If you did it correctly your mouse should feel different, interrupt moderation is way to try and achieve more efficient throughput at the cost of latency. We disable it in the video for latency, if your system is set up bad and you have a very bad cpu then it’s not worth
Hi ancel hope you are fine, I have 2 issues one I followed your step and the settings are good. But I felt one thing that is when I use the software to set the values manually they work fine but when I run the script I felt that it further reduces the latency and mouse input reduces are well in the game. So my question is that the script is it different in way from the normal process you showed us in the video or does it do the exact thing in RW software. Secondly sometime when I run the script I get a blue screen with message Page_fault_in_nonpage_area why is that any help will be appreciated. Thanks.
@@anceltweaks Brother lots of love and respect thanks for the reply. Can you do me one more favor. I am mainly playing Valorant I noticed that when I do the manual settings via RW-everything it does improve but if I run the script the input is way less is it possible for you to look into it and see if script is doing something additional that we can do manual via RW-everything. I know you must be busy but this is just a suggestion I would not distrube you only that I find a huge difference doing the setting via RW-everything is great but the script does some king of magin and that is noticeable so maybe if you do a little resreach on that and find a way to do the same setting manually maybe that can be even great. Thanks once more stay blessed and keep up the good work.
the rweverything file is blocked by my internet provider and have no other way of accessing by pressing allow or something, is there any way i can get access to this website and why is it so protecting from malware?
@@anceltweaks i had an i5 3570k amd gpu 480 8gb i check that memory integrity and is off but for some reason the program crash the error said "driver cannot be load reistall to fix"
wait am i ban cuz think i enter your discord but then it suddenly gone when i tried to join again it say unable to join and i never said anything in chat or do anything i just join and dowload your tweaks that it
@@anceltweaks Thanks for answer. I just wanted to say, that there should be similar tweak for older pc's with ehci only usb. I would appreciate if You find one and post it on youtube.
@@anceltweaks i was in before i only said like 1 set of messages about scewin you told me send a pic of my control panel i did you fixed my issue i said thanks. amd i never openned the cord after that
I did my own research, because you didn't want to help me, I finally added the 4 MSRs, and the mouse thing is crazy, I found another setting that is much lighter and more fluid than the option you set to set all of them to 0. Thank you for these settings
I don’t help people for simple simple things because we are on the advanced side of tweaking which requires due diligence and trial and error, just like how you were able to solve the problem with no help, helps me create more content that is like this without having to worry about people who don’t pay attention and wants to be spoonfed. Be careful with how you set the values in this, if u don’t set all 0’s then im pretty sure some type of interrupt moderation is still enabled. This setting works well depending on how the system is setup and your hardware.
what is the another settings that you have found
Hi there what did you find care to share with us all.
What are the other settings that you have found?
If you don't find the value 00c8, reboot your PC and repeat everything. This means that you ran the script before setting up Rw everything.
Do an AMD video as well like this one! More networks tweaks for low latency please.
When I open RwEverything it shows an error "driver cannot be loaded, try reinstalling the program"
Disable "Memory Integrity" feature.
Set to zero this key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Config\VulnerableDriverBlocklistEnable
it doesn't help. still receive the same error message
@@stevemckeil7745 Restart PC after Setting it to 0.
@@mertpulucna7831 doesn't work for me I'm on win 11
Doesn't work (on win11 23h2)@@mertpulucna7831
can you do any laptop or amd integrated gpu tweaks, I been trying to fully tweak my mid end pc and I couldn't save the "BIOS version file" .
this pls
Do i need to do it manually before using the automated one? or i can just download the automated and reboot and be good?
Not entirely sure but I would do it manually to be sure
As soon as i replace the "00C8" Address with all 0's my overclocked controller drops from 8000hz polling rate to 169hz. What could be the issue for this happening and is there an alternative address that will work better for a dualsense ps5 controller?
Your system setup and cpu isnt good to handle it
@@anceltweaks I have an intel i7-11700K @ 3.60GHz and i have two sticks of 8gb ddr4 ram @2400 Mhz, could this just be a low ram issue? Would upgrading my ram to 32 or 16gb do the trick or would i have to upgrade my cpu to an i9 also? what do you mean my system setup is not good? I think my system setup is better than most and i feel like i could fix this with either a small upgrade or fix and any help or advice towards figuring out.
You say use XHCI-IMOD-Interval to make it work automatically, but the RW-Everything program turns off, and you say do not turn off the RW-Everything program. I don't get it and how do I save my settings in the RW-Everything program?
You can export it into a file but sometimes the bar’s change so i recommend just setting up the powershell file for it to work automatically like I shown in the video and leave it.
do i need to open the RW software every startup ? or only js the powershell
Either method, powershell doesn’t need to be opened
MSR_DRAM_POWER_LIMIT=0x616
MSR_PP1_POWER_LIMIT=0X640
MSR_PKG_RAPL_POWER_LIMIT=0x610
MSR_PP0_POWER_LIMIT=0x638
618 not 616 blue screen damn you i have format my pc
great video, now we need a AMD one :)
why is my numbers on the PCI of the first part so small, there is only 2 numbers when u have like 10
Watch the video properly before asking any questions, i said to be in either 32 or 16 bit mode
I am always reluctant to install such programs from the administrator level . Question , why is there 103 entries left in the registry after uninstalling this program ?
Can you elaborate on what you’re talking about? This is a tool that has many uses, what it does depends on the user
@@anceltweaks I checked again , there are indeed entries left in the registry after uninstalling the program , but they are only some links to the "start menu " . Rather nothing dangerous .
@@zygyt12 there are always registry entries left even if you uninstall the program, if you want to remove these reg entries during uninstall then use programs like revo uninstaller to do it
i have an error code when i try to open it "driver cannot be loaded, try reinstalling the program" Disabling "Memory Integrity" isn't working.
Search it up online, there are two fixes on a stackoverflow page
open cmd as admin and paste this command:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\CI\Config" /v "VulnerableDriverBlocklistEnable" /t REG_DWORD /d "0" /f
i did this and restarted and it worked, your a goat@@saucyeu
what if i disable xhci usb 3.0? should i use ehci then? anyway doesn't work for ehci need different numbers to type probably
Check it ehci works better for you then xhci, xhci is usually better and it is newer
I replaced all 1s with 0s and my mouse really slowed down. Why?
If you did it correctly your mouse should feel different, interrupt moderation is way to try and achieve more efficient throughput at the cost of latency. We disable it in the video for latency, if your system is set up bad and you have a very bad cpu then it’s not worth
Hi ancel hope you are fine, I have 2 issues one I followed your step and the settings are good. But I felt one thing that is when I use the software to set the values manually they work fine but when I run the script I felt that it further reduces the latency and mouse input reduces are well in the game. So my question is that the script is it different in way from the normal process you showed us in the video or does it do the exact thing in RW software. Secondly sometime when I run the script I get a blue screen with message Page_fault_in_nonpage_area why is that any help will be appreciated. Thanks.
Page fault in nonpaged area can mean many things but usually unstable ram, and no the script and manual way shouldn’t be different
@@anceltweaks Brother lots of love and respect thanks for the reply. Can you do me one more favor. I am mainly playing Valorant I noticed that when I do the manual settings via RW-everything it does improve but if I run the script the input is way less is it possible for you to look into it and see if script is doing something additional that we can do manual via RW-everything. I know you must be busy but this is just a suggestion I would not distrube you only that I find a huge difference doing the setting via RW-everything is great but the script does some king of magin and that is noticeable so maybe if you do a little resreach on that and find a way to do the same setting manually maybe that can be even great. Thanks once more stay blessed and keep up the good work.
@@840443 I'll double check but I highly doubt
the rweverything file is blocked by my internet provider and have no other way of accessing by pressing allow or something, is there any way i can get access to this website and why is it so protecting from malware?
It is not malware, its a tool that was meant for administrative debugging
good video mic volume really low
W easy to follow 👀🤞
Said Driver cannot be load reinstal to fix i try 5 times but still crash
Pc crash or rweverything crash? You have to disable memory integrity, they are three ways of doing it you have to try
@@anceltweaks i had an i5 3570k amd gpu 480 8gb i check that memory integrity and is off but for some reason the program crash the error said "driver cannot be load reistall to fix"
@@anceltweaks hi me again. i fix the install but my pc only had 2.0usb XHCI usb controller, i can use the same config frm the vid?
@@X_B0LTyes
any reason to not automate it? or is there like no cons
Sometimes the BAR’s can change and you can bsod
when i do this i get a ton of frame stutters, is normal?
If you have a very ancient cpu or your OS is cooked, then it will stutter as this takes up more processing
its not downloading fdo rme
My audio sounds bad after applying this. Any clue why?
After disabling xchi interrupt moderation or the experimental?
@@anceltweaks XCHI
Nevermind Bro. I had the wrong address, smh. This Worked like a charm. Thank You!
after i did everything and got the automatic script should i restart or thats it
Thats it, you can restart if you want
Who do I undo the things in the video this shit fucked up my pc
Must’ve done the experimental, and if you watched the video properly, i explain how it works for you to reset it.
Yo um ancel It doesn't download, the rweverything doesn't download
Why
wait am i ban cuz think i enter your discord but then it suddenly gone when i tried to join again it say unable to join and i never said anything in chat or do anything i just join and dowload your tweaks that it
Tweak sellers or alt accounts/new accounts are banned
@@anceltweaks but it my original account and i im not doing both of that
@@justacat7767you must’ve, people don’t get banned for no reason
@@anceltweaks how i just joined? and i didn even chat or do anything
Hi, what about AMD cpu's?
This is an Intel Only guide
mine have letter in the 1 bar 0x3FA0004
Thats okay
i cant join discord i think im banned
can i do this in gaming laptop
You can try
Bro please update your discord link is not working 😊
It does work, alt accounts/new accounts and tweak sellers get banned
how do you revert these tweaks?
Reset cmos, its in the guide if you read it properly
fire
What about EHCI usb?
Might not work
@@anceltweaks Thanks for answer. I just wanted to say, that there should be similar tweak for older pc's with ehci only usb. I would appreciate if You find one and post it on youtube.
i need a new link for the discord it wont let me join
The link works, if you are a tweak seller or joining on a alt/new account, you will get auto banned
@@anceltweaks blud I’m just tryna get tweaks and nah I don’t have a new account or alt I been using ur free tweaks and it helped me a lot
@@fkxaypeople don’t get banned for no reason, must’ve been either or
i cant join the cord
Alt/New accounts get instant banned
@@anceltweaks my account was created in like 2017 tho
@@anceltweaks i was in before i only said like 1 set of messages about scewin you told me send a pic of my control panel i did you fixed my issue i said thanks. amd i never openned the cord after that
this vid is so hard
Yes, we try to show the more advanced things you wouldn’t see from other people
does this work on win11 ?
Yes
Why did you ban me from your discord
Alt accounts or tweak sellers get banned
Im not even on alt account and I didn’t even sell no tweaks I took a picture of a tweak that’s it
U said u banned me for being stupid?😢