Steering Wheel Install with AJT Design Trim Pieces | Toyota Tacoma
HTML-код
- Опубликовано: 12 сен 2024
- Hello and welcome, thanks for stoping by. Today I'm installing a new to me Revesol Steering wheel and a set of AJT trim pieces in Army Green. The new steering wheel appears to be well made and seems to be a stock wheel that had some custom work done to it. It's thicker than the stock wheel with deeper perforations in the leather. More aggressive contours and finished in a squared off fashion with piano black sections. After a week of driving with it, I can confidently say I freaking love it. The AJT trim pieces are also well made and fit like a glove. No real complaints, AJT is a solid company. Install of both the wheel and the trim pieces is super straight forward, just go slow and swap everything over. Make sure the air bag bolts are nice and tight. Do not try to take apart the air bag. Disconnect your battery for at least 20 minutes before removing the air bag. Thanks for watching, don't forget to like and subscribe.
AJT Design -- www.ajtdesign-...
Aftermarket steering wheels for the tacoma are all over the place. If you find one you like at a good price jump all over it. Everything I can find currently is $650 and up.
#revesol
#AJT
#sterringwheelinstall
My shop > www.amazon.com/shop/classytacos
Thanks for watching!
Hit that subscribe button to stay up to date on all my videos!
Classy, you make it look too easy. Nice work. Great tips. Looks awesome!
Thanks, I really appreciate it.
Hi. Is very important not to break off the lock spring when pulling steering out. Make sure all clips are off. Double, triple check. That piece cost $700, if u break it.
For sure, thanks for watching.
Helpful vid. Came out looking great.
Thanks, appreciate it.
@17:11 That's the #1 thing that drives me crazy about my Tacoma! I have been searching everywhere for a how-to video on how to flip the damn thing. You have the know-how, it seems. FLIP IT! And show us how. FLIP IT!!! LOL
Great video btw!
Ha ha, man it's way harder than it looks. Thanks for watching.
It give it a nice touch!! Great video like always.
Thank you.
That steering wheel looks amazing. The only thing i dislike is the shiny black top. Just another thing to reflect in your eyes
After a solid week of driving there is no reflection form the top of the wheel at all. Thanks for watching.
@@ClassyTacos thanks for that info. this definitely helps my purchase decision
@@voodoobluetaco Of course, glad it helped.
jeessh, looks awesome and probably adds some better steering corrections being a bit bigger thicker wheel.
Thanks for watching. I think it adds a little bit of character to the interior. I really like those subtle changes.
Very nice
Thank you.
Looks good - great video
Thank you, appreciate it.
Look forward to your videos. What is the brand name of the steering wheel, it looks great.
Thank you, it's a Revesol wheel as far as I can tell. When I did some searching i could not find any for sale for the Tacoma.
Hello. I'm watching your video because I have an issue with the stock steering wheel trim. My lower left steering wheel trim is not resting tightly on the wheel and it goes up and down when you squeeze it. I noticed when you uninstalled yours, they were just held with screws and no adhesive behind them. Did you have that issue also?
I had no issues when I removed mine. Just 4 screws hood them down. Thanks for watching.
@@ClassyTacos Thanks man!
Soooo, any thoughts on if your cruise control, pre-collision, and vehicle stability error codes pop up after this? I’m assuming I messed up my clock spring. 😅
You sure did, make sure it's plugged in first. One connector for both switch panels on the steering wheel and one connector for the cruise. They should be plugged into the clock spring at the top. Also check under the clock spring centerish bottom connector for the steering angle sensor. Make sure that is plugged in also. Good luck, hope it works out. I do not have any of the pre collision hardware installed on my truck, so that does not apply to me.
🛠whew 😳 Flash backs of 3tpam & front facing camera
ha ha, thank you.
Where can I get that exact same steering wheel? I’ve been looking and haven’t found anything close. Thanks for the video you explained the process perfectly!
Thank you. I can not find the wheel either. I was searching for a while. I ended up finding this one used for sale in the Tacoma Sale section on the TW Forum. I’m not sure they still make these. Thanks for watching.
I think I found it on eBay. “Revesol sports piano black steering wheel.” Looks identical and they also make carbon fiber ones with red stitching and red stripe on top
@@ChipFingers Good catch.
4runner lifestyle sells a steering wheel that looks almost identical to this one. I wonder if it would work for the tacoma 🤔
Maybe. Thanks for watching
Can you lock the steering wheel in place first that way later on when you put it back on, it’ll be in the same position?
Yes, however once you remove the wheel it's up to you to put it back in the same spot. You have to line up the splines on the wheel to the shaft in the column. Thanks for watching.
Thanks for sharing, where do you buy the steering wheel and how much that one cost ??
Thanks for watching, I bought it used off of TW. Sometimes they come up on E-Bay.
Great upgrade…
@@ramireznico Thank you.
Hi. I just bought a 2017 tacoma trd. The air bag assembly is loose. Is it possible to just tighten the screws?
Yes, you should be able to that with no issues. They should not be loose thou, prior accident?
@@ClassyTacos the truck was in a accident. I went to tighten the screws and they seemed to be stripped. I did manage to get it tighter.
@@jasonvandervalk3679 ok, happy you got it sorted out.
@@ClassyTacos thanks.
No future give away? AHAHA
Maybe I'll hav something coming up soon.