I watched this video before going to bed and was able to replace my steering wheel on my 2014 tundra the next day in 35 minutes. GREAT video. Saved me time researching torque and tool requirements. A+
Great guide! I am going to replace my headlight dimmer switch since my headlights go out when using turn signal while its cold. Can i skip a few steps like removing the steering wheel controls and just unscrewing the center nut to remove steering wheel? Is it also impossible if i dont have the pulling tool? I did watch some other vids for other toyota models looks similar, but cant find one for 2014-2021 tundra switch replacement
Thanks for the video 👍 I’m planing to replace my steering wheel, right what I need. I just need a little info, how much torque is applied when putting steering wheel back? Thank you
Hi! In the video, I see that the volume button on the wheel appears to be partially removed already at 4:11, for instance. Can someone please tell me if its possible to simply remove that single button/cover without removing all the internals and airbag?! Thank you so much in advance.
How come it wasn’t straight after your install? Did you just not line it up correctly. Curious as I am about to do this install myself and don’t want to end up with a crooked wheel and have to disassemble and readjust. Thanks!
Hi. You are so skilled doing ALL sort of changes to your Tundra. Do you mind sharing the source where you got the replacement steering wheel? Thank you..
Here is the link. They work great. Should work fine with iPhone 8 as well. www.amazon.com/gp/product/B01DBAVHH0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Man I can’t remove the 2 screw from the side. Someone tighten it too tight. I gave 110 % to remove it with all my strength but it won’t even move a bit🤦♂️🤦♂️ any tips?? Thanks
Georgia Fan Thanks for watching. The old wheel got damaged from the carwash place. The leather wrap on the bottom left got several small cuts. Not sure how they happened.
They are $250 now for my Pro.... going to be the best interior upgrade I've done!....This will complete my interior!!... AJT Designs for the win on interior trim and knobs for anyone interested!!....
NK1794 I think because it don’t have a hand rail to get in the truck the steering wheel is slightly loose I need to take it in and check I like your videos
Yeah. I never liked airbags. They messed up the look of the steering wheel, although the airbags are now smaller than before so they are looking better.
I watched this video before going to bed and was able to replace my steering wheel on my 2014 tundra the next day in 35 minutes. GREAT video. Saved me time researching torque and tool requirements. A+
Awesome! Thanks
Great walkthrough. Really appreciate it. Thanks for sharing.
Is the steering wheel keyed so it lines up correctly?
thanks man! beautiful interior and very helpful video. gave it a thumb up
Great guide! I am going to replace my headlight dimmer switch since my headlights go out when using turn signal while its cold. Can i skip a few steps like removing the steering wheel controls and just unscrewing the center nut to remove steering wheel? Is it also impossible if i dont have the pulling tool? I did watch some other vids for other toyota models looks similar, but cant find one for 2014-2021 tundra switch replacement
Well done video. Thanks for sharing. Perfect step by step.
Thank you for your wonderful comment
Thanks for the video 👍 I’m planing to replace my steering wheel, right what I need.
I just need a little info, how much torque is applied when putting steering wheel back?
Thank you
Hi, The steering wheel is on pretty tight so you will need a puller. You can borrow it for free from Autozone. Good luck.
It's 37 ft/lb
NK1794 Thanks a lot!
YW. Which steering wheel are you getting?
NK1794 I’m swapping my TRD PRO steering wheel with a leather one from a ‘16 Tacoma
Can a steering wheel come off? Mine feels a bit loose up and down and idk if the bolt is loose or not
Hi! In the video, I see that the volume button on the wheel appears to be partially removed already at 4:11, for instance. Can someone please tell me if its possible to simply remove that single button/cover without removing all the internals and airbag?! Thank you so much in advance.
Just wondering if I could find this type of wood steering wheel for my 2021 4runner
Great video! Where did you order the wheel without the trim pieces that house the buttons? Everywhere I look the wheel comes with all the components.
Michael Shannon I got it from the dealership. Thanks for watching.
How come it wasn’t straight after your install? Did you just not line it up correctly. Curious as I am about to do this install myself and don’t want to end up with a crooked wheel and have to disassemble and readjust. Thanks!
Michael Shannon Not sure why, it was either too far to the left or too far to the right so I gave up and adjusted the tie rods instead.
Does it hurt if the battery finger is disconnected for a long time?
How do you know if the new steering wheel lines up correctly?
Great video 👊
Hi. You are so skilled doing ALL sort of changes to your Tundra. Do you mind sharing the source where you got the replacement steering wheel? Thank you..
Bought it from local Toyota dealership. Thx
Where did you buy the phone mounts Below the vents? How do you like them? Will it hold iPhone 8 Plus?
Here is the link. They work great. Should work fine with iPhone 8 as well. www.amazon.com/gp/product/B01DBAVHH0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Thanks for the video!
Dan Martinez Thanks
Great video!
Momentum Tint & Detail Thanks
Outstanding video brother!!!
Thank you!
Man I can’t remove the 2 screw from the side. Someone tighten it too tight. I gave 110 % to remove it with all my strength but it won’t even move a bit🤦♂️🤦♂️ any tips??
Thanks
Damn! Sorry to hear that. So did you get them out eventually?
NK1794 no 🤷♂️
Use a oxy torch, that’s how I did mine
@@whoopigoldberg3047 hi sorry what do you mean? What do I have to do?
Thamks
Why did you replace your wheel? The new wheel looks identical to the stock unit. Excellent instructional video - thank you!
Georgia Fan Thanks for watching. The old wheel got damaged from the carwash place. The leather wrap on the bottom left got several small cuts. Not sure how they happened.
@@NK1794 I would have purchased that from you even with small cuts.
They are $250 now for my Pro.... going to be the best interior upgrade I've done!....This will complete my interior!!... AJT Designs for the win on interior trim and knobs for anyone interested!!....
NIce technique!
Thank you, sir.
@@NK1794You're welcome. where are you located?
I have loosened the two torx all the way but my airbag still won’t come oit
Why was the steering wheel replaced?
The place that washed my truck damaged the leather. Here is a video on it
ruclips.net/video/03AZH0kCiq0/видео.html
Thanks
NK1794 did the company end up paying for a new steering wheel for you?
How much for the new steering wheel?
I think it was around $600
Mine is loose so I have to change out steering wheel
Did that fix the problem? It doesn't sound like steering wheel problem though. You should check the whole steering setup.
NK1794 I think because it don’t have a hand rail to get in the truck the steering wheel is slightly loose I need to take it in and check I like your videos
Thanks for watching. I installed the grab bar on my truck. It's easy. I have a video for it.
I want to change mine to leather but that air bag is nerve racking lol.
Yeah. I never liked airbags. They messed up the look of the steering wheel, although the airbags are now smaller than before so they are looking better.
If you unplug the battery before beginning, you do not have to fear the airbag.
Great video. I feel more comfortable ordering one now.
Great video!
Thank you for watching and for your comment
NK1794 thanks for sharing! Great video!