How To Test And Replace Glow Plugs | Honda Accord 2.2i-CTDi

In this video, we will fix a 7th gen Honda Accord with engine error code P1384 due to this failure the maximum revolutions were limited to 2000rpm (otherwise called limp mode). This check engine light code indicates glow plug circuit malfunction. During the repair, we will show you how to check the heating plugs to see if they are working properly and how to test whether the right current is coming to the plugs. Also we will show you the process of picking out glow plug and proper installation. Most common glow plug failure symptoms are a hard starting engine especially at cold start, engine misfires, rough idle.
This diesel engine (N22A 140HP 103KW) was also found on Hondas like:
Civic (FK3 / FN3) from 2005 and 2012;
Accord (CN1 / CN2) from 2003 and 2008;
FR-V (BE5) 2004 and 2008;
CRV (RD9 / RE6) from 2006 and 2012.
As an Amazon Associate, I earn from qualifying purchases.
Inexpensive quality multimeter: amzn.to/3ikmXQL
Small precise torque wrench: amzn.to/3jLzOvx
Durable rubber gloves: amzn.to/3WE2Yvn
Disclaimer:
We, GK Works are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information provided in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not GK Works.

[@СтаркинВладимир]

Excellent.
Now I know how to do it.
Keep going with videos.

[@qrhcooper]

Great video! Very clear and explanatory

[@QARepair]

Thank you👍❤️

[@thetruth5892]

Do you need to start up the engine when we're testing them?

[@rumogo48]

Hello, I get the error code P1384/$180 AF110, The mechanic tells me that it could be the pressure sensor of the diesel pump or some injector, do you think that by changing the heaters I can solve the problem?
The heaters check well, only some have a negative pogo, but it says they are fine. The car is a Honda civic 2.2. Thanks for your video!!!

[@victortoderica4497]

Hi where's location of PCV valve on that engine.i have honda civic 2.2 diesel

[@BCJAZZZ]

Well... my Honda starts way slower, like 4 turnover of the engine, with stable 900 RPM on idle... that idle speed seems normal for diesel, when comparing it to VW engines... is that normal?

[@HarisCameronRyalls]

Would this be the same on the same engine in a civic?

[@GK_Works]

Most likely yes

[@yoofloriana]

What glow plugs did you use ?

[@GK_Works]

Hello, glow plugs are BOSCH 0 250 503 003