One thing I would say as a Former Honda tech it’s easier if you disconnect and re attach the parking cable while the caliper is bolted to bracket saved me a lot of frustration
Got my brake pads, rotors, calipers replaced in my 2009 Honda Accord. Now the handbrake is extremely loose. Should they have adjusted the handbrake at the time of repair? Thanks
When you are taking off the emergency brake bolt, this can't be done with a ratchet wrench because there is not enough leverage. You have to loosen it while it's still on. Otherwise you will have to put it back on, which is a hassle. It's easier with the air tool. It's also obviously much easier if you have a lift. Also, these calipers look exactly like the new Raybestos calipers I got from Rock Auto.
I love your videos man you’re extremely educational man! Life saver for real! Question, to “bleed the brakes”, can i do the same process you did which you opened the valve til fluid ran out consistently without the air bubbles?
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
One thing I would say as a Former Honda tech it’s easier if you disconnect and re attach the parking cable while the caliper is bolted to bracket saved me a lot of frustration
This is an excellent how to video. Made it really easy to install new brake caliper
Thanks for the clear instructions. This is a big help, doing my honda this weekend.
Thanks so much, just got my rotors and calipers in the mail and installed them today!
This is great since I just did my rear brakes and had some dripping when pushing the piston back. Looks like this is my next project.
No clip for the brake pads? Seems like the brakes I been buying for my 08 honda have a spring like clip I have to install into the holes.
Got my brake pads, rotors, calipers replaced in my 2009 Honda Accord. Now the handbrake is extremely loose. Should they have adjusted the handbrake at the time of repair? Thanks
Is hand brake adjustment not needed?
This is a perfect tutorial 👌
How are these TRQ calipers? Are they good quality? Do they last a long time like OEM calipers?
When you are taking off the emergency brake bolt, this can't be done with a ratchet wrench because there is not enough leverage. You have to loosen it while it's still on. Otherwise you will have to put it back on, which is a hassle. It's easier with the air tool. It's also obviously much easier if you have a lift. Also, these calipers look exactly like the new Raybestos calipers I got from Rock Auto.
When you remove the emergency brake cable from the back of the caliper, is the emergency brake on or off ?
How important are the washers that you reinstalled?
Thanks for the video.
I love your videos man you’re extremely educational man! Life saver for real! Question, to “bleed the brakes”, can i do the same process you did which you opened the valve til fluid ran out consistently without the air bubbles?
Clear and simple !! Thank you
+Ray Ray Thanks for watching our video! 1aau.to/m/Shop-TRQ
no bleeding the breaks?
Bob ross of mechanics
Thank you 1000%
I had to stop this job I couldn't get the e-brake cable off the caliper
Those carrier bolts were far too loose
Spend over 10 minutes explaining a regular brake job. Main question is how to remove the ebrake cable. Not very useful