A useful video, thank you Jose! For those of us who don't speak Spanish, there are subtitles available. I can't help with getting subtitles working on a phone but, if you're using a laptop/computer... 1 - Move your cursor to the bottom left corner of the video window - Various icons will appear. 2 - Click on the 'CC' icon. A red bar will be below the 'CC' and subtitles will start if the video is running. 3 - Click on the cog or wheel icon next to 'CC'. 4 - Click on 'Subtitles' followed by 'auto-translate' so a list of languages pops up. 5 - Scroll down and click on your preferred language. It takes a LOT longer to explain than to do. :D
Thank you. I bought a used Roomba and one wheel was rubbing against the side. I needed to move the wheel over along the pin that goes through it. Your video was very helpful. And the person I bought it from had two cats so both wheels were cleaned. Both packed with hair and fur.
Oh my god, i´m the first to comment. You are the only one on youtube showing exactly how to remove the wheel itself off the base. Good job. It helped a lot. Sad people doesn´t find your video, cause think many have problems with exactly this. And only 114 views. Deserves 1000000 views or more :)
gracias José por un video tan bueno - es muy útil - los sensores de la roomba son muy 'delicados' - todo tiene que funcionar o la roomba completa se apaga - como mostró José, si tiene unos minutos y algo de VALENTÍA, simplemente desmonte y limpie la montaje de la rueda fuera. José, gracias de nuevo!! thanks Jose for such a great video - is very helpful - sensors on roomba are very 'touchy' - everything has to work or entire roomba shuts down - as Jose showed, if you have a few minutes and some BRAVERY, simply disassemble and clean the wheel assembly out. Jose, thanks again!!
The wheel of the Roborock S5 Max looks exactly the same (the part with the gears, the wheel itself etc). I pulled out the gear with force, but your method is much better. Im going to try it once the other wheel is full of hair and needs servicing. Thanks a lot!
excelente video, lo hice tal cual en la llanta derecha, para la izquierda no fue necesario retirar los dos pernos, solo es necesario quitar el perno de la llanta, eso redujo el tiempo en un 40%
Excellent video! I was stuck at the part where you drive the gear axle out. My Roomba drove into my cat's wet food dish and its caked onto the inside of that wheel.
D. José, gracias. Curiosamente la rueda giraba cuando el resorte estaba sin tensión. Cuando se posaba, se trababa. Abrí y... Madre mía lo que había ahí dentro. De nuevo, muchas gracias.
I only use Robot Vaccum cleaner under my king size bed. Rest of the cleaning done with cordless vacuum cleaner. I finished cleaning and mopping my home in 20 mins.
Si se apaga la roomba al minuto de andar puede ser que las ruedas están sucias? No es problema de batería ya que se puede hacer funcionar de nuevo pero nuevamente se apaga a los pocos minutos.
Que herramienta es la que usas para darle golpes con el martillo? no logro sacar ese último perno por mas que le doy de golpes con el martillo al desarmador Phillips, es lo único que me hace falta para llegar a abrir la llanta :(
Hola mi roomba sigue marcando que limpie los cepillos principales, que son los verdes, los rodillos, a pesar que ya le puse unos nuevos sigue marcando ese error, sabes que puede estar sucediendo?
Grazie. Video molto utile. Nel mio caso per togliere e rimettere il perno della ruota ho dovuto usare una morsa da banco, perché con il martello era impossibile.
Parece que la rueda derecha al estar del lado del cepillo debe tragar más suciedad. La izquierda gira bien, que no la he abierto. Lo que funciona no se toca...
Mine will not come apart as easy as yours. Darn it. Cant get the wheel off at the very last step. Tight as can be. It wont budge when i tap it. What I can gather from other videos is that they started making models that you cannot take apart in this way because they want you to just spend the money to replace the wheels instead. What a shame.
@@AdrianClement same thing happened to me. I've put several divots in the metal and probably warped the screwdriver I was using to hammer with. Absolutely would not come out. Luckily getting that far into the wheel let me wiggle out the wire that had gotten twisted around the inner wheel spoke (our Carson tried to eat a cat toy lol). Bummer about the change tho. It would have been nice to clean out the wheel thoroughly while I had it that far apart.
A useful video, thank you Jose!
For those of us who don't speak Spanish, there are subtitles available.
I can't help with getting subtitles working on a phone but, if you're using a laptop/computer...
1 - Move your cursor to the bottom left corner of the video window - Various icons will appear.
2 - Click on the 'CC' icon. A red bar will be below the 'CC' and subtitles will start if the video is running.
3 - Click on the cog or wheel icon next to 'CC'.
4 - Click on 'Subtitles' followed by 'auto-translate' so a list of languages pops up.
5 - Scroll down and click on your preferred language.
It takes a LOT longer to explain than to do. :D
Thank you. I bought a used Roomba and one wheel was rubbing against the side. I needed to move the wheel over along the pin that goes through it. Your video was very helpful. And the person I bought it from had two cats so both wheels were cleaned. Both packed with hair and fur.
Man, you skipped at just the part I needed! The part where you hammer the wheel axis out.
Oh my god, i´m the first to comment. You are the only one on youtube showing exactly how to remove the wheel itself off the base. Good job. It helped a lot. Sad people doesn´t find your video, cause think many have problems with exactly this. And only 114 views. Deserves 1000000 views or more :)
Thank you for watch and please hit the like button
gracias José por un video tan bueno - es muy útil - los sensores de la roomba son muy 'delicados' - todo tiene que funcionar o la roomba completa se apaga - como mostró José, si tiene unos minutos y algo de VALENTÍA, simplemente desmonte y limpie la montaje de la rueda fuera. José, gracias de nuevo!!
thanks Jose for such a great video - is very helpful - sensors on roomba are very 'touchy' - everything has to work or entire roomba shuts down - as Jose showed, if you have a few minutes and some BRAVERY, simply disassemble and clean the wheel assembly out. Jose, thanks again!!
The wheel of the Roborock S5 Max looks exactly the same (the part with the gears, the wheel itself etc). I pulled out the gear with force, but your method is much better. Im going to try it once the other wheel is full of hair and needs servicing. Thanks a lot!
Thank you!! I didn’t know how to get that pinned gear out. Plus I was doing it all with the spring attached. You rock.
excelente video, lo hice tal cual en la llanta derecha, para la izquierda no fue necesario retirar los dos pernos, solo es necesario quitar el perno de la llanta, eso redujo el tiempo en un 40%
GREAT video. Thank you. This was exactly what I needed. Easy to follow and I don’t even speak Spanish.
Thank you for the comment! I’m glad that the video works for you
Muchas gracias!! My robot ate my curly wig 😂 it was completely trapped in both wheels. Was able to save it 🙏🏾
Молодец мужик, подсказал как правильно снять колесо. Весь интернет забит всякой ерундой, а конкретное видео только вот это. Спасибо большое!!!
Добрый день! У вас получилось решить проблему с колесом? Заработало?
Да. Норм@@Антон-ъ6ц3ж
Just the video I was looking for since a long time
Excellent video! I was stuck at the part where you drive the gear axle out. My Roomba drove into my cat's wet food dish and its caked onto the inside of that wheel.
Grazie. Molto preziosa la tua
spiegazione
Sei riuscita a smontare il perno che blocca il coperchietto grigio? Io ho provato ma è molto duro e non voglio rischiare di rompere tutto
Thank you for share this iinformation ❤❤❤❤❤
D. José, gracias. Curiosamente la rueda giraba cuando el resorte estaba sin tensión. Cuando se posaba, se trababa. Abrí y... Madre mía lo que había ahí dentro.
De nuevo, muchas gracias.
GRACIAS INMENSAS! Solucione ese horroroso sonido de las ruedas. 🙏🙏 Mil gracias por compartir tan buena informacion!
I only use Robot Vaccum cleaner under my king size bed. Rest of the cleaning done with cordless vacuum cleaner. I finished cleaning and mopping my home in 20 mins.
Dont understand, when do we use the hammer?
Si se apaga la roomba al minuto de andar puede ser que las ruedas están sucias? No es problema de batería ya que se puede hacer funcionar de nuevo pero nuevamente se apaga a los pocos minutos.
No comprendo que problema habia ,de todas maneras gracias por tu desmontaje
Are you Mexican? i had worked in mexico for two months, i understand all, it's very useful video, thank you very much!
Hello!! Thanks you for watching my video.. I’m from Venezuela but I’m living in US right now!! Saludos! 👋🏻
The "money shot" is at 5:10.
Que herramienta es la que usas para darle golpes con el martillo? no logro sacar ese último perno por mas que le doy de golpes con el martillo al desarmador Phillips, es lo único que me hace falta para llegar a abrir la llanta :(
jose, my roomba keep going in circles and the message is error 10. do you think if i do the steps on the video it could solve the issue?
Definitivamente.. es una rueda mala! Tu puedes hacerlo!! Anímate!
Ho la ruota che gira a vuoto, come fai a fissarla alla vite nel foro? Con un frena filetti oppure vite particolare Grazie
Perfect! Gracias, Jose.
You are super. Thank you so much.
Hola mi roomba sigue marcando que limpie los cepillos principales, que son los verdes, los rodillos, a pesar que ya le puse unos nuevos sigue marcando ese error, sabes que puede estar sucediendo?
Thanks alot :D did you use glue when you assembled it back?
No sir!! You don’t need glue. Everything fits with pressure.. you can usa a tiny hammer 🔨
😃Gracias, esto esta bien.
Grazie. Video molto utile. Nel mio caso per togliere e rimettere il perno della ruota ho dovuto usare una morsa da banco, perché con il martello era impossibile.
mi fa piacere che ti sia stato molto utile!
Gracias me sirvió mucho el video 🎉
Perfect, thank you!
Very useful! Thanks!
Long processes of removing the wheels. You may lost some parts or confused.Faster way use old tooth brush with dettol less then 5 mins
Parece que la rueda derecha al estar del lado del cepillo debe tragar más suciedad. La izquierda gira bien, que no la he abierto. Lo que funciona no se toca...
omg that is so disgusting and helpful! Thank you for the video
Great thank you!
I just cleaned and regreased whole gearbox... Wheel still moves with alot of tension.
That tension it’s normal! I get new ones to compare and the tension it’s the same.
@@josefrank85 yes it was the same tension as before. But i solved it with "furious driving" on my jeans, and it solved the issue.
tu é um anjo!
GRACIAS!!!!!!!
Roomba should pay for Mr Jose Ocampo for him to made this video
Грасиас !
Mine will not come apart as easy as yours. Darn it. Cant get the wheel off at the very last step. Tight as can be. It wont budge when i tap it. What I can gather from other videos is that they started making models that you cannot take apart in this way because they want you to just spend the money to replace the wheels instead. What a shame.
Don’t be scared!! Just hit harder multiple times I promise it will be out! And to put it back in is easier
@@josefrank85 I really very much did that and it just dented the metal and it would not come off.
@@AdrianClement same thing happened to me. I've put several divots in the metal and probably warped the screwdriver I was using to hammer with. Absolutely would not come out. Luckily getting that far into the wheel let me wiggle out the wire that had gotten twisted around the inner wheel spoke (our Carson tried to eat a cat toy lol). Bummer about the change tho. It would have been nice to clean out the wheel thoroughly while I had it that far apart.
I can’t as well.
TENGO UN VACUUM MOP XIAOMI PERO ME MARCA ERRO INTERNO YA LA RESETEEE Y NO QUEDA
pero no entiendo tu comentario este video es un tutorial para limpiar las ruedas de otro modelo de aspiradoras.
Хоть кто-то подсказал, как правильно снять колесо. Спасибо!
Не говорите. Весь тырнет прошерстил и никакой конкретики. В одном видео чудик выбивал колесо вместе с валом с шестерни!!! Жесть
My dog is called Bobo and my robot is called Robobo
You broke older wheel, and bought new for video and did montage 😅. Infamita
Dijo el único anormal que no pudo reparar la rueda siguiendo el paso a paso 😂😂😂 increíble tu nivel de inteligencia 🤣😂🤣😂