Hey... nice work! Love the focus on function! So many of these work bench videos are so purist... when they're finished you're afraid to use the stupid things. Yours is REAL! Love it! Thanks for the video... and the inspiration to build myself one that I will ACTUALLY use.
The alignment dowel is a great idea on the screw! I'm going to think on thar some more. There may be a solution for the dropping of your leg vice screw do to slop. I'll PM you on this. Great journey your on. Steven Columbus Michigan 🇺🇸
Hello! I am trying to find exactly that vise and your video is the only source I have found. It looks great, works great. If you can share more info that can help to build it, it would be great. The link to a pdf no longer works😢, any update? Thaks!!!
really like your work and enthusiasm for the vice and woodworking I myself am quite keen on building a workbench with tail and shoulder vice and found your video perfect for getting an idea how it works. not completely certain tho.. would have loved to see the underside / disassembled as well but anyway thumbs up phil
Phil. Thanks. Here is a link for a great reference guide that I used while building my Tail vise. www.contrib.andrew.cmu.edu/~flip/wood/workbench.pdf I Used this, However, obviously measurement will vary etc. I also made my own screw, in place of the vise hardware he uses. I plan on making a video showing both the screw making and the thread tapping process. I will also try and get a video showing more specifics for the vise and how it works, including dsiassembly and reassembly.
That link no longer works, any chance you still have a copy of the pdf you used for the tail vice? I love your tail vice and am looking to build one for my new bench.
Well that was a very nice job. Unpretentious, very functional, and flexible in use. Just watching some videos for an idea to add to my current bench which is quite unpretentious as well; most of the Vids are very stressful and or involve a lot of metal, and they’re just unnecessarily complicated when all you need to do is make a few square cuts and have a threaded drive in the end. Again good job! I like threaded screws out of metal - no criticism of yours. But I don’t want to have much more metal than that around wood chisels, planes, and saws.
Robert, yes I used a lathe, and a router and there is some tool making required as well. There is an excellent tutorial by Carter Whitling; ruclips.net/video/5C4p8aT7CDs/видео.html I basically followed his tutorial. The screw will work better and last longer if you use hard wood. I used eucalyptus, which is very hard and straight grained.
There's a point in your video where you ask to be excused because its been worked on and not finished, or something close to that? Please don't feel that way, you should take pride in the condition of that tool, its showing its a tool for use and not to be all dolled up. too many people are forgetting what a work bench really is.
the screw retainer was mint! Good job. fancy stuff!
Thank you.
This is a masterpiece. The vice is a dream as it wears many hats. I need to make one but on a mini workbench scale. PERFECTION'!!!
I love the bench. Great repurposing of wood and very impressive wood screw! thanks for sharing.
Thanks so much for sharing. This is genius. Love the pop up dogs.
In fact if you have time could I request a tutorial on how you made the pop up dogs?
You are welcome! Thank you for watching.
I will try to put something together soon. Unfortunately, sometimes there's just not enought hours in the day.
@@nicknlcbuilders3405 hey I totally get that, no problem. Thanks so much for responding.
Wow, that is beautiful. I'm going to build one exactly like that, you are the person who has convinced me. Thanks.
Great, Thank you for watching. Let me know if you want me to make a video showing any particular or specific aspect that make clarify things.
Nice work there. Gave me a few ideas how to sturdy up once I get to work on mine 😊
Thank you.
The beauty of wood and some thought , nice work
Thank you very much!
Hey... nice work! Love the focus on function! So many of these work bench videos are so purist... when they're finished you're afraid to use the stupid things. Yours is REAL! Love it! Thanks for the video... and the inspiration to build myself one that I will ACTUALLY use.
Thank you very much!👍
Thank you for sharing!
My pleasure! Thank you for watching.
The alignment dowel is a great idea on the screw! I'm going to think on thar some more. There may be a solution for the dropping of your leg vice screw do to slop. I'll PM you on this.
Great journey your on.
Steven Columbus Michigan 🇺🇸
I'm going to replace my leg vise screw, as you already know, since you've watched my Leg Vise Wooden Screw - Part 1. Thank you for watching.
I like the small add ons . The washer, the dowel…
Thank you! I tried to think it through. I watched a lot of videos as well, before moving forward.
Hello! I am trying to find exactly that vise and your video is the only source I have found. It looks great, works great. If you can share more info that can help to build it, it would be great. The link to a pdf no longer works😢, any update? Thaks!!!
Nicely Done! RWB
Thank you!
really like your work and enthusiasm for the vice and woodworking
I myself am quite keen on building a workbench with tail and shoulder vice and found your video perfect for getting an idea how it works.
not completely certain tho.. would have loved to see the underside / disassembled as well
but anyway
thumbs up
phil
Phil. Thanks. Here is a link for a great reference guide that I used while building my Tail vise. www.contrib.andrew.cmu.edu/~flip/wood/workbench.pdf
I Used this, However, obviously measurement will vary etc. I also made my own screw, in place of the vise hardware he uses. I plan on making a video showing both the screw making and the thread tapping process. I will also try and get a video showing more specifics for the vise and how it works, including dsiassembly and reassembly.
That link no longer works, any chance you still have a copy of the pdf you used for the tail vice? I love your tail vice and am looking to build one for my new bench.
Well that was a very nice job.
Unpretentious, very functional, and flexible in use.
Just watching some videos for an idea to add to my current bench which is quite unpretentious as well; most of the Vids are very stressful and or involve a lot of metal, and they’re just unnecessarily complicated when all you need to do is make a few square cuts and have a threaded drive in the end. Again good job!
I like threaded screws out of metal - no criticism of yours. But I don’t want to have much more metal than that around wood chisels, planes, and saws.
This vise is the No. 1 Vise.
Top job
Thanks
Beautiful vice (vice) man. Can’t seam to be able to buy a low thread count wood screw here in the UK.
I make them if you are still interested. Pm me if you want.
I eventually got a 2nd hand one. Thanks though.
Thank you. Check out my Leg Vise Wooden Screw - Part 1. I could make that screw and nut type assembly.
Please show the whole workbench in detail in one of the following videos! Thanks so much.
Done.
Great video. What technique and/or tools you use to make the screw? Did you cut the threads on the lathe?
Robert, yes I used a lathe, and a router and there is some tool making required as well. There is an excellent tutorial by Carter Whitling;
ruclips.net/video/5C4p8aT7CDs/видео.html
I basically followed his tutorial. The screw will work better and last longer if you use hard wood. I used eucalyptus, which is very hard and straight grained.
I would add cork on the faces ;)
I used suede, which was convenient, as I had a few pieces. It's also very durable as well. Thank you for watching.
Can I get a couple of Eucalyptus screw from you?
Thank you for watching. Check out my Leg Vise Wooden Screw - Part 1. I could make that screw and nut type assembly.
Cheers mate. Too much music though. Hard at my age to follow…. Nice work!
Fair enough!
There's a point in your video where you ask to be excused because its been worked on and not finished, or something close to that? Please don't feel that way, you should take pride in the condition of that tool, its showing its a tool for use and not to be all dolled up. too many people are forgetting what a work bench really is.
I get that and I appreciate the appreciation! Thank you for watching.