Install Guide for Blackmagic PYXIS Side Plate and Audio Breakout Box
HTML-код
- Опубликовано: 21 ноя 2024
- MID49 Side Plate and Breakout Box convert the Blackmagic PYXIS mini XLR and 3.5mm plug into full-size XLRs with clean cable management.
Breakout Box and Side Plate Bundle For Blackmagic PYXIS
www.mid49.com/...
Side Plate For Blackmagic PYXIS
www.mid49.com/...
Audio Breakout AB-9 for Blackmagic PYXIS
www.mid49.com/...
Love this. Brilliant. This is one of the reasons I went with 6k full frame cine camera instead of the PYXIS. The 6k cine camera has two xlr inputs the PYXIS only has one.
This gives you two but how noisy are they. Since the balanced mono signal is being used to deliver an unbalanced stereo signal I would assume the signal to noise ratio is going to be lower. Has anyone tested this out?
Thanks! The audio inputs are very clean and unless you are running an extremely long cable between the mic and camera, the TRS input is nearly as good as the mini XLR.
Would this work with other side plates? I have the Shape plate but i think there's a gap between the camera and body to tuck the cable and feed it through.
From the photos, it looks like their plate is pretty well flush with the camera edges, so I doubt the cable could pass underneath. The cable diameter is 2.5mm if you want to check.
I might be confused, but how would you route a stereo L/R signal through one 3-pin XLR input?🤔
Never mind. I think I get it now. So you can run an unbalanced stereo signal instead of balanced mono?
@@kunstspielklavier185 That is exactly right!
my question :) why the cable don't have the exact length . no need rund this cable labyrind :)
The cables aren't that much longer than they need to be when laid out straight. Also, some people may skip our Side Plate and put it on a rig in a different spot, so we wanted to allow for that. If you'd like a custom length, we can do that too!
@@mid49films this makes a lot of scenes. thanks for create all this great stuff for us Filmmakers!