A lot of the times when an engine sets for a long time, the cylinders get a little bit a surface rust and what your doing usually works. Keep at it!!! You will get it brother!!!
Do not throw it away. Put 2 ounces of kerosene in each cylinder. Let it sit for 3 or 4 days. Put a socket on the crank bolt and work it back and forth.
Man man man…u got it 🦾…but I understand the stopping when u working it does kill ur groove…but what size bolts did u get to fit ur engine stand..I have one n the box an sure ima need some 😂
@ 😂 ima take that, as well as ask my cousin..but the close up u did im sure I can use that n the store for a better reference as well…so thanks for ur A1 video an camera angles it helps 💯🦾✅
I was just showing the tool...when u under the car and trying to swap out a trans its easier to turn the flexplate to get to the converter bolts instead of going back in forth from the rear of the engine to the front👌🏾
Thanks for watching! Checkout my Amazon Storefront here:
🚨amzn.to/482bz1u🚨
Whatever you decide on the motor, I support you my Brother💪🏾💪🏾💪🏾💪🏾 like you said another learning moment !!! You got This 87
You already know! 🙏🏾
A lot of the times when an engine sets for a long time, the cylinders get a little bit a surface rust and what your doing usually works. Keep at it!!! You will get it brother!!!
Thanks bro!!
Do not throw it away. Put 2 ounces of kerosene in each cylinder. Let it sit for 3 or 4 days. Put a socket on the crank bolt and work it back and forth.
Oh yea that's the other remedy I heard of is kerosene...oh nah I'm not throwing it away
Transmission fluid for the win 🏆
@@kevinwest3689 it's broke free now!!!!
Keep up the good work fam.. love the encouragement and the fact you admit you don’t know it all.
Appreciate the support, gotta stay humble and admit when you mess up, it's a learning experience💯
21:26 that's the tool I needed that time
Yup!! I think I remember telling u about it
There are always learning moments in this game. Keep up the good work brother.
Yessir!!
LETS GOOO MY GUY‼️🔥 5:35
Yea them lift plates come in handy I got the LS n the Carburetor 💯
Yes I need both...I'ma grab me a LS one
2:06 BIG SAVE
Yes indeed
Just a little more work than expected but once you get going it’s going to be a great process. You got it 🫡🫡🫡
Preciate ya Smooth✊🏾
I had this same problem basically did the same thing to free it up
Good to know!! Thanks!!!
Great video my guy‼️🔥🫡💪🏿
Appreciate it bro!👌🏾
23:54 🤦🏾♂️🤦🏾♂️🤦🏾♂️
😡🤬😡
🔥🔥🔥You in Pa? Closer to Philly or Pittsburgh?
VA
@@87SSBOIahhhh ok my bad bro I’m in Pittsburgh I thought you said Pa
Let’s get it 💯💯🫡💪🏽‼️
Man man man…u got it 🦾…but I understand the stopping when u working it does kill ur groove…but what size bolts did u get to fit ur engine stand..I have one n the box an sure ima need some 😂
Dang it man...I think it was M10-1.50
@ 😂 ima take that, as well as ask my cousin..but the close up u did im sure I can use that n the store for a better reference as well…so thanks for ur A1 video an camera angles it helps 💯🦾✅
87 the SAME thing happened with me on my stand bolts!!! Mine were 2 long and 2 shorter tho. Mine is the aluminum block tho.
Man I was pissed🤦🏾♂️😂
@87SSBOI it took me 4 tries lol!!! I had that thing on and off so many times!!! Roflmfao!!!!
@@GrandPitoVic 😂😂😂
Hope everything workout bro 💪🏾💪🏾
We gon figure it out fa sho...thanks
Yessir that marble mystery does wonders 🔥🔥🔥
Yes indeed
Yes sir 💪🏾🤠👍🏾💯
🤠🫡
Take the oil pan off probably spun a few bearings
6:27 IRON BLOCK‼️💪🏿💪🏿💪🏿
See you got some of that Deep Creep, how you like it?
It did great!!! This thing was solid before...I broke 2 ratchets 😂...
💪🏽💪🏽👍🏽
Grind time 💪🏾💪🏾💪🏾
Yessir
Yes, sir.
Work work work
Do you know what they say about LS motors if they’re spinning, they’re winning that motors are gonna be just fine🔥🔥🦾
Man y'all giving me good hope!!! I appreciate it bro👌🏾👌🏾
You. Can replace them but most of us don’t use them after we build the motor
U talking about the knock sensors?
Turn the harmonic balancer with a breaker bar and socket. It's alot easier
Did that..that's how I found out it wouldn't move
I was just showing the tool...when u under the car and trying to swap out a trans its easier to turn the flexplate to get to the converter bolts instead of going back in forth from the rear of the engine to the front👌🏾
Let is soak in marvel mystery oil my boi it may break lose
That's what I did in the video👌🏾...gotta do a second round
Yea u gotta watch again bro
@@84_CuttyI see he did that already now good looking out Brody
@Flysocietybc73 Yessirrrr 💯💯🫡🫡
That’s the wrong ls lift plate playa
I know the LS lift plate...I use the SBC one but this one was made differently...u can use SBC lift plate for LS...do it all the time
@ yeah but you putting all the lift stress on 4 holes and that’s just aluminum heads I’d rather just use the right one 30 bucks Amazon
@ good point...it hooks to the block and the block is Iron
@ always best to be safe but I just be doing stuff 🤷🏾♂️😂😂
It spins it wins
Hey I'm getting there....I just didn't expect that tho...I like that...it's spins it wins ✊🏾
Keep kicking it 🫡💪
🫡
Yooo💪🏾💪🏾💪🏾🫡🫡🫡
Notification Gang 🫡🫡💪🏾💪🏾
Yessir 🫡
Yes replace them
I think I'ma delete em
🔥🔥
Get a knock sensor delete plate off eBay
So y'all ain't running knock sensors?
@ no
It’s go time
🫡🫡
YESSIR 22:28
You take 50 people and there will be 52 ways to do it roflmfao!!!!
Facts 😂😂😂
@87SSBOI 🤣 😂 🤣 😂
🫡🫡🫡
🫡🫡🫡
Ls are junk. Put a real sbc in the car
I ride SBC too🤷🏾♂️...ppl say same thing bout SBC
Nice remedy fam, I did the same thing on the SS 305🫡
Yessir!! Definitely works just have to be patient
Did u end up running the 305 afterwards?
@87SSBOI yessir n it's running great!
@87SSBOI yup. It'll clean it up too if it's got some carbon buildup on the pistons.
@@mexicanlee yessir!! I'm looking forward to this process
YESSIRRRR GREAT VIDEO N INFO MAKE ME FEEL LIKE I CAN BUY ANY MOTOR N FREE IT IF IT WONT SPIN💪🏾💪🏾💪🏾🫡🫡🫡💯💯💯💯
Most of em you can bro👌🏾
@87SSBOI 🫡🫡🫡Fasho
www.ebay.com/itm/355719107300?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5_6xg7qbr-q&sssrc=4429486&ssuid=5X0IjLt4Qim&var=&widget_ver=artemis&media=COPY
Thanks