I'd drop the oil pan and check 1 rod and 1 main cap. If the bearings look good, put them back on. Re-gasket the engine and drop it in. Front and rear cover gasket, valve cover gasket. Intake gasket, and valley cover gasket so no worries about leaks.
SS Boy looking Good! I'm so glad your very Patient with Son year to come your Grandson are Granddaughter will learn some of it. My mom and Dad passed year apart reliving the time enjoy ride in 96 SS. I've been Up and Down also 96 SS thinking about 5.3 are 6.0 looking for a Big Bro of Mine To help. True Magic Dad and Son continue the Bless
Another good video @ I’m sure ur son appreciate u & the build even more just by his patience..for sure can’t rush these projects yall keep it up…I’m here for it 💯🦾
Work! Good look bro. Definitely respect how you grind with the young men you raising! Not enough of that these days! Can't wait to see how the cutty will turn out!
Yessir!! He been working when he can but his schedule crazy…he bussed down the suspension and interior himself and also prepped and painted the frame✊🏾
I would degrease it and change the oil pump and any gasket that you can get to. Then paint it with oil resistant paint. It's a udf with kerosene in Cincinnati. Close to me. Your doing better than ever with the projects.
looking at throttle body the pcv system prolly plugged up so good cleaning inside of valve covers. transmission fluid w a little diesel fuel in it will do the same as marvels and deep creep. marvels is mostly trans fluid if you smell it. i did 5.3 swap on wifes 80z28 and that truck intake wouldnt fit. used a speemaster ls1 style intake and 92 mm throttle body with summit 8718 truck cam. should make that cutty scoot pretty good. i use jy peformance harness and followed rust hoarder garage on repinning it
I would recommend replacing a few parts like oil pan, timing chain and oil pump ….the truck oil pan will hit the bottom front frame…. I have a 5.3 in a cutlass right now
Yea man ima go thru it like I did my last one but idk if ima go further with this one or not…last one I replaced all gaskets and sensors, HV melling oil pump, BTR stage 2 cam, LS7 lifters, machined 799 heads, oil barbell, pickup tube o-ring…for this one I will at the least do all this plus low profile oil pan and shorty S10 headers
@ yea man do that bro that’s basically a rebuild…I’ve few parts myself like oil pan , timing chain and, oil pump, water pump wish I did a cam swap….i can’t wait to see the finish results
Jus droppin ideas: Idk wat kinda power u looking for, but I'm finna LS swap my cutlass too, jus found a 6.0. Idk what u got up your sleeve but personally I'm shooting for 5-600hp daily driver. I plan on goin trickflow 225 heads or LS 799s, stage 3 cam and a ls3 intake or a Fast lsxr intake. That'll Def Crack the 500 barrier I'm shooting for
If it was going into your car stroke it with a cam, but since it’s your son’s car keep it PG13 leave it like it is refreshin it up and let him drive it. 🤷🏽♂️
@87SSBOI 😂😂😂 ok well you can do the old school look on it and put the holly sniper efi on it and vintage valve cover give the engine that old school look or just make it look how you want it to look to your preference
Hello how are you doing , good I hope. How do you do the opening entry, if you don't mine me asking, I want to help grandpito vic page to open with something a similar to that, I'm his wife, if you can give me an idea I will appreciate, thank you, grandma vic
Thank you for coming thru and complimenting the intro!! Love GrandpitoVic!! As for the intro, my brother is a photographer/videographer and I just did what he told me to do lol and this is what it came up as..I have no experience in that field
Oh man!!! Doing this with your son will make memories both of you will cherish!!! That is awesome!!!
@@GrandPitoVic yes indeed!!
15:01 OVER THE EMAIL 2 👀👀🫡🫡💪🏾💪🏾💯💯
Yessuh🫡
I'd drop the oil pan and check 1 rod and 1 main cap. If the bearings look good, put them back on. Re-gasket the engine and drop it in. Front and rear cover gasket, valve cover gasket. Intake gasket, and valley cover gasket so no worries about leaks.
@@GrandPitoVic oh yea... definitely doing that at minimum
@87SSBOI Cool deal!!! I HATE leaks roflmfao!!!
SS Boy looking Good! I'm so glad your very Patient with Son year to come your Grandson are Granddaughter will learn some of it. My mom and Dad passed year apart reliving the time enjoy ride in 96 SS. I've been Up and Down also 96 SS thinking about 5.3 are 6.0 looking for a Big Bro of Mine
To help. True Magic Dad and Son continue the Bless
Appreciate you! 96 SS one of my favorites
Another good video @ I’m sure ur son appreciate u & the build even more just by his patience..for sure can’t rush these projects yall keep it up…I’m here for it 💯🦾
You already know 🙌🏾✊🏾
11:45 family comes first 🫡💯
FIRST!!!!! ✊🏾✊🏾✊🏾
Work! Good look bro. Definitely respect how you grind with the young men you raising! Not enough of that these days! Can't wait to see how the cutty will turn out!
Appreciate you! 🙌🏾 Doing my Best!
6:50 u know I'm wit dropping it like that😂😂
😂😂😂
Way to get after it fam!!!🫡🫡🫡🫡🫡🫡 EXCELLENT WORK‼️‼️‼️🏁🏁🏁🏁🏁
Appreciate ya OG!! Hope ya Bday went well bro! Cheers to another year✊🏾
@@87SSBOI 🙏🏾‼️🙏🏾‼️🙏🏾‼️‼️‼️
Yes, sir, that thing ain’t ready to fire up
🦾🦾
That’s real and that’s respect 💪🏽 gotta let him get his hands dirty on it he’ll have that car forever!
Facts 💯💯💯
YES SIRRRRRRR!!!! I TOLD YOU!!!! YOU WERE DOING RIGHT!!! HELL YEA!!!! YES SIR!!! I'm happy for you 87!!!!!
Thanks!!! I appreciate the good vibes🫡
@87SSBOI 👍
1:42 you can get it from tractor supply but no need now
Word!!! I didn't think about that...good to know
Is definitely a good idea to get him involved he can learn early and like you said he’ll appreciate it more💯💯💯
Yessir!! He been working when he can but his schedule crazy…he bussed down the suspension and interior himself and also prepped and painted the frame✊🏾
Check out his channel bro CARFILMZ youtube.com/@carfilmz?si=SzCaGLsugT6YpE_R
@ subscribing to it now
@ thanks bro…he should be back active soon…🤞🏾
Get those heads off to see what those cylinders look like 💪🏽💪🏽👍🏽👍🏽
Yessir
I would degrease it and change the oil pump and any gasket that you can get to. Then paint it with oil resistant paint. It's a udf with kerosene in Cincinnati. Close to me. Your doing better than ever with the projects.
Preciate ya👌🏾
Merry Christmas 87!!!!
Merry Christmas 🎁🎄
Yes sir 💪🏿🤠👍🏿💯 let's go family
🤠🫡
I would send it to the machine shop and do a engine makeover and have all of the pistons checked out and install a cam in it
Sound good 🫡
looking at throttle body the pcv system prolly plugged up so good cleaning inside of valve covers. transmission fluid w a little diesel fuel in it will do the same as marvels and deep creep. marvels is mostly trans fluid if you smell it. i did 5.3 swap on wifes 80z28 and that truck intake wouldnt fit. used a speemaster ls1 style intake and 92 mm throttle body with summit 8718 truck cam. should make that cutty scoot pretty good. i use jy peformance harness and followed rust hoarder garage on repinning it
Appreciate the advice 👌🏾...great info
YESSIR 10K ON THA WAY‼️🫡💪🏿
You already know🙌🏾✊🏾
Big dog tulu what it do
You should try running the engine on the stand first before throwing it in the car. Looks good cool you got it free without much damage
It's coming apart so I will see everything..thanks for watching and interacting with the channel 🫡
Dope content 💪🏽
Appreciate ya🫡
Take ya time bro we locked in
Yessir!! Tryna get like u wit these swaps🫡
Great job
👌🏾👌🏾
Yessir I 👀 you bro
I would recommend replacing a few parts like oil pan, timing chain and oil pump ….the truck oil pan will hit the bottom front frame…. I have a 5.3 in a cutlass right now
Yea man ima go thru it like I did my last one but idk if ima go further with this one or not…last one I replaced all gaskets and sensors, HV melling oil pump, BTR stage 2 cam, LS7 lifters, machined 799 heads, oil barbell, pickup tube o-ring…for this one I will at the least do all this plus low profile oil pan and shorty S10 headers
@ yea man do that bro that’s basically a rebuild…I’ve few parts myself like oil pan , timing chain and, oil pump, water pump wish I did a cam swap….i can’t wait to see the finish results
Oh yea cam is a MUST!!!!
Appreciate you tapping in 🫡
@@87SSBOI no problem brother 💪🏽
9:34 Facts Family 1st
They sell Kerosene in Walmart in cans.
I looked and None of my Walmarts had it..also checked Home Depot and Lowes...they all were out🥹
@87SSBOI OH wow!!! Too far south I guess.
YOOOO
Yurrrr 🫡🫡🫡
Ls swap the world boi, this damn good footage 🤟🏿🤟🏿🤟🏿
Precite ya J!! Had to get Country on em one time 🫡
It's already in ya, you might as well gone let them see it 😂🤟🏿🤟🏿🤟🏿
@@jerrymccotry3393 😂😂
Jus droppin ideas:
Idk wat kinda power u looking for, but I'm finna LS swap my cutlass too, jus found a 6.0. Idk what u got up your sleeve but personally I'm shooting for 5-600hp daily driver. I plan on goin trickflow 225 heads or LS 799s, stage 3 cam and a ls3 intake or a Fast lsxr intake. That'll Def Crack the 500 barrier I'm shooting for
Nice!!!...I'm not looking for all that...just something slight and reliable...it's going in a 1987 cutlass for a 16 year old
1:42 gohead and get it honed and get Swatbed str8‼️🫡💪🏿
If it was going into your car stroke it with a cam, but since it’s your son’s car keep it PG13 leave it like it is refreshin it up and let him drive it. 🤷🏽♂️
Sounds like a great idea👌🏾
I would car intake on and I would do knock sensors delete. And shot tube headers and stage 2 cam
👌🏾👌🏾👌🏾
🫡🫡🫡
🫡🫡🫡
9:34 🫡🫡CarFilmz
We bout to LS the Cutlass 💯🫡🫡
Yessuh!!
💪🏾 💪🏾 💪🏾 💪🏾 💪🏾
🫡
They sell kerosene in West Memphis AR we used to burn those heaters back in 2002ish
Yea I remember u could go get it anytime…now can’t find it…I’m good now tho👌🏾
You did that bro congrats are you going to take the heads off
You damn right!! Buss down coming soon
@ already can’t wait for content thinking about buying a motor to bus down and build to my liking
Richard Holdener have cams for 200 on his website to make 5.3 make 420 plus horsepower.
Gonna check it out 💯
Do LS carburetor with vintage valve covers that hide the coil packs
Oh nah I know for sure I'm not going carb..thats what I'm tryna get away from 😂😂😂
@87SSBOI 😂😂😂 ok well you can do the old school look on it and put the holly sniper efi on it and vintage valve cover give the engine that old school look or just make it look how you want it to look to your preference
@ yea we Gon do something wit it🤞🏾👌🏾
@@87SSBOI 💪🏾💪🏾💪🏾😎
I hope you are going to at least pull the heads to inspect the condition of the cylinder walls before dropping it in.
Definitely am
Get a set of stock LS1 pistons and make it an iron block LS1
Good shit ✊🏾bro I’m struggling getting off the top bolt on the tranny. You got any tips for me?
Just gotta get in there wit an offset wrench best I can tell ya
Hell yeah family I knew you would come thru. Not a mechanic my ass😂 good looking out
@ 😂😂😂...I just got called a rookie about an hour ago...I'm.just a rookie outchea Mayne 😂😂😂
Hello how are you doing , good I hope. How do you do the opening entry, if you don't mine me asking, I want to help grandpito vic page to open with something a similar to that, I'm his wife, if you can give me an idea I will appreciate, thank you, grandma vic
Thank you for coming thru and complimenting the intro!! Love GrandpitoVic!! As for the intro, my brother is a photographer/videographer and I just did what he told me to do lol and this is what it came up as..I have no experience in that field
What are you putting in the c10
The other 5.3 on the stand
Get you a set of 243 heads as will
Did you get that 5.3 cheaper because it was locked up ??
It was running when she wrecked it..they didn't know it was locked up...I didn't pay for it
START IT ON THE STAND
Nah she gon be good, she getting ran thru 😂
Id remove all truck psrts. Make it look likd its a car ls motor, seeing that its going in a car.
Facts💯
Walmart for lamps
Yea I went there...app said they had some but they didn't😢
Yea ..Sell it to me!
👀👀👀