Question about your setup. If you are running IR or IR/ilum mode on your LS321g, will your white light activate? If so that sucks, I’m going to be running a cloud light with an axon sync switch and worried if I run IR it’s gonna turn on my white light.
@@Typicalpnwguy do you have some light issues as far as flickering/dimming if the unity switch plug is tapped or twisted in different directions while plugged into the Surefire DS00?
@@Typicalpnwguy i have a cloud defensive rein 3.0 head, legacy body, surefire DS00 tail cap and a unity axon standard switch setup. Got the switch replaced which took away abrupt flickering and loss or power. However; if i tap the tail cap/switch plug area, it’ll dim or flicker a little still.
@@Typicalpnwguy what seemed to fix the flickering is keeping the actual unity plug from moving/spinning inside of the tailcap. I used the UE switch I just got and used electrical tape around it to keep the connection tight. No more flickering even when tapping the tail cap/switch plug.
Question about your setup. If you are running IR or IR/ilum mode on your LS321g, will your white light activate? If so that sucks, I’m going to be running a cloud light with an axon sync switch and worried if I run IR it’s gonna turn on my white light.
@@swarbrickjesse yes and why I bought a 100 Concepts Light cap
How did you get the crane plug to fit into the holosun? Thanks for any response and info.
You can push the metal triangle piece on the plug down slightly with a flat head screw driver or you can just shove it in like I did 😆
@@Typicalpnwguy do you have some light issues as far as flickering/dimming if the unity switch plug is tapped or twisted in different directions while plugged into the Surefire DS00?
@@callsignyoda I don't ..........atleast yet 🤔. Are you?
@@Typicalpnwguy i have a cloud defensive rein 3.0 head, legacy body, surefire DS00 tail cap and a unity axon standard switch setup. Got the switch replaced which took away abrupt flickering and loss or power. However; if i tap the tail cap/switch plug area, it’ll dim or flicker a little still.
@@Typicalpnwguy what seemed to fix the flickering is keeping the actual unity plug from moving/spinning inside of the tailcap. I used the UE switch I just got and used electrical tape around it to keep the connection tight. No more flickering even when tapping the tail cap/switch plug.
Can you get one where the flat is the light and the other the laser?🧠🤯🔫
Not sure what you're asking
what is the wrap on your rail?
It's from Burnproof Gear