Thank you all for the encouraging words and taking the time to watch this video, you have all helped my channel grow and I appreciate you all more than you know😀 Please consider subscribing and becoming a member so we can keep achieving success😎😎😎Lots of good stuff coming soon, next couple of months it’s been a long year, Thank you again my friends love you all
So thankful for this video! Single mom here, in nursing school with a tight budget. My dryer quit working and I thought I was going to have to replace it. Thankfully I found your video and it made it so much easier (and cheaper lol)!! Appreciate you taking time to teach others!
Thank you thank you, i just finished 30 mins ago fixing my dryer with your step by step instructions, great job with the video content, thanks once again. It's working again, i saved money 💰. I feel like a technician now 😂. Thank you.
Thank you for this video. I never even took apart a dryer and today you helped me replace the belt and showed me where the tension wheel goes and how to run the belt through it.
This was very helpful. Thanks for posting! The guy at the hardware store who told me I wouldn't get my dryer belt fixed in the same day definitely didn't see your video.
This video was a life saver!!! Was able to repair my dryer today after realizing that the drum stop moving. Very simple but yet effective video! Thank you 🙏🏾
I have exactly model. Was trying to go thru back panel til I saw your video. As for the upper plug you couldn't disconnect, mine had a tab and came apart in seconds. Now to search for my belt. Using number on belt. Thanks buddy.
Great video.Thanks. Additionally, I used a bungee cord to hold in the drum place while I worked. Also, my electrician connection was a Quick-Connect. Surprised what an easy fix this was. Thank you for the guidance.
Thanks for sharing the installation process of the replacement belt. Much easier than I thought, and way cheaper than having a repair person coming out and charging too much!
Thank you for the helpful video. I was hesitant at first but after not finding a repair person in my small town I looked this up and was amazed at how easy it was to swap out the belt. My dryer was making a screeching noise. Turned out the belt was good but lint build up was causing it to screech. I went ahead and replaced the belt since it only cost $8 on amazon, cleaned it out and used compressed air to dust out all the electronics in the back. It is worth noting that it is a good idea to keep an eye on the front clips that hold the screw in place.. I almost lost one. I also found it is easier to put the front panel together if you mark the clip on base and hole on front panel with a sharpie (i did not have any help and took me a couple of tries aligning clips) Thanks again... Have a great day!
Thanks a lot for making this video. My stupid dryer started making high pitch squeaks, and I thought it was going to a huge pain to change the belt. But no, you made this very easy and simple. Thanks a lot for the instructions. Thumb up
Thank you! We, like a lot of people, are struggling right now and this video saved us from having to replace the dryer or call someone. Hubby and I did it together and nobody cried or cussed!😊
Thank you so much for this!! Stressed me out when my dryer went out. Came across your body then boom…found about $3 in change and got my dryer back working!!’
Great video !! I couldn't figure out how the belt went over the tensioner pulley but was able to see it through your video . Thanks for saving my day 😊
Thanks! The instructions worked fine with the exception that I had to use pliers to bend the drum facing tab on the idler pulley just a small amount to get it to catch.
Bought mine from best buy in 2017. It just snapped today. So, here i am, looking for education. Thank u for taking the time to show me/us. A huge help to me to make this a very affordable diy project.
You’re amazing! I finally decided I would try to DIY it and your video was so easy and well explained. Followed you step by step real easily. I probably had it all done in 20-30 minutes. 🙏🏻
Your video was very helpful! I just wanted to say the "quick" release wire attached to the door panel can be released by pushing in that little tab with a pointy thing like a screw driver while gently pulling the two halves apart.
For anyone who winds up here with a NED5800HW model, this repair is done by taking off the top and back panel. Hopefully, I can save someone the hour I wasted trying to get it from the front. 😅 The pully routing part of this video was clutch. Thanks, OP!
Good Video.. I am an Electronic Tech, Retired but never fixed a dryer before, I know it is super simple" BUT " I just didn't know how to replace the belt. Now I know. Thank's to you. You have a New Sub. THank you for your help.
As a wife of a truck driver that is gone most of the time. I thank you so much for doing this video. I was able to fix our dryer myself and not have to buy a new one. I found $5.07 in my dryer.
Worked like a charm. Just finished changing my belt out, took only 15 minutes maybe. But the plug you had trouble with, there is a clip on one side (very had to see) lift the clip and the plug slides apart.
Thank you soooo much!!!! Your video was super easy to understand and I was able to follow you instructions exactly!!!! Not all hero’s wear capes!!!!!!! ❤
I love you. Like dude, i was struggling like "where is this belt supposed to go". Didn't know i had to feed it under the wheel thingy. Thank you. Keep doing what you're doing brother
I followed your video on my Amana dryer I put painters tape on the belt to keep from tweeting over until it was installed I also took my channel lock pliers to unclip the black electric wire clip on the right side took the front panel and moved it to the side
Thank you. You made it easy to do. Like I noticed in other comments, the tensioner required I look at your vid again and now the dryer works better than it has for years. The old belt was really shredded.
Dude... Not only was I successful in repairing our dryer today, but I also found 3 gold rings. Two of them have precious stones and have been missing more than a decade. There was a bunch of change also.
Thanks, Chaotic Lizzards et al. The tutorial, along with the comments to disconnect the power source clip and the bungee cord to hold the drum, made all the difference in the world 🌎! Can't wait for another belt to break! (Well, maybe that's getting a lil' too carried away...)
Great video. That white plastic wiring connector does come apart. There is a tab on the top you pull lightly up on that tab and at the same time then pull the two pieces away from each other
thank you so much looks pretty easy my 83 year old neighbor asked me to take a look at her dryer for her i'm sure i can help her out now that i watched your video
Great way to start my New Year's January 1st 2023 belt broke just got the belt today and installed it with the help of this video I wish nothing but good things to you much love
Brother....iam a concrete guy..and my clothes destroys dryer and I was about to go buy a new one and your vodeo helped me fix myself ❤❤❤❤ your awesome possum.
Thank you, I ended up taking out the drum just to check all the wheels and vacuum out all that lint. Going to home Depot to get the belt today. Wish me luck!
Very nice, don't know how I missed that. But it is very important, and some people just don't have what it takes to do the right thing first. Common sense. So glad you did include it in your video. Nice job I am sure it is helpful to them who need it. well done. And Mahalo for responding and showing me what I missed. Keep up the great job.
Hey, thank you for the encouraging words, I appreciate that! I should have put that part in the beginning of the video, because you are exactly right, the first thing you should do is unplug it👍 oh well, live & learn, getting better every video! Thank you for watching!!
Thanks for this video. It made replacing the belt easy. However I can't get the front back on now. How in the devil do you get the bottom clips on the front to snap into place when reinstalling the front? I can't figure it out for the life of me.
Hey, I can’t say for sure but i do know it was kind of a bitch. just play around with it and try to get it in there, when all else fails, I tend to use a little “persuasion” if you know what I mean 👊 thank you for watching and supporting my channel🙂
Literally worked exactly how you showed, was having problems with that connector like you said and followed everything you said to a T, works perfectly now.
Let me tell you my dryer wasn't working for 3 days. I didn't even know how to fix it. I didn't want to call anybody. I was going to buy a whole new one. Then my husband saw your video. I went to Lowe's and I bought a belt. I took it apart as you showed me and I put it together. He helped me put on the door. I am so grateful for you. Thank you from this mom of five...What else can you teach me? ❤❤❤❤🎉
Hey-thanks for this. Thankfully, after following your video, I was able to get the dry going again! But when I reattaching the vent to the top, I dropped one of the screws down the vent! Do I have to dismantle the whole thing or will it be okay to leave it? I’m hoping it’s sitting somewhere on the bottom of the dryer and won’t interfere with the drum when dryer is in? 🙏
Cool video a question do I need a new timer because I put on any number to make a lot of noise and I don't put start button yet the noise sounds like crackling
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Thank you all for the encouraging words and taking the time to watch this video, you have all helped my channel grow and I appreciate you all more than you know😀
Please consider subscribing and becoming a member so we can keep achieving success😎😎😎Lots of good stuff coming soon, next couple of months it’s been a long year,
Thank you again my friends love you all
So thankful for this video! Single mom here, in nursing school with a tight budget. My dryer quit working and I thought I was going to have to replace it. Thankfully I found your video and it made it so much easier (and cheaper lol)!! Appreciate you taking time to teach others!
What can i do if my screws on the lint trap are stripped
try pliers, they also sell kits for backing out stripped screw
@@Timkrutzmusic.
Your comment is what convinced me to try it myself, so thank you. And thank you OP for making this video, it worked perfectly.
Awesome job mom you rock!
Thank you thank you, i just finished 30 mins ago fixing my dryer with your step by step instructions, great job with the video content, thanks once again. It's working again, i saved money 💰. I feel like a technician now 😂. Thank you.
For real, the way you explained all of that made it so much more simple than All of the other videos I watched so far
Thank you for this video. I never even took apart a dryer and today you helped me replace the belt and showed me where the tension wheel goes and how to run the belt through it.
Love to hear it my friend, glad it helped, and I thank you for watching my video,
best of luck to you
Thank you for this SETP by STEP video. Clear and to the point! Big help!!!
You’re welcome👍 thank you for watching
This was very helpful. Thanks for posting! The guy at the hardware store who told me I wouldn't get my dryer belt fixed in the same day definitely didn't see your video.
My husband and I just fixed our Amana drying machine
Thanks to this video
Very helpful
Thanks for watching and for the kind words 👍👍👍
Great video, I have the exact same dryer and just couldn’t figure out the belt routing around the tensioner. Makes sense now! Thank you!
This video was a life saver!!! Was able to repair my dryer today after realizing that the drum stop moving.
Very simple but yet effective video!
Thank you 🙏🏾
I have exactly model. Was trying to go thru back panel til I saw your video. As for the upper plug you couldn't disconnect, mine had a tab and came apart in seconds. Now to search for my belt. Using number on belt. Thanks buddy.
Great video.Thanks. Additionally, I used a bungee cord to hold in the drum place while I worked. Also, my electrician connection was a Quick-Connect. Surprised what an easy fix this was. Thank you for the guidance.
Worked exactly like the video said it would. I even fixed it myself while my husband was at work!!😮
Thanks for sharing the installation process of the replacement belt. Much easier than I thought, and way cheaper than having a repair person coming out and charging too much!
Excellent, straightforward instructions! Thank you so much for this!
Thank you for the helpful video. I was hesitant at first but after not finding a repair person in my small town I looked this up and was amazed at how easy it was to swap out the belt. My dryer was making a screeching noise. Turned out the belt was good but lint build up was causing it to screech. I went ahead and replaced the belt since it only cost $8 on amazon, cleaned it out and used compressed air to dust out all the electronics in the back. It is worth noting that it is a good idea to keep an eye on the front clips that hold the screw in place.. I almost lost one. I also found it is easier to put the front panel together if you mark the clip on base and hole on front panel with a sharpie (i did not have any help and took me a couple of tries aligning clips) Thanks again... Have a great day!
I would have struggled trying to get the front off without your video. Thank you.
Thanks, perfect how to video, i wish other repair video makers would watch yours first to see how to do it.
Hahaha
Thank you, your was more easy and understanding. I found 5 dollar worth change in my dryer
Thanks a lot for making this video. My stupid dryer started making high pitch squeaks, and I thought it was going to a huge pain to change the belt. But no, you made this very easy and simple. Thanks a lot for the instructions. Thumb up
Appreciate it! Glad I could help. 👍
Thank you! We, like a lot of people, are struggling right now and this video saved us from having to replace the dryer or call someone. Hubby and I did it together and nobody cried or cussed!😊
Thank you so much for this!! Stressed me out when my dryer went out. Came across your body then boom…found about $3 in change and got my dryer back working!!’
Thanks man. Your video was very easy to follow and good camera work. Helped me change my belt so easily. Less than 15 minutes. Thank you.
Hey wicked happy to hear that, thanks for watching 👍😎
Great video !! I couldn't figure out how the belt went over the tensioner pulley but was able to see it through your video . Thanks for saving my day 😊
Thank you for watching 😃😃
Thanks! The instructions worked fine with the exception that I had to use pliers to bend the drum facing tab on the idler pulley just a small amount to get it to catch.
Bought mine from best buy in 2017. It just snapped today. So, here i am, looking for education. Thank u for taking the time to show me/us. A huge help to me to make this a very affordable diy project.
Watched your video and totally fixed my dryer! Thanks!
Wow. This is step by step excellent. THANK YOU!
You’re amazing! I finally decided I would try to DIY it and your video was so easy and well explained. Followed you step by step real easily. I probably had it all done in 20-30 minutes. 🙏🏻
Your video was very helpful! I just wanted to say the "quick" release wire attached to the door panel can be released by pushing in that little tab with a pointy thing like a screw driver while gently pulling the two halves apart.
For anyone who winds up here with a NED5800HW model, this repair is done by taking off the top and back panel. Hopefully, I can save someone the hour I wasted trying to get it from the front. 😅
The pully routing part of this video was clutch. Thanks, OP!
Good Video.. I am an Electronic Tech, Retired but never fixed a dryer before, I know it is super simple" BUT " I just didn't know how to replace the belt. Now I know. Thank's to you. You have a New Sub. THank you for your help.
As a wife of a truck driver that is gone most of the time. I thank you so much for doing this video. I was able to fix our dryer myself and not have to buy a new one. I found $5.07 in my dryer.
Thank you so much, $15 repair. Quick and easy thanks to your video. You're a good man.
Worked like a charm. Just finished changing my belt out, took only 15 minutes maybe. But the plug you had trouble with, there is a clip on one side (very had to see) lift the clip and the plug slides apart.
Just needed to know where the pulley went. Thank you good sir.
Great vid! I replaced mine, same model, and with all the change I found, the belt was free!
Thank you for making this easy! First time I try something like this and you made it easy to do it with your straight forward instructions
Just fixed my grandmas dryer in like 15 min cause of ur video thank you !!! Saved her a ton of money !!
Awesome, glad it helped! 👍
THANK YOU!! This was a PERFECT instructional video!
Great video, saved me a lot of money either paying someone to fix it or buying a new dryer all together.
Thanks for watching
Bro this was the exact video with the exact dryer I needed . THANKS. My Friday just got way better
Thanks for the video. I was able to replace the belt on my dryer (same model) thanks to it. Got a repair kit on Amazon that included a pulley.
Awesome glad to hear it! 👍
Thanks for this!!! Saved me A BUNCH of time.
Thank you soooo much!!!! Your video was super easy to understand and I was able to follow you instructions exactly!!!! Not all hero’s wear capes!!!!!!! ❤
Thank you for posting this video, the step by step instructions made fixing my dryer so easy. And you saved me...Sooo Much Money ❤
I love you. Like dude, i was struggling like "where is this belt supposed to go". Didn't know i had to feed it under the wheel thingy. Thank you. Keep doing what you're doing brother
Thank you for this my brother
Excellent directions! You saved me a lot of money really appreciate it.
Thanks man! Very detailed and patient!
Appreciate the video, it made replacing my belt much easier.
Great to hear!
Thank you!! I got my dryer fixed with this 👌👍👍
thank you so much for the simple but detailed viseo.. i have the same
unit and theres only 1 belt left at our lowes😂 big help!
Glad it helped
Why can't all instructional videos be this good?
Thank you for this! Just tore mine apart and it wasn't as hard as I thought it was going to be!!!!!
I followed your video on my Amana dryer I put painters tape on the belt to keep from tweeting over until it was installed I also took my channel lock pliers to unclip the black electric wire clip on the right side took the front panel and moved it to the side
Thank you so much for the informative video👍 You Sir. Are a Godsend. Just fixed my dryer problem thanks to you. Have a blessed day my friend.
Thank you. You made it easy to do. Like I noticed in other comments, the tensioner required I look at your vid again and now the dryer works better than it has for years. The old belt was really shredded.
Thank you for your help !! You made it very easy to understand. And yes I unplugged before I started working on it. 😂😂
Appreciate it man. Had a belt break a couple of days ago, this video helped a lot in fixing it myself.
I had an idea on how to do this job but the video is even better thanks again
Dude...
Not only was I successful in repairing our dryer today, but I also found 3 gold rings. Two of them have precious stones and have been missing more than a decade. There was a bunch of change also.
Thanks, Chaotic Lizzards et al. The tutorial, along with the comments to disconnect the power source clip and the bungee cord to hold the drum, made all the difference in the world 🌎! Can't wait for another belt to break! (Well, maybe that's getting a lil' too carried away...)
Great video. That white plastic wiring connector does come apart. There is a tab on the top you pull lightly up on that tab and at the same time then pull the two pieces away from each other
You saved me some money thanks for the clear and fast instructions
Yhanks alot buddy my first time replacing a belt
Yo man fkn thank you yo only video that gave me a clear view too pull the belt thru the tension i was dumbfounded forever
thank you so much looks pretty easy my 83 year old neighbor asked me to take a look at her dryer for her i'm sure i can help her out now that i watched your video
Nice! We gotta look out for our elders for sure!!!!! Hope you were able to help her out😎
Great way to start my New Year's January 1st 2023 belt broke just got the belt today and installed it with the help of this video I wish nothing but good things to you much love
Brother....iam a concrete guy..and my clothes destroys dryer and I was about to go buy a new one and your vodeo helped me fix myself ❤❤❤❤ your awesome possum.
Thank you, I ended up taking out the drum just to check all the wheels and vacuum out all that lint. Going to home Depot to get the belt today. Wish me luck!
Just the video I needed.I even found some snack change for the work vending machine.Thanks!
This was a great video and so helpful! Thank you!
Thanks for watching 👍
Thank you kind sir. You are a legend. God sent. Worked like a charm.
Thank u. I just fixed mine for heating problems next is this!
thanks so much.. this video made it very easy .. would have had to hire someone thanks again
I like the part about removing the lint filter. Easiest part to do.
Thanks man.Awesome video. 💪🏾💪🏾
fixed my dryer thanks to your video 🙌
Very nice, don't know how I missed that. But it is very important, and some people just don't have what it takes to do the right thing first. Common sense. So glad you did include it in your video. Nice job I am sure it is helpful to them who need it. well done. And Mahalo for responding and showing me what I missed. Keep up the great job.
Hey, thank you for the encouraging words, I appreciate that! I should have put that part in the beginning of the video, because you are exactly right, the first thing you should do is unplug it👍 oh well, live & learn, getting better every video! Thank you for watching!!
Thanks for the simple hands on explanation… here goes.. well, something 😂🤷♀️🤦♀️ Fingers crossed…
Legend Brother I stg thank you so much straightforward tutorial and answered all the questions I needed.
thank you for watching my friend
Because of your video, we got this done. Very much appreciate the detail on the belt tensioner 👍
Thanks for this video. It made replacing the belt easy. However I can't get the front back on now. How in the devil do you get the bottom clips on the front to snap into place when reinstalling the front? I can't figure it out for the life of me.
Hey, I can’t say for sure but i do know it was kind of a bitch. just play around with it and try to get it in there, when all else fails, I tend to use a little “persuasion” if you know what I mean 👊 thank you for watching and supporting my channel🙂
Thank u so much two girls just did a big girl thing thanks to u king
Literally worked exactly how you showed, was having problems with that connector like you said and followed everything you said to a T, works perfectly now.
This worked exactly as in the video!!! Thank you thank you thank you!! Saved me major money
I’m a RUclipsr myself lol. So I want to show love to your page since you helped me.
The wire harness comes off. If you flip it over(in your video) there’s a quick connect clip. Just slightly raise the clip up and pull apart
Thank you so much awesome video much appreciated 👏 😊
Thank you for watching😀
molex connections are held by a clip in most cases or just friction. mine was a clip i had to lift to pull it apart
Just helped me fix my issue! Thank you very much :)
Awesome! Thanks for the info, it's gonna come in handy!
Nice video, very helpful.
Thank you so much. I couldn't have done it without this video♡♡♡
Let me tell you my dryer wasn't working for 3 days. I didn't even know how to fix it. I didn't want to call anybody. I was going to buy a whole new one. Then my husband saw your video. I went to Lowe's and I bought a belt. I took it apart as you showed me and I put it together. He helped me put on the door. I am so grateful for you. Thank you from this mom of five...What else can you teach me? ❤❤❤❤🎉
Hey-thanks for this. Thankfully, after following your video, I was able to get the dry going again! But when I reattaching the vent to the top, I dropped one of the screws down the vent! Do I have to dismantle the whole thing or will it be okay to leave it? I’m hoping it’s sitting somewhere on the bottom of the dryer and won’t interfere with the drum when dryer is in? 🙏
you can leave it should be fine
Cool video a question do I need a new timer because I put on any number to make a lot of noise and I don't put start button yet the noise sounds like crackling
Thank you brother fixed mine under 5 minutes 👍
Thanks for watching!
Could you pls go into detail about putting the dryer back together but ur video sure was a big help ty
Thank you! Now do you have a trick for getting the front lined up by yourself while holding the drum up.
No sorry, it’s kind of a pain, just gotta work it in there
Great video very helpful!! 👍
Thanks for watching!