I always wear 2 anti static bands. one on my right hand and my left ankle. if you set 2 anti static bags one vertical and one horizontal the static that does make it to the second bag pushes off to the edge rather than through the other side.
+ASMR Labs They certainly aren't as fragile as thin fiber glass rods but I've still had bad experiences with the pins falling off or being bent, mostly because they're gold and gold isn't the sturdiest of metals. But hey it conducts the best and the last thing we need is a poor conduction between the CPU and motherboard. One good trick though (I've learned this from friends coming to me when they've installed the cpu wrong) is if the pins are just bent you can take something like a needle and gently straighten them. But either way I enjoyed the video, I actually hope to see more like this in the future, there aren't a lot of asmr tech videos (Related to computer building anyway) on youtube.
+YourName |CS:GO Content I know I already said it but stock fans have the paste pre-spread on the heatsink. I know from having to fix friends computers with fried cpus that a modern processor that's being used like a normal computer can't survive without thermal paste. Even the coolest of cpus need at least a heat spreader, arm processors are basically the only exception, they're a slightly more primitive and simplified CPU (The type in your phone or in the raspberry pi) and even then people will get heat spreaders for those if it's constantly under load.
pbrad08 cable management on a pc like this isnt really necessary since you can never see into the case and its never gona run hot enough for it to block the airflow (it could probably work fine with only a cpu cooler)
I think this guy already knows the risks and was doing a combo of trolling and just having fun making asmr sounds. XD He even put on the carpet again in the title, c'mon guys you know it's trolling.
Building a computer on the carpet? Oh man, that's the worst.. Even if it is laying on an 'anti-static' bag, only the inside is anti-static, the outside totally isn't. You had luck by your side!
There called pins i believe and all this anti static shit is a load of rubbish unless you decide to start shuffling you feet and rubbing the components on the carpet then grounding them. Its all about potential difference
TehLawlzer Well I had a lot of stuff happening in my life and did not visit my channel very often. Thats not an excuse for not explaining it though. Sorry.
Me too man, and remember how they kept saying windows 10 was gonna be the last one that'd just be infinitely updated and upgraded as like, an "evolving" OS? Now we got windows 11 lmao, I'm so tired of this monopoly.
connor Piper i know its a cheap quality psu (thus the reason i said it could probably only output 300w) but it shouldn't be needing to output alot of power to this pc so it should be ok
ictdude1 Well I bought a 150 W GPU shortly after making this video. That is the biggest GPU supportet by this PSU and it ran just fine, even though I had sometimes over 300W power consumption during gaming. Now I got a Thermaltake again - a 530W one, because I upgraded to a GPU with 250W and two power connectors and it works just fine.
I'm amazed by the large population who has completely missed the whole point of this video. Either you're completely baffled or don't know how to read.
working on carpet with the motherboard sitting on top of the ESD bag? if modern motherboards weren't idiot proofed, that thing would be fired. not to say that you're an idiot, just pointing out how hard it is to destroy a modern board by mistake.
Building a PC......on carpet....I see you live life on the edge also
Until now I've always built PCs on carpets and never had anything go wrong
AllenTsuna just be very very careful with that.
"On the carpet again" :D U tuk the joke! :D
wow the bubble wrap in the beginning was probably the worst part of the whole vid but okay vid after all
I always wear 2 anti static bands. one on my right hand and my left ankle. if you set 2 anti static bags one vertical and one horizontal the static that does make it to the second bag pushes off to the edge rather than through the other side.
Later note: You make very good choices in motherboards I must say.
Wow that moment when u scraped the CPU pins on the plastic I thought that CPU was going to be gone
+Wisconsintech81 Nah. Their tougher than you think.
+ASMR Labs They certainly aren't as fragile as thin fiber glass rods but I've still had bad experiences with the pins falling off or being bent, mostly because they're gold and gold isn't the sturdiest of metals. But hey it conducts the best and the last thing we need is a poor conduction between the CPU and motherboard. One good trick though (I've learned this from friends coming to me when they've installed the cpu wrong) is if the pins are just bent you can take something like a needle and gently straighten them. But either way I enjoyed the video, I actually hope to see more like this in the future, there aren't a lot of asmr tech videos (Related to computer building anyway) on youtube.
That moment he took the cpu out of the plastic case and scraped the metal prongs of the cpu on the plastic... that could have been devastating
this is the most cringeworthy video eVER
I do believe that is an APU
LestaLads it is a 6800k
Yen Syden actually it is an A10-6800k
@@AFKEpicPandas Don't care.
I love the risk man!!!
No thermal paste between cpu and fan??
It's gonna burn xD
+ZachBora It comes pre-applied on the bottom of the stock heat sink.
+xMrPoi oh ok thank god
+YourName |CS:GO Content I know I already said it but stock fans have the paste pre-spread on the heatsink. I know from having to fix friends computers with fried cpus that a modern processor that's being used like a normal computer can't survive without thermal paste. Even the coolest of cpus need at least a heat spreader, arm processors are basically the only exception, they're a slightly more primitive and simplified CPU (The type in your phone or in the raspberry pi) and even then people will get heat spreaders for those if it's constantly under load.
@@weichi_ bullshit
Jesus christ be careful with your damn cpu
Good vid but holy shit that cable management is a fuckin nightmare
pbrad08 cable management on a pc like this isnt really necessary since you can never see into the case and its never gona run hot enough for it to block the airflow (it could probably work fine with only a cpu cooler)
The nostalgia x 2
I think this guy already knows the risks and was doing a combo of trolling and just having fun making asmr sounds. XD He even put on the carpet again in the title, c'mon guys you know it's trolling.
What case is that?
I love the triggers this vid gives but im not a fan of amd but other that good selection of parts and thanks for triggering me
Thermal paste?
thànks
What a funky HDD bay
Why did you stop making videos they where actually pretty goood
Nice
Would've liked to see more cable management with zip ties :)
Love your voice
Don’t push on cpu when putting it in motherboard. You can break a pin
I wish there wasn't all those plasting bags ruining my ear every 2min, literally more stressful than relaxing
Building a computer on the carpet? Oh man, that's the worst..
Even if it is laying on an 'anti-static' bag, only the inside is anti-static, the outside totally isn't.
You had luck by your side!
+Jordy Vlassembrouck
I guess i've had luck on my side for 15 years.
you really shouldn't live on the edge :p
What the heck man. Do not touch those processor needles.
There called pins i believe and all this anti static shit is a load of rubbish unless you decide to start shuffling you feet and rubbing the components on the carpet then grounding them. Its all about potential difference
Little Shweenz True dat.
RIP CPU ur candle burned out long before your legend ever did.
Note to self use thermal past next time. 😂
+Charles sorb Its usually preapplied
Wondering how much static discharge went into this build 🤣🤣🤣
Can one build a Mac?
chutybutyful no, apples a bitch, but a hackintosh is possible just difficult
Why did you stop making videos?
TehLawlzer Well I had a lot of stuff happening in my life and did not visit my channel very often. Thats not an excuse for not explaining it though. Sorry.
+ASMR Labs I hope whatever was / is happening gets better
God i miss Windows 7
Me too man, and remember how they kept saying windows 10 was gonna be the last one that'd just be infinitely updated and upgraded as like, an "evolving" OS? Now we got windows 11 lmao, I'm so tired of this monopoly.
I would not be surprised if that PSU burst into flames or just broke.
nah, its Ok.
connor Piper its not exactly a power hungry pc even if that psu could barely output 300w its still enough for this pc
ictdude1 No, the quality is the issue. My old TR2 was a piece of shit, and this is worse.
connor Piper i know its a cheap quality psu (thus the reason i said it could probably only output 300w) but it shouldn't be needing to output alot of power to this pc so it should be ok
ictdude1 Well I bought a 150 W GPU shortly after making this video. That is the biggest GPU supportet by this PSU and it ran just fine, even though I had sometimes over 300W power consumption during gaming.
Now I got a Thermaltake again - a 530W one, because I upgraded to a GPU with 250W and two power connectors and it works just fine.
Who’s Watching This in 2024🎉🎉🎉🎉
👇
I'm amazed by the large population who has completely missed the whole point of this video. Either you're completely baffled or don't know how to read.
thank you.
4:24 haha xD
working on carpet with the motherboard sitting on top of the ESD bag? if modern motherboards weren't idiot proofed, that thing would be fired. not to say that you're an idiot, just pointing out how hard it is to destroy a modern board by mistake.