I didn't know you fished! That's awesome! Been enjoying your videos about GoPro microphones. I'm thinking about purchasing the ETM-001. Thanks for all the great information!
Thanks very much for your video which introduced me to the ETM-001 mic. It fits perfectly on the shooting platform first constructed by You-tuber Kyle Martin Tech and demonstrated by him several years ago. I had plenty of room to put the admittedly over-sized mic adapter where it would best fit and the mic plugged in directly but doesn't show even in the camera's wide angle view. Now I have much better audio; thanks again. Wish I could attach a picture of the setup; it turned out pretty nice-looking.
The video I've been looking for and found it randomly searching for GoPro cycling vlog audio setup... awesome video..just saved me money buying a rode wireless Go..My cycling vlogs always suffer from bad audio..I hope this setup will help big time
Thank you for this test, very informative! Does the microphone make no noise in a quiet environment? I would like to buy it because the microphone on my phone makes too much noise in a quiet environment. Thank you.
Nice review of it. I’ve been using the saramonic mic for a few months now. In high winds the audio starts cracking. I wonder if the etm one does this as well. Thinking of buying it.
Really helpful videos! Is this set up robust enough to handle taking it on a run? Ive just started some run vloging vids with my hero 5 and desperately want to improve the audio... Thanks!
Have you tried the Edutige on a DSLR? I have the Nikon 5300. I bought the Sony ECM-DS70P to use on the Nikon and a GoPro Hero 2. I really can't tell any difference between the built in Nikon mic and the external Sony. I am assuming that the Nikon automatically uses the external when it is plugged in. I don't see any setting to select internal or external mic.
Path Less Pedaled CHEERS! you know your stuff! i turned off voice and shut the connection off of the app and the popping stopped! thanks a million bud!
I got the ETM-001 mic. The plug configuration is the same as that shown in your video. It is plugged into the Hero 6 black via the gopro mic adapter. For the life of me I can't hear much, if any difference. Could you please review the settings that you use?
Question: with the build-in mic you get a lot of sounds when your hitting the stick/tri-pod of the GoPro, how's that with this mic? (since there is still a lot of static mass from the mic to the GoPro stick)
I used my mic a couple of times, and then the next day I use it these popping noises show up in all of my videos. Any possible reason why? I have the same setup in your video.
Nevermind, I figured it out. When I had my mic placed next to a lot of other electronics (an old hand-held video recorder, my phone, and my laptop) it started making these weird popping noises. It wasn't until I took the camera and walked away from the other electronics it immediately stopped making these noises.
Path Less Pedaled that’s my next on my to-do. I actually had setup my gopro 5 and followed your steps to a tee. I planned on bringing this setup to the Philippines with me but I couldn’t fix the crackling sound issue. Ironically, I tried troubleshooting today and it worked on the first shot then it failed subsequent recordings. Overall, I think maybe with a different mic it should work. The gopro 5 is a solid camera in conjunction with the wireless my passport we drive it’s badass!!!! Sitting through tons of video now. Gopro 5 stock audio is meh but will have to do 👌🏽😊. Great job on the videos and tutorials. Your channel is very addictive! I wish I had more time to watch!
Are you using one-touch recording? Some firmware kills the audio in one touch mode. So many things can go wrong between the firmware and hardware so its hard to pinpoint.
Path Less Pedaled OMG!!!! You were right about the one touch messing with audio!!! I tried it out this morning and it works perfectly!!!! Thank you soooooooo much!!!!
Hi so I purchased the etm-100 mic and put it on my GoPro hero 7 I changed the settings on the output menu to standard plus and went back to see the footage of my bike ride and I heard some popping sounds everytime I started going downhill. Do you have any suggestions or what it can be I used it only with the small windmuff it came with
Path Less Pedaled ok I will try that I will be going on a ride tomorrow afternoon and see if there is any improvement on the sound thanks a lot I appreciate it
I didn't know you fished! That's awesome! Been enjoying your videos about GoPro microphones. I'm thinking about purchasing the ETM-001. Thanks for all the great information!
The audio sounds great, and the form factor is the best out there for sure
The test of the fishing footage sold me. Thanks!
Thanks very much for your video which introduced me to the ETM-001 mic. It fits perfectly on the shooting platform first constructed by You-tuber Kyle Martin Tech and demonstrated by him several years ago. I had plenty of room to put the admittedly over-sized mic adapter where it would best fit and the mic plugged in directly but doesn't show even in the camera's wide angle view. Now I have much better audio; thanks again. Wish I could attach a picture of the setup; it turned out pretty nice-looking.
I can’t believe there isn’t a mic that plugs directly into the GoPro. Seems bizarre/ridiculous .
gotta make more money off people, just like apple
The video I've been looking for and found it randomly searching for GoPro cycling vlog audio setup... awesome video..just saved me money buying a rode wireless Go..My cycling vlogs always suffer from bad audio..I hope this setup will help big time
Thank you for this test, very informative! Does the microphone make no noise in a quiet environment? I would like to buy it because the microphone on my phone makes too much noise in a quiet environment. Thank you.
No. It's not a studio mic.
Nice review of it. I’ve been using the saramonic mic for a few months now. In high winds the audio starts cracking. I wonder if the etm one does this as well. Thinking of buying it.
Been using the ETM exclusively the last year. Works great. Any mic in a hurricane will fail tho.
Great video. Just what I needed to see and hear. That’s made up my mind. Thanks.
Thanks, your video was a big help.
Nice fly tying vise in the background :D
Tried it, returned it. Felt too loose in the GoPro audio adapter and in my dslr. Like the diameter is just slightly too small.
definitely going to replace my saramonic with the 001 for my videos, thanks again Russ
thank you for the awesome video.
I didn't see any cards for the adapter vid or other prior vids. Did I just miss them?
ruclips.net/video/HSpwEW9rJ1U/видео.html
Path Less Pedaled
Thanks!
Is the dead cat placed over the foam that is already on the mic??
I usually place the wind muff directly on the mic in lieu of the foam.
Can I use my dead cat muff from my Saramonic?
Thanks for the vid. I'm inclined to buy the 001. BTW, what did you use to attach the mic adapter to the GoPro frame?
ruclips.net/video/HSpwEW9rJ1U/видео.html
Hello
This mic in gopro it's
1)standart mic
2)standart mic +
3) powered mic
4)powered mic +
5)line in?
Thanks
Really helpful videos! Is this set up robust enough to handle taking it on a run? Ive just started some run vloging vids with my hero 5 and desperately want to improve the audio... Thanks!
Nice review! Getting tired of vlogging on my 6d2
Where did you buy your sunglasses? I want one too.
Does the foam windscreen do as good of a job as the deadcat?
No. Should have the fuzzy thing as well.
Got it, thank you!
Have you tried the Edutige on a DSLR? I have the Nikon 5300. I bought the Sony ECM-DS70P to use on the Nikon and a GoPro Hero 2. I really can't tell any difference between the built in Nikon mic and the external Sony. I am assuming that the Nikon automatically uses the external when it is plugged in. I don't see any setting to select internal or external mic.
do you notice a POPPING sound when on standard non-power mic on yours?
No. Some popping and clicking can be caused by cellular signals / WiFi. So keep it away from your phone or put it in airplane mode.
Path Less Pedaled CHEERS! you know your stuff! i turned off voice and shut the connection off of the app and the popping stopped! thanks a million bud!
I got the ETM-001 mic. The plug configuration is the same as that shown in your video. It is plugged into the Hero 6 black via the gopro mic adapter. For the life of me I can't hear much, if any difference. Could you please review the settings that you use?
Great videos. I bought both 001 & 008. Can you recommend a windscreen for both mics? Reviews are conflicting. Thanks!
I use lavalier wind muffs. Should be linked in the description below.
the right angle adapter you use in the video is TRRS. does it compatible with gopro’s adapter???
Use the TRS.
Does the gopro audio adapter support trrs right angle adapter ?
TRS. Changing the link. amzn.to/2K0ibAx
Question: with the build-in mic you get a lot of sounds when your hitting the stick/tri-pod of the GoPro, how's that with this mic?
(since there is still a lot of static mass from the mic to the GoPro stick)
No self sound.
I used my mic a couple of times, and then the next day I use it these popping noises show up in all of my videos. Any possible reason why? I have the same setup in your video.
Nevermind, I figured it out. When I had my mic placed next to a lot of other electronics (an old hand-held video recorder, my phone, and my laptop) it started making these weird popping noises. It wasn't until I took the camera and walked away from the other electronics it immediately stopped making these noises.
Those small mics and GoPro aren’t very well shielded.
Is there anything in the settings I need to change? I have everything set up with the adapter and the saramonic mic and I get no sound.
How are you using it? One touch operation? Or powering on then recording?
Also the audio in the menu should show you have an external mic.
Path Less Pedaled Power and record. And I take different takes and none of them have audio.
Path Less Pedaled it does show I have an external mic connected. But there is no audio.
Are you using a right angle adaptor or straight into the box? If using a right angle adaptor, try it without.
i did not know that cast had a name, thanks
I bought the saramonic and I just get crackling noises. Its disappointing. How is it you got your saramonic to work ok?
Have you tried another mic with the adaptor to narrow down if it is the mic or not?
Path Less Pedaled that’s my next on my to-do. I actually had setup my gopro 5 and followed your steps to a tee. I planned on bringing this setup to the Philippines with me but I couldn’t fix the crackling sound issue. Ironically, I tried troubleshooting today and it worked on the first shot then it failed subsequent recordings. Overall, I think maybe with a different mic it should work. The gopro 5 is a solid camera in conjunction with the wireless my passport we drive it’s badass!!!! Sitting through tons of video now. Gopro 5 stock audio is meh but will have to do 👌🏽😊. Great job on the videos and tutorials. Your channel is very addictive! I wish I had more time to watch!
Are you using one-touch recording? Some firmware kills the audio in one touch mode. So many things can go wrong between the firmware and hardware so its hard to pinpoint.
Path Less Pedaled Ykes I didn’t think about that avenue but will sure test this as well! I’ll keep you posted! Thank you for all the help! 😊
Path Less Pedaled OMG!!!! You were right about the one touch messing with audio!!! I tried it out this morning and it works perfectly!!!! Thank you soooooooo much!!!!
Hi so I purchased the etm-100 mic and put it on my GoPro hero 7 I changed the settings on the output menu to standard plus and went back to see the footage of my bike ride and I heard some popping sounds everytime I started going downhill. Do you have any suggestions or what it can be I used it only with the small windmuff it came with
Popping sounds mean RF interference. Make sure it’s not near a phone when in use and shut off all WiFi functionality.
Also if it is wind noises I would suggest using the lavalier muffs we have linked in the description. The foam cover is not enough.
Path Less Pedaled ok I will try that I will be going on a ride tomorrow afternoon and see if there is any improvement on the sound thanks a lot I appreciate it
would you recommend this setup with the evo gp pro gimbal?
prob wont work with that gimbal.
I've been trying to find a setup similar to this with a wearable gimbal to see if it picks up motor noise has anyone tried it?
Works with hero 6 ??? please answer me :)
Please Please please answer me, What do I buy for my hero 6? adapater right with 3 black rings & etm 001 with 2 black rings ?
GUTE KAMERA